当前位置：文档库 › B72210S2151K101中文资料

B72210S2151K101中文资料

Construction

I Round varistor element, leaded

I Coating: epoxy resin, flame-retardant to UL 94 V-0I Terminals: tinned copper wire

Features

I High-energy AdvanceD series E2

I High surge current ratings up to 10 kA I High energy ratings up to 325 J

I Wide operating voltage range 130 … 510 V RMS I

PSpice models

Approvals

I UL I CSA I VDE I

CECC

Taping

I For ordering information see page 206 ff, chapter “Leaded Varistors: Taping ”

Type designation

Detailed description of coding system on page 39, chapter “General Technical Information ”

General technical data Climatic category LCT UCT

Damp heat, steady state (93 % r.h., 40 °C)40/85/56

– 40 °C + 85 °C 56 days in accordance with IEC 60068-1

in accordance with IEC 60068-2-3Operating temperature – 40 … + 85 °C in accordance with CECC 42 000Storage temperature – 40 … + 125 °C

Electric strength 3 2,5 kV RMS in accordance with CECC 42 000Insulation resistance 3 10 M W in accordance with CECC 42 000

Response time

< 25 ns

SIOV-S 14 K 130 E2

Design

Rated diameter of varistor disk

AdvanceD series

Max. AC operating voltage Tolerance of varistor voltage

EPCOS metal oxide varistor Leaded Varistors AdvanceD Series

V RMS

V 130 130 130 130 130

140 140 140 140 140

150 150 150 150 150

175 175 175 175 175

210

Max. clamping voltage

340

360

395

455

545

V RMS

V 230 230 230 230 230

250 250 250 250 250

275 275 275 275 275

300 300 300 300 300

320

Max. clamping voltage

595

650

710

775

840

V RMS

V 385 385 385

420 420 420

460 460 460

510 510 510

Max. clamping voltage

1025

1120

1240

1355

±mm b max mm

7,0 9,0 12,0 15,5 21,5

7,0 9,0

7,09,012,015,521,57,09,012,015,521,57,09,012,015,521,57,09,012,015,521,57,09,0 ±mm

b max mm

12,015,521,512,015,521,5

The weight of varistors in

between these voltage classes can be interpolated.

±mm

b max mm

Herausgegeben von EPCOS AG

Unternehmenskommunikation, Postfach 801709, 81617 München, DEUTSCHLAND

( ++49 89 636 09, FAX (089) 636-2 2689

EPCOS AG 2002. Vervielf?ltigung, Ver?ffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne aus-drückliche Genehmigung der EPCOS AG nicht gestattet.

Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elek-troindustrie, soweit nichts anderes vereinbart wird.

Diese Broschüre ersetzt die vorige Ausgabe.

Fragen über Technik, Preise und Lieferm?glichkeiten richten Sie bitte an den Ihnen n?chstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente k?nnen aufgrund technischer Erfordernisse Gefahrstoffe ent-halten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zust?ndige Vertriebsgesellschaft ein-zuholen.

Published by EPCOS AG

Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY

( ++49 89 636 09, FAX (089) 636-2 2689

EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.

Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition.

For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representa-tives.

Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.