外文文献及翻译doc
Criminal Law
1.General Introduction
Criminal law is the body of the law that defines criminal offenses, regulates the apprehension, charging, and trial of suspected offenders,and fixes punishment for convicted persons. Substantive criminal law defines particular crimes, and procedural law establishes rules for the prosecution of crime. In a democratic society, it is the function of the legislative bodies to decide what behavior will be made criminal and what penalties will be attached to violations of the law.
Capital punishment may be imposed in some jurisdictions for the most serious crimes. And physical or corporal punishment may still be imposed such as whipping or caning, although these punishments are prohibited in much of the world. A convict may be incarcerated in prison or jail and the length of incarceration may vary from a day to life.
Criminal law is a reflection of the society that produce it. In an Islamic theocracy, such as Iran, criminal law will reflect the religious teachings of the Koran; in an Catholic country, it will reflect the tenets of Catholicism. In addition, criminal law will change to reflect changes in society, especially attitude changes. For instance, use of marijuana was once considered a serious crime with harsh penalties, whereas today the penalties in most states are relatively light. As severity of the penalties
was reduced. As a society advances, its judgments about crime and punishment change.
2.Elements of a Crime
Obviously, different crimes require different behaviors, but there are common elements necessary for proving all crimes. First, the prohibited behavior designated as a crime must be clearly defined so that a reasonable person can be forewarned that engaging in that behavior is illegal. Second, the accused must be shown to have possessed the requisite intent to commit the crime. Third, the state must prove causation. Finally, the state must prove beyond a reasonable doubt that the defendant committed the crime.
(1) actus reus
The first element of crime is the actus reus.Actus is an act or action and reus is a person judicially accused of a crime. Therefore, actus reus is literally the action of a person accused of a crime. A criminal statute must clearly define exactly what act is deemed “guilty”---that is, the exact behavior that is being prohibited. That is done so that all persons are put on notice that if they perform the guilty act, they will be liable for criminal punishment. Unless the actus reus is clearly defined, one might not know whether or not on e’s behavior is illegal.
Actus reus may be accomplished by an action, by threat of action,
or exceptionally, by an omission to act, which is a legal duty to act. For example, the act of Cain striking Abel might suffice, or a parent?s failure to give to a young child also may provide the actus reus for a crime.
Where the actus reus is a failure to act, there must be a duty of care. A duty can arise through contract, a voluntary undertaking, a blood relation, and occasionally through one?s official position. Duty also can arise from one?s own creation of a dangerous situation.
(2)mens rea
A second element of a crime is mens rea. Mens rea refers to an individual?s state of mind when a crime is committed. While actus reus is proven by physical or eyewitness evidence, mens rea is more difficult to ascertain. The jury must determine for itself whether the accused had the necessary intent to commit the act.
A lower threshold of mens rea is satisfied when a defendant recognizes an act is dangerous but decides to commit it anyway. This is recklessness. For instance, if Cain tears a gas meter from a wall, and knows this will let flammable gas escape into a neighbor?s house, he could be liable for poisoning. Courts often consider whether the actor did recognise the danger, or alternatively ought to have recognized a danger (though he did not) is tantamount to erasing intent as a requirement. In this way, the importance of mens rea has
been reduced in some areas of the criminal law.
Wrongfulness of intent also may vary the seriousness of an offense. A killing committed with specific intent to kill or with conscious recognition that death or serious bodily harm will result, would be murder, whereas a killing affected by reckless acts lacking such a consciousness could be manslaughter.
(3)Causation
The next element is causation. Often the phrase “but for”is used to determine whether causation has occurred. For example, we might say “Cain caused Abel”, by which we really mean “Cain caused Abel?s death. ”In other words, …but for Cain?s act, Abel would still be alive.” Causation, then, means “but for” the actions of A, B would not have been harmed. In criminal law, causation is an element that must be proven beyond a reasonable doubt.
(4) Proof beyond a Reasonable Doubt
In view of the fact that in criminal cases we are dealing with the life and liberty of the accused person, as well as the stigma accompanying conviction, the legal system places strong limits on the power of the state to convict a person of a crime. Criminal defendants are presumed innocent. The state must overcome this presumption of innocence by proving every element of the offense charged against the defendant beyond a reasonable doubt to the
satisfaction of all the jurors. This requirement is the primary way our system minimizes the risk of convicting an innocent person.
The state must prove its case within a framework of procedural safeguards that are designed to protect the accused. The state?s failure to prove any material element of its case results in the accused being acquitted or found not guilty, even though he or she may actually have committed the crime charged.
3. Strict Liability
In modern society, some crimes require no more mens rea, and they are known as strict liability offenses. For in stance, under the Road Traffic Act 1988 it is a strict liability offence to drive a vehicle with an alcohol concentration above the prescribed limit.
Strict liability can be described as criminal or civil liability notwithstanding the lack mens rea or intent by the defendant. Not all crimes require specific intent, and the threshold of culpability required may be reduced. For example, it might be sufficient to show that a defendant acted negligently, rather than intentionally or recklessly.
1. 概述
刑法是规定什么试犯罪，有关犯罪嫌疑人之逮捕、起诉及审判，及对已决犯处以何种刑罚的部门法。刑事实体法是规定犯罪的法律，刑事程序法是规定刑事起诉规则的法律。在一个民主社会中，决定何
种行为时犯罪行为且处以何种刑罚是立法机关的职能。
在某些法域，死刑可能会被用于最严重的犯罪行为。而诸如鞭刑或者笞刑之类的身体刑或者肉刑仍可能被运用，尽管世界上绝大多数国家和地区已经废止了这些刑罚。已决犯可能被处以监禁刑，而刑期短则一天长则一生。
刑法是制定该法律之社会的一面镜子。在伊斯兰教国家（如伊朗），刑法能反映出《古兰经》的教义；在天主教国家中，刑法可能反映天主教的教义。此外，刑法的内容会不断变化，以反映社会的变化，特别是社会观点的变化。例如，吸食大麻曾经被视为严重的犯罪行，曾被处以重罚，而今天，大多数国家对此行为的处罚相对较轻。随着公众对吸食大麻的容忍度的增加，处罚的严厉程度也随之降低。随着社会的发展，社会对犯罪行为的处决和处罚也会随之改变。
2.犯罪构成要件
显而易见的是，构成犯罪的行为形式各异，但罪名的成立是要有一些共同的要件的。第一，犯罪行为必须是法律明文禁止的，如此，普通正常之人才会知道，从事什么样的行为时犯法的。第二，检方须证明被告人据有犯罪意图。第三，检方须证明因果关系的存在。最后，检方证明被告人犯罪的证据须达到排除合理怀疑的标准。
（1）犯罪行为
犯罪构成的第一个要件是犯罪行为。Actus是指行动或行为，reus 是指被依法指控犯有某种罪行的人。因此，它们的字面意思是被指控犯罪之人的行为。任何一部刑事制定法都必须清楚且精确地规
定什么样的邪行为构成犯罪，即到达什么样的行为是被法律禁止的行为。如此，所以的人才得以知悉，如果实施了某一犯罪行为，他们将即会受到刑事处罚。除非法律明确规定了何种行为属犯罪行为，否则谁都不可能知道某种行为是否犯法。
行为人的某一积极作为、构成威胁的行为或未能履行法定义务的不作为，均可构成犯罪行为的要件。例如，该隐击中亚伯的行为即足以构成这一要件，家长未能向幼子提供食物的，亦可能构成某一犯罪的要件。
在不作为构成犯罪行为的情况下，必须存在一个主意义务。这种义务可以产生于契约、自愿的承诺、血源关系，偶尔也产生于工作特性。该种义务也可能产生于某人自己造成的危险状况。
（2）犯罪意图
犯罪构成的第二个要件是犯罪意图。犯罪意图是指行为人犯罪时的心理状态。犯罪行为可通过物证或者目击证人来证明，而犯罪意图则难以确定。陪审团须独立判断被告人是否确有实施犯罪想的必要意图。
凡被告人认识到行为的危险性，但仍然决定去做这种行为的，即认定其具有一种较低标准的犯罪意图。此即为放任的心理状态。例如，该隐从墙上将煤气表扯下，并且知道这将使可燃的煤气逸入邻居的房间，则该隐可能要对造成的煤气中毒承担责任。法庭通常会考虑，行为人是否认识到了危险，或者说，是否应该认识到了这种风险。当然，仅要求某人本应该认识到危险（而事实上他并没有认识到），这等同
于取消了对犯罪意图的要求。这样，在刑法的一些领域中，犯罪意图的重要性就降低了。
意图的不正当性还可能改变某一犯罪行为的严重性。具有特定意图的杀害，或者意识到将导致死亡或者严重的身体伤害的杀害，属于谋杀罪而因放任行为造成的杀人罪可能是非预谋杀人罪。
（3）因果关系
