POST后处理器程序
# Welcome to the text version of the post!
# You have just exported the post formats to a text file, where you can edit them.
# When you save and exit this editor, the post formats will be imported into XBUILD
# and will overwrite the post that is currently loaded in XBUILD.
# Please make sure you save your post when you return to XBUILD.
# Note: If you remove any of the formats from this text file, then the format will be cleared when reimported into XBUILD.
# To use a different editor add the path of the executable to the 'XBUILDEXTEDIT' environment variable. For details, consult XBUILD help.
##### BEGIN PROGRAM START FORMAT #####
##### END PROGRAM START FORMAT #####
##### BEGIN TOOL CHANGE FORMAT #####
##### END TOOL CHANGE FORMAT #####
##### BEGIN SEGMENT START FORMAT #####
##### END SEGMENT START FORMAT #####
##### BEGIN PROGRAM END FORMAT #####
{N
{N
{N
{N
{N
{N
<10><13>
{N
{N
{N
##### END PROGRAM END FORMAT #####
##### BEGIN RAPID MOVE FORMAT #####
{N
##### END RAPID MOVE FORMAT #####
##### BEGIN LINEAR MOVE FORMAT #####
{N
{X
##### END LINEAR MOVE FORMAT #####
##### BEGIN CIRCULAR MOVE FORMAT #####
{N
{N
{N
##### END CIRCULAR MOVE FORMAT #####
##### BEGIN OPEN MACRO FORMAT #####
O
{N
{N
##### END OPEN MACRO FORMAT #####
##### BEGIN CLOSE MACRO FORMAT #####
{N
{N
##### END CLOSE MACRO FORMAT #####
##### BEGIN MACRO CALL FORMAT #####
{N
##### END MACRO CALL FORMAT #####
##### BEGIN IN_MACRO LINEAR MOVE FORMAT #####
{N
{X<@X-COORD>}{Y<@Y-COORD>}{Z<@Z-COORD>}{F
##### END IN_MACRO LINEAR MOVE FORMAT #####
##### BEGIN IN_MACRO CIRCULAR MOVE FORMAT #####
{N
{N
{N
OORD>Y<@Y-COORD>{Z<@Z-COORD>}K
##### END IN_MACRO CIRCULAR MOVE FORMAT #####
##### BEGIN DRILL CYCLE FORMAT #####
{N
##### END DRILL CYCLE FORMAT #####
##### BEGIN SPOT FACE CYCLE FORMAT #####
{N
##### END SPOT FACE CYCLE FORMAT #####
##### BEGIN DEEP HOLE CYCLE FORMAT #####
{N
##### END DEEP HOLE CYCLE FORMAT #####
##### BEGIN TAP CYCLE FORMAT #####
{N
##### END TAP CYCLE FORMAT #####
##### BEGIN BORE (F-F) CYCLE FORMAT #####
{N
##### END BORE (F-F) CYCLE FORMAT #####
##### BEGIN CHIP BREAK CYCLE FORMAT #####
{N
##### END CHIP BREAK CYCLE FORMAT #####
##### BEGIN BORE (F-D-F) CYCLE FORMAT #####
{N
##### END BORE (F-D-F) CYCLE FORMAT #####
##### BEGIN CANNED MOVE FORMAT #####
{N
##### END CANNED MOVE FORMAT #####
##### BEGIN CYCLE CANCEL FORMAT #####
{N
{N
##### END CYCLE CANCEL FORMAT #####
##### BEGIN THREAD CYCLE FORMAT #####
##### END THREAD CYCLE FORMAT #####
##### BEGIN Z RAPID MOVE FORMAT #####
{N
##### END Z RAPID MOVE FORMAT #####
##### BEGIN FILE END FORMAT #####
%
