文档库 最新最全的文档下载
当前位置:文档库 › chelating sepharose fast flow 说明书

chelating sepharose fast flow 说明书

chelating sepharose fast flow 说明书
chelating sepharose fast flow 说明书

Chelating Sepharose Fast Flow

Instructions 71–5001–87 AE

Affinity chromatography

GE Healthcare

Immobilized metal ion affinity chromatography (IMAC) exploits a molecule’s affinity for chelated metal ions. The amino acid histidine present in many proteins forms complexes with transition metal ions such as Cu 2+, Zn 2+, Ni 2+ and Fe 3+. Chelating

Sepharose? Fast Flow with a suitable immobilized metal ion will therefore selectively retain proteins with exposed histidine. Exposed cysteine and tryptophane residues may also be involved in the binding to an immobilized metal ion but their contribution to the binding is much lower than the contribution from exposed histidine residues.The strength of binding is affected by the buffer pH and the metal ion selected.Chelating Sepharose Fast Flow consists of iminodiacetic acid groups coupled to Sepharose 6 Fast Flow by stable ether linkages via a 7-atom spacer.Chelating Sepharose Fast Flow belongs to the BioProcess? Media family.

BioProcess media are developed and supported for production scale

chromatography. All BioProcess media are produced with validated methods and are tested to meet manufacturing requirements. Secure ordering and delivery routines give a reliable supply of media for production scale. Regulatory Support Files (RSF) are available to assist process validation and submissions to regulatory authorities.

Tables of contents

1. Product description 3

2. Column packing 3

3. Evaluation of packing 6

4. Immobilized Metal Ion Affinity Chromatography (IMAC) 8

5. Choice of metal ions 11

6. Regeneration, Cleaning, Sanitization and Storage. 12

7. Ordering information 14 p. 2

1. Product description

Table 1. Medium characteristics

Total capacity: 30–37 μmol Cu2+/ml drained

medium

Bead structure: 6% highly cross-linked agarose

Bead size range: 45–165 μm

Mean particle size: approx. 90 μm

Linear flow velocity: >300 cm/h at 25 °C, 0.1 MPa (1 bar,

14.5 psi), XK50/30 column, 15 cm bed

height

Max. operating pressure: 0.3 MPa (3 bar, 42 psi)

pH stability*

Long term: 3–13

Short term: 2–14

Chemical stability: All commonly used aqueous

buffers, 0.01 M HCl, 1.0 M NaOH,

20% ethanol (tested at 40 °C for 7 days) Physical stability: Negligible volume variation due to

changes in pH or ionic strength Autoclavable: In 0.1 M sodium acetate at 121 °C

for 30 min

* The ranges given are estimates based on our knowledge and experience. Please note the following:

pH stability, long term refers to the pH interval where the medium is stable over a long period

of time without adverse effects on its subsequent chromatographic performance.

pH stability, short term refers to the pH interval for regeneration, cleaning-in-place and sanitization procedures.

2. Column packing

Chelating Sepharose Fast Flow is supplied pre-swollen in 20% ethanol. Prepare a slurry by decanting the 20% ethanol solution and replacing it with distilled water in a ratio of 75% settled medium to 25% distilled water.

p. 3

Table 2. Recommended lab-scale columns for Chelating Sepharose Fast Flow.

Packing flow rate (ml/min) Max. recommended flow rate) Empty Column* first step second step for chromatography (ml/min) Tricorn? 10/20 0.9 4.7 2

Tricorn 10/50 0.9 4.7 2

Tricorn 10/100 0.9 4.7 2

XK 16/20 2.5 8.7 5

XK 26/20 6.6 23 13

XK 50/20 24.5 85 49

XK 50/30 24.5 85 49

* For inner diameter and maximum bed volumes and bed heights, see Ordering information

Table 3. Recommended process-scale columns for Chelating Sepharose Fast Flow

Column Inner diam Bed volume Bed height

(mm) (L) (max (cm) BPG? 100/500 100 up to 2.0 L 26

BPG 140/500 140 up to 4.0 L 26

BPG 200/500 200 up to 8.2 L 26

BPG 300/500 300 up to 18.0 L 26

BPG 450/500 450 up to 36.0 L 23

Chromaflow? 400/100-300 400 13–37 L 30

Chromaflow 600/100-300 600 28–85 L 30

p. 4

Packing lab-scale columns

1. Assemble the column (and packing reservoir if necessary).

2. Remove air from the end-piece and adapter by flushing with water. Make

sure no air has been trapped under the column bed support. Close the

column outlet leaving the bed support covered with water.

3. Resuspend the medium and pour the slurry into the column in a single

continuous motion. Pouring the slurry down a glass rod held against the column wall will minimize the introduction of air bubbles.

4. If using a packing reservoir, immediately fill the remainder of the

column and reservoir with water. Mount the adapter or lid of the packing reservoir and connect the column to a pump. Avoid trapping air bubbles under the adapter or in the inlet tubing.

5. Open the bottom outlet of the column and set the pump to run at the

desired flow rate. Ideally, Sepharose 6 Fast Flow media are packed in XK or Tricorn columns in a two-step procedure: Do not exceed 0.5 bar (0.05 MPa) in the first step and 1.5 bar (0.15 MPa) in the second step.

If the packing equipment does not include a pressure gauge, use a

packing flow rate of 2.5 ml/min (XK 16/20 column) or 0.9 ml/min (Tricorn 10/100 column) in the first step, and 8.7 ml/min (XK 16/20 column) or

4.7 ml/min (Tricorn 10/100 column) in the second step. See Table 3 for

packing flow rates for other columns.

If the recommended pressure or flow rate cannot be obtained, use

the maximum flow rate your pump can deliver. This should also give a

wellpacked bed.

Note:For subsequent chromatography procedures, do not exceed 75% of the packing flow rate. See Table 3 for flow rates for

chromatography.

6. Maintain packing flow rate for at least 3 bed volumes after a constant

bed height is reached. Mark the bed height on the column.

7. Stop the pump and close the column outlet.

8. If using a packing reservoir, disconnect the reservoir and fit the adapter

to the column.

p. 5

p. 6

9. With the adapter inlet disconnected, push the adapter down into the

column until it reaches the mark. Allow the packing solution to flush the adapter inlet. Lock the adapter in position.10. Connect the column to a pump or a chromatography system and start

equilibration. Re-adjust the adapter if necessary.

Packing large scale columns

For general process-scale column packing instructions, please visit support section at https://www.wendangku.net/doc/ca16277193.html,/protein_purification

3. Evaluation of packing

To check the quality of the packing and to monitor this during the working life of the column, column efficiency should be tested directly after packing, prior to re-use, and when separation performance is seen to deteriorate.The best method of expressing the efficiency of a packed column is in terms of the height equivalent to a theoretical plate, HETP, and the asymmetry factor, A s . These values are easily determined by applying a sample such as 1% (v/v) acetone solution to the column. Sodium chloride can also be used as a test substance. Use a concentration of 2.0 M NaCl in water with 0.5 M NaCl in water as eluent.

The calculated plate number will vary depending on the test conditions and it should therefore be used as a reference value only. It is also

important that conditions and equipment are kept constant so that results are comparable. Changes in solute, solvent, eluent, sample volume, flow rate, liquid pathway, temperature etc., will influence the results.For optimal results, the sample volume should be at max. 2.5% of the column volume and the flow velocity between 15 and 30 cm/h.If an acceptance limit is defined in relation to column performance, the column plate number can be used as part of the acceptance criteria for column use.

p. 7

Method for measuring HETP and A s

To avoid dilution of the sample, apply it as close to the column inlet as possible.

