MPS6724, MPS6725
One Watt Darlington Transistors
NPN Silicon
Features
?Pb?Free Packages are Available*
MAXIMUM RATINGS
Rating Symbol Value Unit
Collector?Emitter Voltage
MPS6724
MPS6725V CEO
40
50
Vdc
Collector?Base Voltage
MPS6724
MPS6725V CBO
50
60
Vdc
Emitter?Base Voltage V EBO12Vdc Collector Current ? Continuous I C1000mAdc
Total Device Dissipation @ T A = 25°C Derate above 25°C P D 1.0
8.0
W
mW/°C
Total Device Dissipation @ T C = 25°C Derate above 25°C
P D 2.5
20
W
mW/°C
Operating and Storage Junction Temperature Range T J, T stg
?55 to +150°C
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit Thermal Resistance, Junction?to?Ambient R q JA125°C/W Thermal Resistance, Junction?to?Case R q JC50°C/W Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected.
*For additional information on our Pb?Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
https://www.wendangku.net/doc/cb14785732.html,
COLLECTOR 3
See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet.
ORDERING INFORMATION
ELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Max
Unit
OFF CHARACTERISTICS
Collector ?Emitter Breakdown Voltage (Note 1)
(I C = 1.0 mAdc, I B = 0)MPS6724MPS6725V (BR)CES
4050??
Vdc
Collector ?Base Breakdown Voltage
(I C = 1.0 m Adc, I E = 0)MPS6724MPS6725
V (BR)CBO
5060??Vdc
Emitter ?Base Breakdown Voltage
(I E = 10 m Adc, I C = 0)V (BR)EBO 12
?
Vdc Collector Cutoff Current
(V CB = 30 Vdc, I E = 0)MPS6724(V CB = 40 Vdc, I E = 0)MPS6725I CBO
??100100nAdc
Emitter Cutoff Current
(V EB = 10 Vdc, I C = 0)I EBO
?
100
nAdc
ON CHARACTERISTICS (Note 1)DC Current Gain
(I C = 200 mAdc, V CE = 5.0 Vdc)(I C = 1000 mAdc, V CE = 5.0 Vdc)h FE
25,0004,000?40,000?
Collector ?Emitter Saturation Voltage
(I C = 1000 mAdc, I B = 2.0 mAdc)V CE(sat)? 1.5Vdc Base ?Emitter On Voltage
(I C = 1000 mAdc, V CE = 5.0 Vdc)V BE(on)
?
2.0
Vdc
SMALL?SIGNAL CHARACTERISTICS
Current?Gain ? Bandwidth Product
(I C = 200 mAdc, V CE = 5.0 Vdc, f = 100 MHz)f T 1001000MHz Collector?Base Capacitance
(V CB = 10 Vdc, I E = 0, f = 1.0 MHz)
C cb
?
10
pF
1.Pulse Test: Pulse Width v 300 m s; Duty Cycle v
2.0%.
TYPICAL CHARACTERISTICS
1.5
V CE , COLLECTOR?EMITTER VOLTAGE (VOLTS)
3.0 k 2.0 k
1.0 k
500
20020I C , C O L L E C T O R C U R R E N T (m A )
2.0 5.030
10Figure 1. Active Region — Safe Operating Area
5005.0I C , COLLECTOR CURRENT (mA)200 k 100 k 70 k I B , BASE CURRENT (m A)
2.01.00.5h F E , D C C U R R E N T G A I N
, C O L L E C T O R E M I T T E R V O L T A G E (V O L T S )
50 k 20 k 3010
20100200 1.52.53.0V C E Figure 2. DC Current Gain Figure 3. Collector Saturation Region
7.0705030010 k 7.0 k 5.0 k
2.0 k
30 k 3.0 k
I C
, COLLECTOR CURRENT (mA)2.0
1.00.80.60.2
V R , REVERSE VOLTAGE (VOLTS)
, S M A L L ?S I G N A L C U R R E N T G A I N
h F E 4.0I C , COLLECTOR CURRENT (mA)0.6
1.6
1.41.21.00.8I C , COLLECTOR CURRENT (mA)
?1.0?2.0?3.0?4.0?5.0?6.0
V , V O L T A G E (V O L T S )
q °, T E M P E R A T U R E C O E F F I C I E N T S (m V / C )
V Figure 4. “ON” Voltages Figure 5. Temperature Coefficients
Figure 6. High Frequency Current Gain Figure 7. Capacitance
0.4
ORDERING INFORMATION
Device Package Shipping?
MPS6724TO?92
5000 Units / Bulk
MPS6724G TO?92
(Pb?Free)
MPS6725TO?92
5000 Units / Bulk
MPS6725G TO?92
(Pb?Free)
MPS6724RLRA TO?92
2000 Units / Tape & Reel
MPS6724RLRAG TO?92
(Pb?Free)
MPS6725RLRP TO?92
2000 Units / Tape & Ammo Box
MPS6725RLRPG TO?92
(Pb?Free)
?For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
PACKAGE DIMENSIONS
TO?92 (TO?226)CASE 29?10ISSUE AL
NOTES:
1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 198
2.
2.CONTROLLING DIMENSION: INCH.
3.CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED.
4.DIMENSION F APPLIES BETWEEN P AND L.
DIMENSIONS D AND J APPLY BETWEEN L AND K MIMIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM.
DIM MIN MAX MIN MAX MILLIMETERS
INCHES A 0.1750.205 4.44 5.21B 0.2900.3107.377.87C 0.1250.165 3.18 4.19D 0.0180.0210.4570.533F 0.0160.0190.4070.482G 0.0450.055 1.15 1.39H 0.0950.105 2.42 2.66J 0.0180.0240.460.61K 0.500???12.70???L 0.250??? 6.35???N 0.0800.105 2.04 2.66P ???0.100??? 2.54R
0.135???
3.43???
STYLE 1:
PIN 1.EMITTER
2.BASE
3.COLLECTOR
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION