当前位置：文档库 › SMP

SMP

1SMP

Interface Dimensions SMP Code 19

SMP

REFERENCE PLANE

Referenzebene

REFERENCE PLANE

Referenzebene

FEMALE

Kuppler

MALE

Stecker

D A B C A

Male | Stecker Female | Kuppler

dimension [mm]Smooth bore Limited detent Full detent

min.max.min.max.min.max.min.max.

A0.3560.4060.3560.4060.3560.4061)

B 3.125 3.225 2.998 3.098 2.896 2.996

C 3.531 3.683 3.531 3.683 3.531 3.6831) 3.43

D 3.125 3.225 3.125 3.2250.00

E 2.74 2.84 2.74 2.84 2.74 2.840.000.20

F 1.143 1.397 1.143 1.397 1.143 1.397 3.35

G0.8390.9390.8390.9390.8390.939

H 1.397 1.447 1.397 1.447

I 1.982 2.082 1.982 2.082

K 2.185 2.285 2.185 2.285

1) resilient, dimension to meet electrical and mechanical requirements

SMP coaxial connectors are available as smooth bore, catchers mitt, limited detent and full detent versions, they are suitable for a wide range of board-to-board interconnect applications up to 40 GHz - from low up to the highest mechanical loads, e. g. in telecommunication, test & measurement or aerospace applications.

PCB connectors are supplied in blister tapes.

SMP-Koaxial-Steckverbinder werden in den Festhaltevarianten Smooth bore, Catchers mitt, Limited detent und Full detent angeboten und eignen sich für vielseitige Board-to-Board-Verbindungen bis 40 GHz von geringer bis zu h?chster mechanischer Beanspruchung, z. B. in Telekom- und Messtechnik-Anwendungen bis zu Anwendungen in Luft-und Raumfahrt.

PCB-Steckverbinder werden in Blistergurt-Verpackungen ausgeliefert.

Features

Interface according to US MIL-STD 348A, Fig. 326

Frequency range DC to 40 GHz

Return loss (cable connector straight) ≥ 14 dB (typ.)

Impedance 50 Ω

Minimum board-to-board distance ≥ 9.05 mm

Snap-on coupling

S M P L o n g w i p e -S M P M i n i -S M P

Technology

Technical Data SMP Code 19

Applicable standards | Anwendbare Normen Interface according to | Interface gem??

MIL-STD-348A, Fig. 326Quality tested according to | Qualit?tsprüfung gem??MIL-STD-202

Electrical data | Elektrische Daten Impedance | Wellenwiderstand 50 Ω Frequency range | Frequenzbereich

DC to 40 GHz Return loss (cable connector straight) | Rückflussd?mpfung (Kabelsteckverbinder gerade)≥ 14 dB (typ.)Insertion loss | D?mpfung

≤ 0.1 x √f (GHz) dB Insulation resistance | Isolationswiderstand

≥ 5 G Ω Center contact resistance | übergangswiderstand Innenleiter ≤ 6 m Ω Outer contact resistance | übergangswiderstand Au?enleiter ≤ 2 m Ω Test voltage | Prüfspannung 500 V rms Working voltage | Betriebsspannung 335 V rms Power handling | Leistungsbelastbarkeit 65 W @ 2.2 GHz Contact current | Kontaktstrombelastbarkeit ≤ 1.2 A DC

Mechanical data | Mechanische Daten Mating cycles | Steckzyklen

Full detent: ≥ 100Limited detent: ≥ 500

Smooth bore, Catchers mitt: ≥ 1000Center contact captivation | Innenleiter Haltekraft axial: ≥ 7 N

Engagement force | Steckkraft

Full detent: ≤ 68 N Limited detent: ≤ 45 N

Smooth bore, Catchers mitt: ≤ 9 N Disengagement force | Ziehkraft

Full detent: ≥ 22 N Limited detent: ≥ 9 N

Smooth bore, Catchers mitt: ≥ 2.2 N Board-to-board distance (min.) | Board-to-Board Abstand (min.)9.05 mm Environmental data | Umweltdaten Temperature range | Temperaturbereich -65 °C to +155 °C

Thermal shock | Temperaturzyklen

MIL-STD-202, Method 107, Condition B Moisture resistance | Feuchtigkeitsbest?ndigkeit MIL-STD-202, Method 106

Vibration | Vibration MIL-STD-202, Method 204, Condition B Shock | Schock

MIL-STD-202, Method 213, Condition A Max. soldering temperature (PCB connectors) | Max. L?ttemperatur (Leiterplattensteckverbinder)IEC 61760-1, +260 °C for 10 sec.

Materials | Materialien

PTFE / PEEK / LCP

Rosenberger-connectors fulfill in principle the indicated data of the Technical Data.Individual values of connectors may deviate depending upon application, design,type of cable, assembly method and execution. Specific data sheets for particular products can be provided on request from your Rosenberger sales partner.

Rosenberger-Steckverbinder erfüllen grunds?tzlich die in den Technischen Daten angegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und -aus-führung k?nnen einzelne Werte von Steckverbindern hiervon abweichen. Spezifische Datenbl?tter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenber-ger-Ansprechpartner.

Cable Connectors Semi-Rigid Cables

Straight Plug, solder

Semi-Rigid Cables Panel mount; hexagonal flange

Straight Jack, solder Semi-Rigid Cables

Right Angle Jack, solder Semi-Rigid Cables

S M P L o n g w i p e -S M P M i n i -S M P

Cable Connectors - Flexible Cables

Straight Jack, crimp

Flexible Cables

Right Angle Jack, solder-crimp

Flexible Cables

Panel Connectors - Coaxial End

Panel Plug, hexagonal flange Coaxial End

Panel Plug, hermetic sealed Coaxial End

Panel Jack Coaxial End

S M P L o n g w i p e -S M P M i n i -S M P

PCB Connectors - SMD

Straight Plug

SMD

Straight Plug, Panel mount

SMD

Straight Jack/Plug Pair SMD

Right Angle Plug, PCB SMD

PCB Connectors - Solder Pin

Straight Plug, PCB Solder Pin

Right Angle Plug, PCB Solder Pin

S M P L o n g w i p e -S M P M i n i -S M P

Adaptors

Bullet female-female

When standard SMD-connectors are applied (e.g. 19 S 101-40M, 19 S 144-40M, ...).2)Bullets with special lengths on request.

3)Applying radial misalignment increases the minimum board-to-board distance in vertical direction by max. 0.2 mm. Please note: Solder paste thickness not included.

4)The maximum radial tolerance compensation is calculated by: sin(4°) x bullet length. Please note that the maximum possible misalignment of the axes to each other, as well as the maximum capture area of the PCB connectors (smooth bore types) have an impact on the quality and performance of the high frequency connection.5)The maximum radial tolerance is limited to 1.2 mm because of the limited guide in range of the second PCB connector.

Adaptors (In Series)

Adaptors (Inter Series)

S M P L o n g w i p e -S M P M i n i -S M P

Terminations

Termination Plug

Termination Jack

Special Tools

Extraction Tool

Soldering Gauge