Conditions Sample volume: 2.5% of the bed volume Sample conc.: 1.0% v/v acetone Flow velocity: 15 cm/h

UV:

280 nm, 1 cm, 0.1 AU

Calculate HETP and A s from the UV curve (or conductivity curve if NaCl is used as sample) as follows:

HETP = L/N

N = 5.54(V e /W h )2

where L = Bed height (cm)

N = number of theoretical plates V e = Peak elution distance

W h

= Peak width at half peak height

V e and W h are in the same units.

To facilitate comparison of column performance the concept of reduced plate height is often used.

The reduced plate height is calculated:

HETP/d

where d is the diameter of the bead. As a guideline, a value of <3 is normally acceptable.

The peak should be symmetrical, and the asymmetry factor as close as possible to 1 (values between 0.8–1.5 are usually acceptable). A change in the shape of the peak is usually the first indication of bed deterioration due to use.

Peak asymmetry factor calculation: A s = b/a where

a = 1st half peak width at 10% of peak height

b = 2nd half peak width at 10% of peak height.

p. 8

Figure 4 shows a UV trace for acetone in a typical test chromatogram in which the HETP and A s values are calculated.

Fig 4. UV trace for acetone in a typical test chromatogram showing the HETP and A s value calculations.

4 Immobilized Metal Ion Affinity

Chromatography (IMAC)

Charging the columns with metal ions

1. Prepare a 0.2 M solution of the desired metal ion (Cu 2+, Zn 2+, Ni 2+, Co 2+,

Fe 3+ etc.) in distilled water. Solutions of Zn 2+ ions should have a pH of approximately 5.5 or lower to avoid solubillity problems that arise at pH 6 or higher. Fe 3+ ions should be immobilized at low pH, approximately pH 3.0, to avoid formation of insoluble ferric compounds.2. Wash the column with at least 2 column volumes (CV) of distilled water.3. Apply approximately 0.2 CV of the metal ion solution to the column.4. Wash the column with at least 5 CV of distilled water to remove excess of

metal ions.

Column: BPG 300

Media: Sepharose 6 Fast Flow Bed height: 57.5 cm Bed volume: 40.6 litres Eluent: Distilled water

Sample: 1.05 litres (1% acetone)Flow rate: 19 cm/h Ve =18.7W = 0.9

HETP = 0.024 cm a: 0.90b: 0.85A : 0.941/2s

UV

5. Continue washing the column with at least 5 CV of an acidic

buffer [0.02 M sodium acetate, 0.5–1.0 M NaCl, pH 4.0] or until the

pH of the effluent is 4.0. This will elute loosely bound ions that might

otherwise leak out during adsorption/desorption phase of the actual

chromatographic step.

6. Equilibrate the column with at least 2 CV of the chosen binding

buffer (see recommedations below). The column is now ready for

chromatographic seperation of the sample components.

Note:In neutral aqueous solutions, Fe3+ ions are easily reduced to form insoluble compounds that can be hard to remove. Columns loaded

with Fe3+ should therefore not be left for a longer period of time in

neutral solutions. It is also advisable to strip off the immobilized Fe3+

ions after each run and recharge the column as required. Strongly

bound Fe3+ ions and ferric compounds can be removed by leaving

the medium in 0.05 M EDTA overnight.

Binding

The binding of target solute(s) from a complex biological sample onto an IMAC adsorbent charged with transition metal ions (Cu2+, Zn2+, Ni2+, Co2+)

is usually carried out in the pH interval of 5.5–8.5. The binding is often strongest at the upper end of this interval.

Care should be taken in preparing the sample for IMAC. The sample

should not contain chelating agents such as EDTA or citrate and higher concentrations of competing ions such as primary amines or imidazole/ histidine. It is advisable that the sample (and buffers used for the chromatographic step) contains 0.5–1.0 M of a neutral salt (NaCl, KCl, etc) to counteract possible ionic interactions.

