MPSW45, MPSW45A
MPSW45A is a Preferred Device
One Watt Darlington Transistors
NPN Silicon
Features
?Pb?Free Packages are Available*
MAXIMUM RATINGS
Rating Symbol Value Unit
Collector?Emitter Voltage MPSW45
MPSW45A V CES40
50
Vdc
Collector?Base Voltage MPSW45
MPSW45A V CBO50
60
Vdc
Emitter?Base Voltage V EBO12
Vdc
Collector Current ? Continuous I C 1.0Adc
Total Device Dissipation @ T A = 25°C Derate above 25°C P D 1.0
8.0
W
mW/°C
Total Device Dissipation @ T C = 25°C Derate above 25°C P D 2.5
20
W
mW/°
C
Operating and Storage Junction
Temperature Range
T J, T stg?55 to +150°C THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit Thermal Resistance, Junction?to?Ambient R q JA125°C/W Thermal Resistance, Junction?to?Case R q JC50°C/W Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected.
*For additional information on our Pb?Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
https://www.wendangku.net/doc/c66449840.html,
Preferred devices are recommended choices for future use and best overall value.
See detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet.
ORDERING INFORMATION
ELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted)
Characteristic Symbol Min Max Unit OFF CHARACTERISTICS
Collector?Emitter Breakdown Voltage
(I C = 100 m Adc, V BE = 0)MPSW45
MPSW45A V(BR)CES
40
50
?
?
Vdc
Collector?Base Breakdown Voltage
(I C = 100 m Adc, I E = 0)MPSW45
MPSW45A V(BR)CBO
50
60
?
?
Vdc
Emitter?Base Breakdown Voltage
(I E = 10 m Adc, I C = 0)
V(BR)EBO12?Vdc
Collector Cutoff Current
(V CB = 30 Vdc, I E = 0)MPSW45 (V CB = 40 Vdc, I E = 0)MPSW45A I CBO
?
?
100
100
nAdc
Emitter Cutoff Current
(V EB = 10 Vdc, I C = 0)
I EBO?100nAdc ON CHARACTERISTICS (Note 1)
DC Current Gain
(I C = 200 mAdc, V CE = 5.0 Vdc)
(I C = 500 mAdc, V CE = 5.0 Vdc)
(I C = 1.0 Adc, V CE = 5.0 Vdc)h FE
25,000
15,000
4,000
150,000
?
?
?
Collector?Emitter Saturation Voltage
(I C = 1.0 Adc, I B = 2.0 mAdc)
V
CE(sat)? 1.5Vdc
Base?Emitter Saturation Voltage
(I C = 1.0 Adc, I B = 2.0 mAdc)
V BE(sat)? 2.0Vdc
Base?Emitter On Voltage
(I C = 1.0 Adc, V CE = 5.0 Vdc)
V BE(on)? 2.0Vdc SMALL?SIGNAL CHARACTERISTICS
Current?Gain ? Bandwidth Product
(I C = 200 mAdc, V CE = 5.0 Vdc, f = 100 MHz)
f T100?MHz
Collector?Base Capacitance
(V CB = 10 Vdc, I E = 0, f = 1.0 MHz)
C cb? 6.0pF
1.Pulse Test: Pulse Width v 300 m s; Duty Cycle v
2.0%.
Figure 1. Transistor Noise Model
NOISE CHARACTERISTICS
(V CE = 5.0 Vdc, T A = 25°C)
50
100
20050020
Figure 4. Total Wideband Noise Voltage R S , SOURCE RESISTANCE (k Ω)
Figure 5. Wideband Noise Figure
R S , SOURCE RESISTANCE (k Ω)
5.05070100200
3010
20
10e n , N O I S E V O L T A G E (n V )
V T , T O T A L W I D E B A N D N O I S E V O L T A G E (n V )
SMALL?SIGNAL CHARACTERISTICS
5.0
7.01020
3.0
2.0200 k C , C A P A C I T A N C E (p F )
h F E , D C C U R R E N T G A I N
100 k 70 k 50 k 30 k 20 k 10 k 7.0 k 5.0 k 3.0 k
2.0 k
Figure 10. “On” Voltages I C , COLLECTOR CURRENT (mA)
Figure 11. Temperature Coefficients
I C , COLLECTOR CURRENT (mA)
1.6
V , V O L T A G E (V O L T S )
1.41.2
1.00.80.6
r (t ), T R A N S I E N T T H E R M A L R E S I S T A N C E (N O R M A L I Z E D )
Figure 13. Active Region Safe Operating Area V CE , COLLECTOR?EMITTER VOLTAGE (VOLTS)
1.0 k 0.470050030020010070503020100.6
1.0
2.0 4.0 6.01020I C , C O L L E C T O R C U R R E N T (m A )
Design Note: Use of Transient Thermal Resistance Data
PEAK PULSE POWER = P P
ORDERING INFORMATION
Device
Package Shipping ?MPSW45TO?925,000 Units / Box MPSW45G TO?92(Pb?Free)5,000 Units / Box MPSW45RLRE TO?922,000 / Tape & Reel MPSW45RLREG TO?92(Pb?Free)2,000 / Tape & Reel MPSW45A TO?925,000 Units / Box MPSW45AG TO?92(Pb?Free)5,000 Units / Box MPSW45ARLRA TO?922,000 / Tape & Reel MPSW45ARLRAG TO?92(Pb?Free)2,000 / Tape & Reel MPSW45AZL1TO?922,000 / Ammo Pack MPSW45AZL1G
TO?92(Pb?Free)
2,000 / Ammo Pack
?For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
PACKAGE DIMENSIONS
TO?92 (TO?226)CASE 29?10ISSUE AL
NOTES:
1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 198
2.
2.CONTROLLING DIMENSION: INCH.
3.CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED.
4.DIMENSION F APPLIES BETWEEN P AND L.
DIMENSIONS D AND J APPLY BETWEEN L AND K MIMIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM.
DIM MIN MAX MIN MAX MILLIMETERS
INCHES A 0.1750.205 4.44 5.21B 0.2900.3107.377.87C 0.1250.165 3.18 4.19D 0.0180.0210.4570.533F 0.0160.0190.4070.482G 0.0450.055 1.15 1.39H 0.0950.105 2.42 2.66J 0.0180.0240.460.61K 0.500???12.70???L 0.250??? 6.35???N 0.0800.105 2.04 2.66P ???0.100??? 2.54R
0.135???
3.43???
STYLE 1:
PIN 1.EMITTER
2.BASE
3.COLLECTOR
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION