Distributor: Electro-Stock https://www.wendangku.net/doc/c09042205.html, Tel: 630-682-1542 Fax: 630-682-1562
FEATURES:
? Large switching capacity up to 80A ? Small size and light weight
? PCB pin and quick connect mounting available ? Suitable for automobile and lamp accessories
? QS-9000, ISO-9002 Certified Manufacturing
28.5 x 28.5 x 26.5 (40.0) mm
CONTACT DATA
Contact Arrangement
1A = SPST N.O. 1B = SPST N.C. 1C = SPDT
1U = SPST N.O. (2 terminals) Contact Configuration Standard
Heavy Duty Contact Rating
1A 1B 1C 1U 60A @ 14VDC 40A @ 14VDC 60A @ 14VDC N.O. 40A @ 14VDC N.C. 2x25A @ 14VDC
80A @ 14VDC 70A @ 14VDC 80A @ 14VDC N.O. 70A @ 14VDC N.C. 2x25A @ 14VDC
Contact Resistance < 30 milliohms initial Contact Material
AgSnO 2In 2O 3 Maximum Switching Power 980W Maximum Switching Voltage 75VDC Maximum Switching Current 80A
COIL DATA
Coil Voltage
VDC
Coil Resistance
? ± 10%
Rated Max.
1.8W Pick Up Voltage VDC (max)
75%
of rated voltage
Release Voltage VDC (min)
10%
of rated voltage
Coil Power
W
Operate Time
ms
Release Time
ms
6 7.8 20 4.2 0.6 12 15.6 80 8.4 1.2 24 31.2
320
16.8 2.4
1.8 7 5
CAUTION:
1. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay.
2. Pickup and release voltages are for test purposes only and are not to be used as design criteria.
GENERAL DATA
Electrical Life @ rated load Mechanical Life 100K cycles, typical 10M cycles, typical Insulation Resistance 100M ? min @ 500VDC Dielectric Strength, Coil to Contact Contact to Contact 500V rms min. @ sea level 500V rms min. @ sea level Shock Resistance 147m/s 2 for 11ms Vibration Resistance 1.5mm double amplitude 10-40Hz Terminal (Copper Alloy) Strength 8N (Quick Connect), 4N (PCB Pins) Operating Temperature Storage Temperature -40 °C to + 85 °C -40 °C to + 155 °C Solderability 230 °C ± 2 °C for 10 ± 0.5s
Weight 46g
Distributor: Electro-Stock https://www.wendangku.net/doc/c09042205.html, Tel: 630-682-1542 Fax: 630-682-1562
ORDERING INFORMATION
1. Series:
24VDC
CTA3 standard
CTA3F with mounting flange
CTA3M with metal bracket CTA3F 2.Contact Arrangement: 1A = SPST N.O. 1B = SPST N.C. 1C = SPDT
1U = SPST N.O. **Only available with standard contacts 1C
3. Sealing Options: S = Sealed C = Dust Cover
S 4. Termination Options: P = PCB Pins
Q = Quick Connect P 5. Coil Voltage: 6VDC 12VDC 24VDC
2 6. Contacts: 1 = Standard 2 = Heavy Duty 7: Coil Suppression: Blank = Standard
D = Diode (1N4005) Cathode on “86” terminal R = Resistor (680 Ohms) 2D = 2 diodes (1N4005)
DR = Diode & Resistor (1N4005 & 680 Ohms) Cathode on “86” terminal ** Consult factory if other values are needed.
DIMENSIONS – CTA3 (Units = mm)
Standard contacts (1) with PC Pins
Standard contacts (1) with Quick Connects
Heavy duty contacts (2) with PC Pins
Heavy duty contacts (2) with Quick Connects
Distributor: Electro-Stock https://www.wendangku.net/doc/c09042205.html, Tel: 630-682-1542 Fax: 630-682-1562
DIMENSIONS – CTA3F (Units = mm)
Standard contacts (1) with Quick Connects Heavy duty contacts (2) with Quick Connects DIMENSIONS – CTA3M (Units = mm)
Standard contacts (1) with Quick Connects Heavy duty contacts (2) with Quick Connects SCHEMATICS, PC PIN DIMENSIONS, & PC LAYOUTS (BOTTOM VIEWS)
1A 1B
1C 1U