The choice of binding buffer depends on the properties of the chelated metal ion and the binding characteristics of the solute. For immobilized transition metal ions, the following equilibration and binding buffers are recommeded:? 0.02–0.05 M Sodium phosphate buffer, containing 0.5–1.0 M NaCl, pH 6.8 or higher

? 0.05 M Tris-HCl, containing 0.5–1.0 M NaCl, pH 7.0 or higher.

p. 9

p. 10

The well-prepared sample is applied to the equilibrated column at a linear flow rate of 150 cm/h or higher. This is followed by washing out of unbound solutes with at least 5 CV of the equilibration buffer or until the A 280 of the effluent is at or near the base line. The bound solutes are then eluted as described below.

Note: 1. For screening experimets (and especially when the binding

characteristics of the target solute is unknown), it is advisable to use Cu 2+ ions immobilized to Chelating Sepharose Fast Flow since Cu 2+ ions have the broadest adsorbtion specificity for proteins and peptides (see also Choice of metal ions).

2. The presence of detergents in low concentration in the binding

buffers does not normally affect the adsorption of proteins.

3. A partial displacement of immobilized metal ions can sometimes

occur as the protein is bound to the adsorbent.

Elution

Elution of solutes bound to the column is achieved by one of three alternative procedures.

1. Reducing pH (linear or step-wise decrease in pH). Weakly bound proteins

are eluted already at pH 6.0 while strongly bound proteins are eluted successively when pH is lowered from 6.0–4.0 If the target protein is strongly bound, it is advisable to check its stability in an acidic milieu.The following buffers can be used:

Binding buffer: 0.02 M sodium phosphate, 0.5–1.0 M NaCl, pH 7.0Elution buffer: 0.02 M sodium phosphate (alternatively sodium acetate), 0.5–1.0 M NaCl, pH 4.0

2. Competitive elution (linear or step-wise increase in the concentration of

a competing ion, at constant pH). The most commonly used competing ions are: imidazole (0–0.05 M); histidine (0–0.05 M) or ammonium chloride (0–2 M). The following buffers can be used:Binding buffer: 0.02 M sodium phosphate, 0.5–1.0 M NaCl, pH 7.0

Elution buffer: 0.02 M sodium phosphate, 0.5–1.0 M NaCl, 1 M NH 4Cl (or 0.025 M imidazole), pH 7.0

3. Stripping of the immobilized metal ions. This procedure will strip the

metal ions from the medium and cause elution of bound proteins. This

procedure is not often recommended. It can also be used to wash out

denatured or precipitated protein. For this purpose, a 0.05 M solution of EDTA or EGTA, containing 0.5–1.0 M NaCl, (pH adjusted to 7.0), is used.

5 Choice of metal ions

When choosing the desired metal ion, consider the structural requirements underlying the basis of metal chelate-protein recognition.

Ni2+ is usually the the first choice metal ion when purifying most histidine-tagged recombinant proteins from cellular contaminants. The strength of binding between a protein and a metal ion is affected by several factors, including the length and position of the affinity tag on the protein, the type

of ion used, and the pH of buffers. Some histidine-tagged proteins might therefore be easier to purify with ions other than Ni2+, e.g. Zn2+ and Co2+.

In other cases, i.e. for non-tagged proteins, Cu2+ and Zn2+ metal ions are the most frequently used. Cu2+ ions bind strongly to a wide range of proteins

and some proteins will only bind to them. For screening experiments

(and especially when the binding characteristics of the target protein

is unknown), it is advisable to use Cu2+ ions immobilized to Chelating Sepharose Fast Flow. Zn2+ ions generally give a weaker binding and in some cases this can be exploited to achieve selective elution of a target protein. In some applications, Co2+, Fe3+ and Ca2+ have also been used.

Ni Sepharose 6 Fast Flow is an additional IMAC product offering from GE Healthcare and this product is pre-charged with nickel and is designed for purification of histidine-tagged proteins (see Ordering information)

p. 11

6. Regeneration, Cleaning, Sanitization and Storage.

Regenerating the medium

Before the medium is immobilized with a new metal ion, the medium must be stripped or regenerated. To ensure that the medium is totally free from metal ions wash with 0.5 column volumes of a 0.2 M solution of EDTA,

0.5 M NaCl. Remove residual EDTA by washing with 2–3 column volumes of 0.5 M NaCl.

Re-immobilization of the medium is performed according to the method previously described (see Charging the columns with metal ions).

Strongly bound ferric ions and ferric compounds can be removed by leaving the medium in 0.05 M EDTA overnight.

In some applications, substances such as denatured proteins or lipids do not elute in the regeneration procedures. These can be removed by cleaning-in-place procedures.

Cleaning-in-place (CIP)

Remove ionically bound proteins by washing the column with at least

0.5 column volumes of a 2 M NaCl solution, contact time 10–15 minutes, reversed flow direction.

Remove precipitated proteins, hydrophobically bound proteins and lipoproteins by washing the column with 1 M NaOH solution at a linear

flow rate of approximately 40 cm/h, contact time 1–2 hours, reversed flow direction.

In both cases, wash with at least 3 bed volumes of starting buffer. Remove strongly hydrophobically bound proteins, lipoproteins and lipids

by washing the column with 4 bed volumes of up to 70% ethanol or 30% isopropanol, reversed flow direction. Apply increasing gradients to avoid air bubble formation when using high concentrations of organic solvents. Alternatively, wash the column with 2 bed volumes of detergent in a basic or acidic solution. Use, for example, 0.1–0.5% nonionic detergent in 0.1 M acetic acid. Wash at a low linear flow rate of approximately 40 cm/h, contact time

p. 12

1–2 hours, reversed flow direction. After treatment with detergent always remove residual detergent by washing with 5 bed volumes of 70% ethanol.

In both cases, wash with at least 3 bed volumes of binding buffer. Sanitization

Sanitization reduces microbial contamination of the medium to a minimum. Wash the column with 0.5–1 M NaOH at a flow rate of approximately

40 cm/h, contact time 30–60 minutes, reversed flow direction.

Re-equilibrate the column with 3–5 bed volumes of sterile binding buffer. Column performance is normally not significantly changed by the

cleaning-in-place or sanitization procedures described above.

Storage

Store the medium for longer periods of time in 20% ethanol or in

0.01 M NaOH.

p. 13

7. Ordering information

Product Quantity Code No. Chelating Sepharose Fast Flow 50 ml 17-0575-01 Chelating Sepharose Fast Flow 500 ml 17-0575-02 Chelating Sepharose Fast Flow 5L 17-0575-04

Prepacked columns

HiTrap Chelating HP 5 x 1 ml 17-0408-01 HiTrap Chelating HP 5 x 5 ml 17-0409-03

Related products

Ni Sepharose 6 Fast Flow 25 ml 17-5318-01 Ni Sepharose 6 Fast Flow 100 ml 17-5318-02 Ni Sepharose 6 Fast Flow 500 ml 17-5318-03 Ni Sepharose 6 Fast Flow 1 L 17-5318-04 Ni Sepharose 6 Fast Flow 5 L 17-5318-05 HisTrap FF 5x1 ml 17-5319-01 HisTrap FF 5x5 ml 17-5255-01 HisPrep FF 1x20 ml 17-5256-01

p. 14

Empty lab-scale columns

T ricorn 10/20 column, 10 mm i.d., 1 18-1163-13 max 2.2 ml bed volume or 2.8 cm bed height

Tricorn 10/50 column, 10 mm i.d., 1 18-1163-14 max 4.5 ml bed volume or 5.8 cm bed height

Tricorn 10/100 column, 10 mm i.d., 1 18-1163-15 max 8.5 ml bed volume or 10.8 cm bed height

XK 16/20 column, 16 mm i.d., 1 18-8773-01 max 30 ml bed volume or 15 cm bed height

XK 26/20 column, 26 mm i.d., 1 18-1000-72 max 65 ml bed volume or 12.5 cm bed height

XK 50/20 column, 50 mm i.d., 1 18-1000-71 max 270 ml bed volume or 14 cm bed height

XK 50/30 column, 50 mm i.d., 1 18-8751-01 max 550 ml bed volume or 28.5 cm bed height

Literature

R ecombinant Protein Handbook, 1 18-1142-75 Protein Amplification and Simple Purification

Affinity Chromatography Handbook, 1 18-1022-29 Principles and Methods

Affinity Chromatography Columns and 1 18-1121-86 Media Product Profile

Datafile BPG columns 18-1115-23 Datafile BPG 450 columns 18-1160-59 Datafile Chromaflow columns 18-1138-92

p. 15

GE Healthcare companies. GE, imagination at work and GE monogram are trademarks of General Electric Company. BioProcess, BPG, CROMAFLOW, DropDesign, HiTrap, HisPrep, HisTrap, Sepharose and Tricorn are trademarks of Licensing information

US pat 5,284,933, US pat 5,310,663, and their equivalents in other countries (assignee: Hoffmann-La Roche, Inc.) relate to the purification and preparation of fusion proteins and affinity peptides comprising at least two adjacent histidine residues (commonly known as the histidine-tag technology).

Any customer that wishes to use Chelating Sepharose Fast Flow or Ni Sepharose 6 Fast Flow for non-research/

commercial applications under these patents is requested to contact F. Hoffmann-La Roche AG, Corporate licensing, attn. Dr Andreas Maurer, CH-4070 Basel, Switzerland, tel +41 61 687 2548, fax +41 61 687 2113, for the purpose of obtaining a license.

? 2009 General Electric Company – All rights reserved. Previously published 2005.

All goods and services are sold subject to the terms and conditions of sale of the company within GE Healthcare which supplies them. GE Healthcare reserves the right, subject to any regulatory and contractual approval, if required, to make changes in specifications and features shown herein, or discontinue the product described at any time without notice or obligation. Contact your local GE Healthcare representative for the most current information.

GE Healthcare Europe GmbH Munzinger Strasse 5D-79111 Freiburg Germany

GE Healthcare UK Ltd Amersham Place Little Chalfont

Buckinghamshire, HP7 9NA UK

GE Healthcare Bio-Sciences Corp 800 Centennial Avenue P.O. Box 1327

Piscataway, NJ 08855-1327USA

GE Healthcare Bio-Sciences KK Sanken Bldg.

3-25-1, Hyakunincho

Shinjuku-ku, Tokyo 169-0073Japan

GE Healthcare Bio-Sciences AB Bj?rkgatan 30751 84 Uppsala Sweden

https://www.wendangku.net/doc/ca16277193.html,/protein-purification

71-5001-87 AE 06/2009

门禁系统使用说明书

安装、使用产品前,请阅读安装使用说明书。 请妥善保管好本手册,以便日后能随时查阅。 GST-DJ6000系列可视对讲系统 液晶室外主机 安装使用说明书 目录 一、概述 (1) 二、特点 (2) 三、技术特性 (3) 四、结构特征与工作原理 (3) 五、安装与调试 (5) 六、使用及操作 (10) 七、故障分析与排除 (16) 海湾安全技术有限公司

一概述 GST-DJ6000可视对讲系统是海湾公司开发的集对讲、监视、锁控、呼救、报警等功能于一体的新一代可视对讲产品。产品造型美观,系统配置灵活,是一套技术先进、功能齐全的可视对讲系统。 GST-DJ6100系列液晶室外主机是一置于单元门口的可视对讲设备。本系列产品具有呼叫住户、呼叫管理中心、密码开单元门、刷卡开门和刷卡巡更等功能,并支持胁迫报警。当同一单元具有多个入口时,使用室外主机可以实现多出入口可视对讲模式。 GST-DJ6100系列液晶室外主机分两类(以下简称室外主机),十二种型号产品: 1.1黑白可视室外主机 a)GST-DJ6116可视室外主机(黑白); b)GST-DJ6118可视室外主机(黑白); c)GST-DJ6116I IC卡可视室外主机(黑白); d)GST-DJ6118I IC卡可视室外主机(黑白); e)GST-DJ6116I(MIFARE)IC卡可视室外主机(黑白); f)GST-DJ6118I(MIFARE)IC卡可视室外主机(黑白)。 1.2彩色可视液晶室外主机 g)GST-DJ6116C可视室外主机(彩色); h)GST-DJ6118C可视室外主机(彩色); i)GST-DJ6116CI IC卡可视室外主机(彩色); j)GST-DJ6118CI IC卡可视室外主机(彩色); k)GST-DJ6116CI(MIFARE)IC卡可视室外主机(彩色); GST-DJ6118CI(MIFARE)IC卡可视室外主机(彩色)。 二特点 2.1 4*4数码式按键,可以实现在1~8999间根据需求选择任意合适的数字来 对室内分机进行地址编码。 2.2每个室外主机通过层间分配器可以挂接最多2500台室内分机。 2.3支持两种密码(住户密码、公用密码)开锁,便于用户使用和管理。 2.4每户可以设置一个住户开门密码。 2.5采用128×64大屏幕液晶屏显示,可显示汉字操作提示。 2.6支持胁迫报警,住户在开门时输入胁迫密码可以产生胁迫报警。 2.7具有防拆报警功能。 2.8支持单元多门系统,每个单元可支持1~9个室外主机。 2.9密码保护功能。当使用者使用密码开门,三次尝试不对时,呼叫管理中 心。 2.10在线设置室外主机和室内分机地址,方便工程调试。 2.11室外主机内置红外线摄像头及红外补光装置,对外界光照要求低。彩色 室外主机需增加可见光照明才能得到好的夜间补偿。 2.12带IC卡室外主机支持住户卡、巡更卡、管理员卡的分类管理,可执行 刷卡开门或刷卡巡更的操作,最多可以管理900张卡片。卡片可以在本机进行注册或删除,也可以通过上位计算机进行主责或删除。

F6门禁管理系统用户手册

F6门禁管理系统用户手册 目录 1.系统软件 (2) 2.服务器连接 (2) 3.系统管理 (3) 3.1系统登录 (3) 3.2修改密码 (3) 4.联机通讯 (4) 4.1读取记录 (4) 4.2自动下载数据 (5) 4.3手动下载数据 (5) 4.4实时通讯 (6) 4.5主控设置 (6) 5.辅助管理 (8) 5.1服务器设置 (8) 5.2系统功能设置 (9) 5.3读写器设置 (10) 5.4电子地图 (13) 6.查询报表 (14) 6.1开锁查询 (14) 7.帮助 (18) 7.1帮助 (18)

1.系统软件 图1 门禁管理软件主界面 F6版门禁管理系统的软件界面如上图,顶端菜单栏包括“系统管理”、“联机通讯”、“辅助管理”、“查询报表”和“帮助”菜单;左侧快捷按钮包括“系统管理”、“联机通讯”、“辅助管理”、“查询报表”、“状态”等主功能项,每个主功能项包含几个子功能,在主界面上可以不依靠主菜单,就可在主界面中找到每个功能的快捷按钮。以下按照菜单栏的顺序进行介绍。 2.服务器连接 如图2点击设置则进入远程服务器设置,此处的远程服务器IP地址不是指数据库服务器,而是指中间层Fujica Server服务管理器的IP地址。 图2 服务连接

图2 远程服务器设置 3.系统管理 3.1系统登录 系统默认的操作员卡号为“0001”,密码为“admin”,上班人员输入管理卡号和密码后可以进入系统,进行授权给他的一切操作。 图3 系统登录 3.2修改密码 修改密码是指操作员登录成功后,可以修改自己登录的密码。先输入操作员的旧密码,再输入新密码并确认,则密码修改成功。