##### END FILE END FORMAT #####
##### BEGIN GROOVE SIMPLE/COMPUTED FORMAT #####
##### END GROOVE SIMPLE/COMPUTED FORMAT #####
##### BEGIN CATCHER IN FORMAT #####
##### END CATCHER IN FORMAT #####
##### BEGIN CATCHER OUT FORMAT #####
##### END CATCHER OUT FORMAT #####
##### BEGIN ROUGH CYCLE START FORMAT #####
##### END ROUGH CYCLE START FORMAT #####
##### BEGIN ROUGH CYCLE END FORMAT #####
##### END ROUGH CYCLE END FORMAT #####
##### BEGIN FINISH CYCLE START FORMAT #####
##### END FINISH CYCLE START FORMAT #####
##### BEGIN FINISH CYCLE END FORMAT #####
##### END FINISH CYCLE END FORMAT #####
##### BEGIN GROOVE PATH START FORMAT #####
##### END GROOVE PATH START FORMAT #####
##### BEGIN GROOVE PATH END FORMAT #####
##### END GROOVE PATH END FORMAT #####
##### BEGIN BORE (F-S-R) CYCLE FORMAT #####
{N
##### END BORE (F-S-R) CYCLE FORMAT #####
##### BEGIN BORE (No Drag) CYCLE FORMAT #####
{N
##### END BORE (No Drag) CYCLE FORMAT #####
##### BEGIN BAR FEED FORMAT #####
#
#### END BAR FEED FORMAT #####
##### BEGIN SPINDLE FORMAT #####
##### END SPINDLE FORMAT #####
##### BEGIN DWELL FORMAT #####
##### END DWELL FORMAT #####
##### BEGIN SPINDLE CHANGE FORMAT #####
##### END SPINDLE CHANGE FORMAT #####
##### BEGIN JAWS OPEN FORMAT #####
##### END JAWS OPEN FORMAT #####
##### BEGIN JAWS CLOSE FORMAT #####
##### END JAWS CLOSE FORMAT #####
##### BEGIN SUB-SPINDLE POS FORMAT #####
##### END SUB-SPINDLE POS FORMAT #####
##### BEGIN SUB-SPINDLE FEED POS FORMAT #####
##### END SUB-SPINDLE FEED POS FORMAT #####
##### BEGIN SUB-SPINDLE ANGLE FORMAT #####
##### END SUB-SPINDLE ANGLE FORMAT #####
##### BEGIN SUB-SPINDLE SPIN FORMAT #####
##### END SUB-SPINDLE SPIN FORMAT #####
##### BEGIN UDF_TEXT FORMAT #####
##### END UDF_TEXT FORMAT #####
##### BEGIN PROGRAM STOP FORMAT #####
##### END PROGRAM STOP FORMAT #####
##### BEGIN TURRET HOME FORMAT #####
##### END TURRET HOME FORMAT #####
##### BEGIN SUB-SPINDLE SYNCHRONIZE FORMAT #####
##### END SUB-SPINDLE SYNCHRONIZE FORMAT #####
##### BEGIN TURRET INDEX FORMAT #####
##### END TURRET INDEX FORMAT #####
##### BEGIN AIR BLAST FORMAT #####
##### END AIR BLAST FORMAT #####
##### BEGIN EMPTY FORMAT FORMAT #####
##### END EMPTY FORMAT FORMAT #####
##### BEGIN HOLE MILLING CYCLE FORMAT #####
##### END HOLE MILLING CYCLE FORMAT #####
##### BEGIN BACK BORE CYCLE FORMAT #####
##### END BACK BORE CYCLE FORMAT #####
##### BEGIN REVERSE TAP CYCLE FORMAT #####
##### END REVERSE TAP CYCLE FORMAT #####
##### BEGIN BORE (F-D-S-J) CYCLE FORMAT #####
##### END BORE (F-D-S-J) CYCLE FORMAT #####
##### BEGIN SLUG TRANSFER FORMAT #####
##### END SLUG TRANSFER FORMAT #####
##### BEGIN REVERSE SLUG TRANSFER FORMAT #####
##### END REVERSE SLUG TRANSFER FORMAT #####
##### BEGIN PRE CUTOFF FORMAT #####
##### END PRE CUTOFF FORMAT #####
##### BEGIN POST CUTOFF FORMAT #####
##### END POST CUTOFF FORMAT #####
##### BEGIN BAR PULL FORMAT #####
##### END BAR PULL FORMAT #####
##### BEGIN SUPPORT ON FORMAT #####
##### END SUPPORT ON FORMAT #####
##### BEGIN SUPPORT OFF FORMAT #####
##### END SUPPORT OFF FORMAT #####