因果关系式另外一个构成要件。通常人们会使用若非--则无短语去决定是否具有因果关系。例如，我们可能会说，该隐杀死了亚伯，在这句话中，我们要表达的真实意思是，该隐引起了亚伯的死亡。换言之，若非该隐的行为，亚伯本应继续活着。那么，因果关系的意思是：若非A的行为，B本不应受到伤害。在刑法中，因果关系是一个必须在排除合理怀疑的基础上证明的要件。
（4）排除合理怀疑的证明标准
刑事案件的结果往往事关被告人的生命和自由，也包括定罪而来的坏名声。考虑到这一事实，对于检方，旨在给嫌疑人定罪的这一权力而言，法律作出许多严格的限制。刑事被告人是被推定无罪的。检方必须对被告人所被指控罪名的每一构成要件都排除了合理怀疑，并达到了让所有陪审员满意的程度，才能推翻无罪推定。这就是美国法律保证清白之人入罪风险最小化的主要方法。
检方须在保障被告人的程序框架内证明其提出的观点。检方如不能证明其构成其观点的任何一个重要要件的，被告人只能是被无罪释放或被宣告无罪，尽管他或者她可能犯下了被指控的罪行。
3. 严格责任
在现代社会，一些罪名不要求犯罪意图要件。它们被称为严格责任犯罪。例如，根据《1988年道路交通法》，在酒精浓度超过规定限额的情况下驾车，就是一种严格责任犯罪。
严格责任可以被规定为刑事或民事责任，尽管被告人不具有犯罪意图或目的。并不是所以的犯罪都要求特定的犯罪意图，所以认定被告人有罪的门槛有可能降低。例如，证明被告人的行为存在过失即可，则无需证明故意或者放任。
建筑类外文文献及中文翻译
forced concrete structure reinforced with an overviewRein Since the reform and opening up, with the national economy's rapid and sustained development of a reinforced concrete structure built, reinforced with the development of technology has been great. Therefore, to promote the use of advanced technology reinforced connecting to improve project quality and speed up the pace of construction, improve labor productivity, reduce costs, and is of great significance. Reinforced steel bars connecting technologies can be divided into two broad categories linking welding machinery and steel. There are six types of welding steel welding methods, and some apply to the prefabricated plant, and some apply to the construction site, some of both apply. There are three types of machinery commonly used reinforcement linking method primarily applicable to the construction site. Ways has its own characteristics and different application, and in the continuous development and improvement. In actual production, should be based on specific conditions of work, working environment and technical requirements, the choice of suitable methods to achieve the best overall efficiency. 1、steel mechanical link 1.1 radial squeeze link Will be a steel sleeve in two sets to the highly-reinforced Department with superhigh pressure hydraulic equipment (squeeze tongs) along steel sleeve radial squeeze steel casing, in squeezing out tongs squeeze pressure role of a steel sleeve plasticity deformation closely integrated with reinforced through reinforced steel sleeve and Wang Liang's Position will be two solid steel bars linked Characteristic: Connect intensity to be high, performance reliable, can bear high stress draw and pigeonhole the load and tired load repeatedly.
