5 VOLT NEGATIVE VOLTAGE REGULATOR
V I DC Input Voltage V O = -5V P D Power Dissipation
T j Operating Junction Temperature Range Maximum Junction Temperature T stg Storage Temperature Range
T L
Lead Temperature (Soldering, 10 sec)
35V
Internally limited –55°C to +125°C
125°C
–65°C to +150°C
300°C
MECHANICAL DATA
ABSOLUTE MAXIMUM RATINGS (T case = 25°C unless otherwise stated)
REF
8.255±0.6357.899(0. 056 ± 0.004)
* Lead Thickness for tin plate finish only.
Solder dip finish adds 2 to 10 mil thickness to all lead tip dimensions.
0.457 ± 0.102FEATURES
? 0.01%/V LINE REGULATION ? 0.3%/A LOAD REGULATION
? THERMAL OVERLOAD PROTECTION
? SHORT CIRCUIT PROTECTION
? SAFE OPERATING AREA PROTECTION
? 2% OUTPUT VOLTAGE TOLERANCE
H Package - TO-39 Metal
Pin 1 = Ground
Pin 2 = Vout Pin 3 = Vin
Pin 1 = Ground Pin 2 = N/C Pin 3 = N/C Pin 4 = Vout
Pin 5 = N/C Pin 6 = Vin Pin 7 = N/C Pin 8 = N/C
J Package = 8 Pin Ceramic DIP
DESCRIPTION
T he LM79M05AH and LM79M05AJ are 5V negative
0.5A Voltage Regulators providing 0.01% per Volt Line Regulation and 0.3% per amp load regulation.Protection includes safe operating Area current limiting and thermal.
- 4.9- 5
- 5.1- 4.8
- 5.2(V IN = -8 to -20V)
100
(V IN = -7 to -25V)
50
(V IN = -8 to -12V)
10030.51.3
(V IN = -8 to -12V)
10054
60(V IN = -10)
1.4
2.12.5-0.4
Parameter Test Conditions Min.Typ.Max.Unit V O
D V O D V O I d
D I Q
V N D V IN D V O I SC I PK
I O = 100mA V IN = -10V I O = 5mA to 350mA P D £P MAX
T j = –55 to +125°C I O = 500mA
I O = 500mA
I O = 5mA to 500mA V IN = -10V I O = 350mA V IN = -10V I O = 5 to 500 mA
V IN = -10V T j = –55 to +125°C I O = 500mA T j = –55 to +125°C
f = 10Hz to 100kHz f = 120Hz
I O = 500mA
T j = –55 to +125°C I O = 500mA V IN = -10V V IN = -10V I O = 5mA
T j = –55 to +125°C
Output Voltage*
Line Regulation*
Load Regulation*Quiescent Current*
Quiescent Current Change*
Output Noise Voltage Ripple Rejection Dropout Voltage*Short Circuit Current*Peak Output Current*Average Temperature
Coefficient of Output Voltage*ELECTRICAL CHARACTERISTICS (T j = 25°C unless stated)
THERMAL DATA
V
mV mV mA mA mA m V dB V A A mV / °C * Pulse Test:
t p £10ms , d £5%.
All characteristics are measured with a capacitor across the input of 0.22m F and a capacitor across the output of 0.1m F.Output Voltage changes due to changes in internal temperature must be taken into account separately.
Although power dissipation is internally limited, these specifications apply for up to 2W for the TO–39 package, and 1.05W for the CERDIP (J package).