文献翻译英文原文
https://www.wendangku.net/doc/c77645719.html,/finance/company/consumer.html Consumer finance company The consumer finance division of the SG group of France has become highly active within India. They plan to offer finance for vehicles and two-wheelers to consumers, aiming to provide close to Rs. 400 billion in India in the next few years of its operations. The SG group is also dealing in stock broking, asset management, investment banking, private banking, information technology and business processing. SG group has ventured into the rapidly growing consumer credit market in India, and have plans to construct a headquarters at Kolkata. The AIG Group has been approved by the RBI to set up a non-banking finance company (NBFC). AIG seeks to introduce its consumer finance and asset management businesses in India. AIG Capital India plans to emphasize credit cards, mortgage financing, consumer durable financing and personal loans. Leading Indian and international concerns like the HSBC, Deutsche Bank, Goldman Sachs, Barclays and HDFC Bank are also waiting to be approved by the Reserve Bank of India to initiate similar operations. AIG is presently involved in insurance and financial services in more than one hundred countries. The affiliates of the AIG Group also provide retirement and asset management services all over the world. Many international companies have been looking at NBFC business because of the growing consumer finance market. Unlike foreign banks, there are no strictures on branch openings for the NBFCs. GE Consumer Finance is a section of General Electric. It is responsible for looking after the retail finance operations. GE Consumer Finance also governs the GE Capital Asia. Outside the United States, GE Consumer Finance performs its operations under the GE Money brand. GE Consumer Finance currently offers financial services in more than fifty countries. The company deals in credit cards, personal finance, mortgages and automobile solutions. It has a client base of more than 118 million customers throughout the world
外文文献及其翻译电子政务信息
外文文献及其翻译电子政务信息 1.政府信息化的含义？ 政府信息化是指：政府有效利用现代信息和通信技术，通过不同的信息服务设施，对政府的业务流程、组织结构、人员素质等诸方面进行优化、改造的过程。 2.广义和狭义的电子政务的定义？ 广义的电子政务是指：运用信息技术和通信技术实现党委、人大、政协、政府、司法机关、军队系统和企事业单位的行政管理活动。（电子党务、电子人大、电子政协） 狭义的电子政务是指：政府在其管理和服务职能中运用现代信息和通信技术，实现政府组织结构和工作流程的重组优化，超越时间、空间和部门分隔的制约，全方位的向社会提供优质规范、透明的服务，是政府管理手段的变革。 3.电子政务的组成部分？ ①：政府部门内部办公职能的电子化和网络化； ②：政府职能部门之间通过计算机网络实现有权限的实时互通的信息共享； ③：政府部门通过网络与公众和企业间开展双向的信息交流与策； 4．理解电子政务的发展动力？ ①：信息技术的快速发展； ②：政府自身改革与发展的需要； ③：信息化、民主化的社会需求的推动； 5.电子政务的应用模式？
模式有：1.政府对公务员的电子政务（G2E）； 2.政府间的电子政务（G2G）； 3.政府对企业的电子政务（G2B）； 4.政府对公众的电子政务（G2C）； 6.电子政务的功能？ ①：提高工作效率，降低办公成本； ②：加快部门整合，堵塞监管漏洞； ③：提高服务水平，便于公众的监督； ④：带动社会信息化发展； 7.我国电子政务发展存在的主要问题？ ①：政府公务员与社会公众对电子政务的认识不足； ②：电子政务发展缺乏整体规划和统一性标准； ③：电子政务管理体制改革远未到位； ④：电子政务整体应用水平还较低； ⑤：政府公务员的素质有待提高； ⑥：电子政务立法滞后； ⑦：对电子政务安全问题缺乏正确认识； 8.政府创新的含义和内容？ 含义：是指各级政府为适应公共管理与行政环境的需要，与时俱进的转变观念与职能，探索新的行政方法与途径，形成新的组织结
土木工程外文文献及翻译
本科毕业设计 外文文献及译文 文献、资料题目：Designing Against Fire Of Building 文献、资料来源：国道数据库 文献、资料发表（出版）日期：2008.3.25 院（部）：土木工程学院 专业：土木工程 班级：土木辅修091 姓名：武建伟 学号：2008121008 指导教师：周学军、李相云 翻译日期： 20012.6.1
外文文献: Designing Against Fire Of Buliding John Lynch ABSTRACT: This paper considers the design of buildings for fire safety. It is found that fire and the associ- ated effects on buildings is significantly different to other forms of loading such as gravity live loads, wind and earthquakes and their respective effects on the building structure. Fire events are derived from the human activities within buildings or from the malfunction of mechanical and electrical equipment provided within buildings to achieve a serviceable environment. It is therefore possible to directly influence the rate of fire starts within buildings by changing human behaviour, improved maintenance and improved design of mechanical and electrical systems. Furthermore, should a fire develops, it is possible to directly influence the resulting fire severity by the incorporation of fire safety systems such as sprinklers and to provide measures within the building to enable safer egress from the building. The ability to influence the rate of fire starts and the resulting fire severity is unique to the consideration of fire within buildings since other loads such as wind and earthquakes are directly a function of nature. The possible approaches for designing a building for fire safety are presented using an example of a multi-storey building constructed over a railway line. The design of both the transfer structure supporting the building over the railway and the levels above the transfer structure are considered in the context of current regulatory requirements. The principles and assumptions associ- ated with various approaches are discussed. 1 INTRODUCTION Other papers presented in this series consider the design of buildings for gravity loads, wind and earthquakes.The design of buildings against such load effects is to a large extent covered by engineering based standards referenced by the building regulations. This is not the case, to nearly the same extent, in the
土木工程外文文献翻译
专业资料 学院： 专业：土木工程 姓名： 学号： 外文出处：Structural Systems to resist (用外文写) Lateral loads 附件：1.外文资料翻译译文；2.外文原文。
附件1：外文资料翻译译文 抗侧向荷载的结构体系 常用的结构体系 若已测出荷载量达数千万磅重，那么在高层建筑设计中就没有多少可以进行极其复杂的构思余地了。确实，较好的高层建筑普遍具有构思简单、表现明晰的特点。 这并不是说没有进行宏观构思的余地。实际上，正是因为有了这种宏观的构思，新奇的高层建筑体系才得以发展，可能更重要的是：几年以前才出现的一些新概念在今天的技术中已经变得平常了。 如果忽略一些与建筑材料密切相关的概念不谈，高层建筑里最为常用的结构体系便可分为如下几类： 1.抗弯矩框架。 2.支撑框架，包括偏心支撑框架。 3.剪力墙，包括钢板剪力墙。 4.筒中框架。 5.筒中筒结构。 6.核心交互结构。 7. 框格体系或束筒体系。 特别是由于最近趋向于更复杂的建筑形式，同时也需要增加刚度以抵抗几力和地震力，大多数高层建筑都具有由框架、支撑构架、剪力墙和相关体系相结合而构成的体系。而且，就较高的建筑物而言，大多数都是由交互式构件组成三维陈列。 将这些构件结合起来的方法正是高层建筑设计方法的本质。其结合方式需要在考虑环境、功能和费用后再发展，以便提供促使建筑发展达到新高度的有效结构。这并
不是说富于想象力的结构设计就能够创造出伟大建筑。正相反，有许多例优美的建筑仅得到结构工程师适当的支持就被创造出来了，然而，如果没有天赋甚厚的建筑师的创造力的指导，那么，得以发展的就只能是好的结构，并非是伟大的建筑。无论如何，要想创造出高层建筑真正非凡的设计，两者都需要最好的。 虽然在文献中通常可以见到有关这七种体系的全面性讨论，但是在这里还值得进一步讨论。设计方法的本质贯穿于整个讨论。设计方法的本质贯穿于整个讨论中。 抗弯矩框架 抗弯矩框架也许是低，中高度的建筑中常用的体系，它具有线性水平构件和垂直构件在接头处基本刚接之特点。这种框架用作独立的体系，或者和其他体系结合起来使用，以便提供所需要水平荷载抵抗力。对于较高的高层建筑，可能会发现该本系不宜作为独立体系，这是因为在侧向力的作用下难以调动足够的刚度。 我们可以利用STRESS，STRUDL 或者其他大量合适的计算机程序进行结构分析。所谓的门架法分析或悬臂法分析在当今的技术中无一席之地，由于柱梁节点固有柔性，并且由于初步设计应该力求突出体系的弱点，所以在初析中使用框架的中心距尺寸设计是司空惯的。当然，在设计的后期阶段，实际地评价结点的变形很有必要。 支撑框架 支撑框架实际上刚度比抗弯矩框架强，在高层建筑中也得到更广泛的应用。这种体系以其结点处铰接或则接的线性水平构件、垂直构件和斜撑构件而具特色，它通常与其他体系共同用于较高的建筑，并且作为一种独立的体系用在低、中高度的建筑中。
中英文文献翻译
毕业设计（论文）外文参考文献及译文 英文题目Component-based Safety Computer of Railway Signal Interlocking System 中文题目模块化安全铁路信号计算机联锁系统 学院自动化与电气工程学院 专业自动控制 姓名葛彦宁 学号 200808746 指导教师贺清 2012年5月30日
Component-based Safety Computer of Railway Signal Interlocking System 1 Introduction Signal Interlocking System is the critical equipment which can guarantee traffic safety and enhance operational efficiency in railway transportation. For a long time, the core control computer adopts in interlocking system is the special customized high-grade safety computer, for example, the SIMIS of Siemens, the EI32 of Nippon Signal, and so on. Along with the rapid development of electronic technology, the customized safety computer is facing severe challenges, for instance, the high development costs, poor usability, weak expansibility and slow technology update. To overcome the flaws of the high-grade special customized computer, the U.S. Department of Defense has put forward the concept：we should adopt commercial standards to replace military norms and standards for meeting consumers’demand [1]. In the meantime, there are several explorations and practices about adopting open system architecture in avionics. The United Stated and Europe have do much research about utilizing cost-effective fault-tolerant computer to replace the dedicated computer in aerospace and other safety-critical fields. In recent years, it is gradually becoming a new trend that the utilization of standardized components in aerospace, industry, transportation and other safety-critical fields. 2 Railways signal interlocking system 2.1 Functions of signal interlocking system The basic function of signal interlocking system is to protect train safety by controlling signal equipments, such as switch points, signals and track units in a station, and it handles routes via a certain interlocking regulation. Since the birth of the railway transportation, signal interlocking system has gone through manual signal, mechanical signal, relay-based interlocking, and the modern computer-based Interlocking System. 2.2 Architecture of signal interlocking system Generally, the Interlocking System has a hierarchical structure. According to the function of equipments, the system can be divided to the function of equipments; the system
外文文献翻译——参考格式
广东工业大学华立学院 本科毕业设计（论文） 外文参考文献译文及原文 系部经济学部 专业经济学 年级 2007级 班级名称 07经济学6班 学号 16020706001 学生姓名张瑜琴 指导教师陈锶 2011 年05月
目录 1挑战：小额贷款中的进入和商业银行的长期承诺 (1) 2什么商业银行带给小额贷款和什么把他们留在外 (2) 3 商业银行的四个模型进入小额贷款之内 (4) 3.1内在的单位 (4) 3.2财务子公司 (5) 3.3策略的同盟 (5) 3.4服务公司模型 (6) 4 合法的形式和操作的结构比较 (8) 5 服务的个案研究公司模型：厄瓜多尔和Haiti5 (9)
1 挑战：小额贷款中的进入和商业银行的长期承诺 商业银行已经是逐渐重要的运动员在拉丁美洲中的小额贷款服务的发展2到小额贷款市场是小额贷款的好消息客户因为银行能提供他们一完整类型的财务的服务，包括信用，储蓄和以费用为基础的服务。整体而言，它也对小额贷款重要，因为与他们广泛的身体、财务的和人类。如果商业银行变成重的运动员在小额贷款，他们能提供非常强烈的竞争到传统的小额贷款机构。资源，银行能廉宜地发射而且扩张小额贷款服务rela tively。如果商业广告银行在小额贷款中成为严重的运动员，他们能提出非常强烈的竞争给传统的小额贷款机构。然而，小额贷款社区里面有知觉哪一商业银行进入进入小额贷款将会是短命或浅的。举例来说，有知觉哪一商业银行首先可能不搬进小额贷款因为时候建立小额贷款操作到一个有利润的水平超过银行的标准投资时间地平线。或，在进入小额贷款，银行之后可能移动在－上面藉由增加贷款数量销售取利润最大值－或者更坏的事，退出如果他们是不满意与小额贷款的收益性的水平。这些知觉已经被特性加燃料商业银行的情形进入小额贷款和后来的出口之内。在最极端的，一些开业者已经甚至宣布，”降低尺度死！”而且抛弃了与主意合作的商业银行。 在最 signific 看得到的地方，蚂蚁利益商业银行可能带给小额贷款，国际的ACCION 发展发射而且扩张的和一些商业银行的关系小额贷款操作。在这些情形的大部分方面， ACCION 和它的合伙人正在使用方法，已知的当做服务公司模型，表演早答应当做一个能工作的方法克服真正的。 商业银行的障碍进入和穿越建立长命的小额贷款操作一个商业银行 这论文描述如何服务公司模型、住址商业银行中的主要议题进入进小额贷款，监定成功建立的因素动作井小额贷款服务公司，和礼物结果和小额贷款的课servic e 公司用最长的经验，在海地和审判官席 del 的 SOGEBANK│ SOGESOL 初期结果指出那这服务公司模型表现一重要的突破在促成商业银行进入和留在小额贷款。在厄瓜多尔的 Pichincha│ CREDIFE。初期结果指出服务公司模型在促成商业广告中表现一次重要的突破银行进入而且留在小额贷款。
土木工程专业外文文献及翻译
（ 二 〇 一 二 年 六 月 外文文献及翻译 题 目： About Buiding on the Structure Design 学生姓名： 学 院：土木工程学院 系 别：建筑工程系 专 业：土木工程(建筑工程方向) 班 级：土木08-4班 指导教师：
英文原文： Building construction concrete crack of prevention and processing Abstract The crack problem of concrete is a widespread existence but again difficult in solve of engineering actual problem, this text carried on a study analysis to a little bit familiar crack problem in the concrete engineering, and aim at concrete the circumstance put forward some prevention, processing measure. Keyword:Concrete crack prevention processing Foreword Concrete's ising 1 kind is anticipate by the freestone bone, cement, water and other mixture but formation of the in addition material of quality brittleness not and all material.Because the concrete construction transform with oneself, control etc. a series problem, harden model of in the concrete existence numerous tiny hole, spirit cave and tiny crack, is exactly because these beginning start blemish of existence just make the concrete present one some not and all the characteristic of quality.The tiny crack is a kind of harmless crack and accept concrete heavy, defend Shen and a little bit other use function not a creation to endanger.But after the concrete be subjected to lotus carry, difference in temperature etc. function, tiny crack would continuously of expand with connect, end formation we can see without the
仪表板外文文献翻译、中英文翻译、外文翻译
Dashboard From Wikipedia, the free encyclopedia This article is about a control panel placed in the front of the car. For other uses, see Dashboard (disambiguation). The dashboard of a Bentley Continental GTC car A dashboard (also called dash, instrument panel (IP), or fascia) is a control panel located directly ahead of a vehicle's driver, displaying instrumentation and controls for the vehicle's operation. Contents 1.Etymology 2.Dashboard features 3.Padding and safety 4.Fashion in instrumentation 5.See also 6.References Etymology Horse-drawn carriage dashboard Originally, the word dashboard applied to a barrier of wood or leather fixed at the front of a horse-drawn carriage or sleigh to protect the driver from mud or other debris "dashed up" (thrown up) by the horses' hooves.[1] Commonly these boards did not perform any additional function other than providing a convenient handhold for ascending into the driver's seat, or a small clip with which to secure the reins when not in use. When the first "horseless carriages" were constructed in the late 19th century, with engines mounted beneath the driver such as the Daimler Stahlradwagen, the simple dashboard was retained to protect occupants from debris thrown up by the cars' front wheels. However, as car design evolved to position the motor in front of the driver, the dashboard became a panel that protected vehicle occupants from the heat and oil of the engine. With gradually increasing mechanical complexity, this panel formed a convenient location for the placement of gauges and minor controls, and from this evolved the modern instrument panel,
英文文献及中文翻译撰写格式
关于毕业设计说明书（论文）英文文献及中文翻译撰写格式 为提高我校毕业生毕业设计说明书（毕业论文）的撰写质量，做到毕业设计说明书（毕业论文）在内容和格式上的统一和规范，特规定如下: 一、装订顺序 论文（设计说明书）英文文献及中文翻译内容一般应由3个部分组成，严格按以下顺序装订。 1、封面 2、中文翻译 3、英文文献（原文） 二、书写格式要求 1、毕业设计（论文）英文文献及中文翻译分毕业设计说明书英文文献及中文翻译和毕业论文英文文献及中文翻译两种，所有出现相关字样之处请根据具体情况选择“毕业设计说明书” 或“毕业论文”字样。 2、毕业设计说明书（毕业论文）英文文献及中文翻译中的中文翻译用Word 软件编辑，英文文献用原文，一律打印在A4幅面白纸上，单面打印。 3、毕业设计说明书（毕业论文）英文文献及中文翻译的上边距:30mm；下边距:25mm；左边距:3Omm；右边距:2Omm；行间距1.5倍行距。 4、中文翻译页眉的文字为“中北大学2019届毕业设计说明书” 或“中北大学××××届毕业论文”，用小四号黑体字，页眉线的上边距为25mm；页脚的下边距为18mm。 5、中文翻译正文用小四号宋体，每章的大标题用小三号黑体，加粗，留出上下间距为：段前0.5行，段后0.5行；二级标题用小四号黑体，加粗；其余小标题用小四号黑体，不加粗。 6、文中的图、表、附注、公式一律采用阿拉伯数字分章编号。如图1.2，表2.3，附注3.2或式4.3。 7、图表应认真设计和绘制,不得徒手勾画。表格与插图中的文字一律用5号宋体。
每一插图和表格应有明确简短的图表名，图名置于图之下，表名置于表之上，图表号与图表名之间空一格。插图和表格应安排在正文中第一次提及该图表的文字的下方。当插图或表格不能安排在该页时，应安排在该页的下一页。 图表居中放置，表尽量采用三线表。每个表应尽量放在一页内，如有困难，要加“续表X.X”字样，并有标题栏。 图、表中若有附注时，附注各项的序号一律用阿拉伯数字加圆括号顺序排，如:注①。附注写在图、表的下方。 文中公式的编号用圆括号括起写在右边行末顶格，其间不加虚线。 8、文中所用的物理量和单位及符号一律采用国家标准，可参见国家标准《量和单位》(GB3100~3102-93)。 9、文中章节编号可参照《中华人民共和国国家标准文献著录总则》。
土木工程类专业英文文献及翻译
PA VEMENT PROBLEMS CAUSED BY COLLAPSIBLE SUBGRADES By Sandra L. Houston,1 Associate Member, ASCE (Reviewed by the Highway Division) ABSTRACT: Problem subgrade materials consisting of collapsible soils are com- mon in arid environments, which have climatic conditions and depositional and weathering processes favorable to their formation. Included herein is a discussion of predictive techniques that use commonly available laboratory equipment and testing methods for obtaining reliable estimates of the volume change for these problem soils. A method for predicting relevant stresses and corresponding collapse strains for typical pavement subgrades is presented. Relatively simple methods of evaluating potential volume change, based on results of familiar laboratory tests, are used. INTRODUCTION When a soil is given free access to water, it may decrease in volume, increase in volume, or do nothing. A soil that increases in volume is called a swelling or expansive soil, and a soil that decreases in volume is called a collapsible soil. The amount of volume change that occurs depends on the soil type and structure, the initial soil density, the imposed stress state, and the degree and extent of wetting. Subgrade materials comprised of soils that change volume upon wetting have caused distress to highways since the be- ginning of the professional practice and have cost many millions of dollars in roadway repairs. The prediction of the volume changes that may occur in the field is the first step in making an economic decision for dealing with these problem subgrade materials. Each project will have different design considerations, economic con- straints, and risk factors that will have to be taken into account. However, with a reliable method for making volume change predictions, the best design relative to the subgrade soils becomes a matter of economic comparison, and a much more rational design approach may be made. For example, typical techniques for dealing with expansive clays include: (1) In situ treatments with substances such as lime, cement, or fly-ash; (2) seepage barriers and/ or drainage systems; or (3) a computing of the serviceability loss and a mod- ification of the design to "accept" the anticipated expansion. In order to make the most economical decision, the amount of volume change (especially non- uniform volume change) must be accurately estimated, and the degree of road roughness evaluated from these data. Similarly, alternative design techniques are available for any roadway problem. The emphasis here will be placed on presenting economical and simple methods for: (1) Determining whether the subgrade materials are collapsible; and (2) estimating the amount of volume change that is likely to occur in the 'Asst. Prof., Ctr. for Advanced Res. in Transp., Arizona State Univ., Tempe, AZ 85287. Note. Discussion open until April 1, 1989. To extend the closing date one month,