智能门禁管理系统说明书.doc

ID一体式/嵌入式门禁管理系统 使用说明书

1 软件使用说明 (1)配置要求 在安装软件之前,请先了解您所使用的管理电脑的配置情况。本软件要求安装在(基本配置): Windows 2000,windows xp操作系统; 奔腾II600或更高的处理器(CPU); 10GB以上硬盘; 128MB或更大的内存; 支持分辨率800*600或更高的显示器。 (2)安装说明 在光盘中运行“智能一卡通管理系统”安装程序(ID版),按照安装提示依次操作即可。 安装数据库以后,有两种创建数据库的方式,手动创建和自动创建。手动创建:在数据库SQL Server2000的数据库企业管理器中,建立一个database(数据库)。进入查询分析器/Query Analyzer 运行智能一卡通管理系统的脚本文件,形成门禁数据库表;自动创建:在安装智能一卡通管理软件中自动创建默认门禁数据库,默然数据名:znykt。 上述安装完后,在安装目录下,在first.dsn 文件中设置其参数,计算机server的名字(无服务器时即本机名)和数据库database的名字。 在桌面运行智能一卡通管理系统运行文件,选择卡号888888,密码为123456即可进入系统。 2 人事管理子系统 部门资料设置 首先运行‘智能一卡通管理系统’软件后,进入软件主界面,如下图所示:

然后点击进入“人事管理子系统”,如图所示: 选择<人事管理>菜单下的<部门管理>或点击工具栏内的‘部门管理’按钮,则会出现如下所示界面: 在<部门管理>中可以完成单位内部各个部门及其下属部门的设置。如果公司要成立新的部门,先用鼠标左键单击最上面的部门名,然后按鼠标右键弹出一菜单,在菜单中选择“增加部门”,则光标停留在窗口右边的“部门编号”输入框中,在此输入由用户自己定义的部门编号后,再在“部门名称”输入框中输入部门名称,最后按 <保存>按钮,此时发现窗口左边的结构图中多了一个新增的部门。如果要给部门设置其下属部门,则首选用鼠标左键选中该部门,再按鼠标右键弹出一菜单,在菜单中选择“增加”,最后输入、保存。同时也可以对选中的部门或下属部门进行“修改”或“删除”。特别要注意的是,如果是“删除”,则被选中的部门及其下属部门将被全部删除,所以要特别谨慎。

博克门禁系统使用说明书

《门禁系统使用说明书》

陕西********科技有限公司 单位地址:**************************** 联系电话:**************************** 目录 ( 1.1)软件系统---------------------------------------------------------------------------------------1-135 第一章软件基本操作...................................................................................................................... - 5 - 2.1进入操作软件 (5) 2.4人事管理 (7) 2.4.1 企业信息.................................................................................................................................................................. - 7 - 2.4.2添加/编辑部门信息 ................................................................................................................................................ - 9 - 2.4.2.1添加部门 ............................................................................................................................................................... - 9 - 2.4.2.2修改部门 ............................................................................................................................................................ - 10 - 2.4.2.3 删除部门 ........................................................................................................................................................... - 11 -

门禁系统使用说明书

-- - XX职业技术学院信息工程学院 门禁管理系统 操作说明书

制作人:X珍海 日期:2014年3月25日 目录 (请打开【帮助H】下的【使用说明书】,这样方便您了解本系统) 第1章软件的基本操作3 1.1 登录和进入操作软件3 1.2 设备参数设置4 1.3 部门和注册卡用户操作4 1.3.1 设置部门4 1.3.2 自动添加注册卡功能(自动发卡)5 1.4 基本操作7 1.4.1 权限管理8 1.4.2 校准系统时间11 1.5 常用工具12 1.5.1 修改登陆用户名和密码12 第2章考勤管理功能模块13 2.1 正常班考勤设置13 2.1.1 设置考勤基本规则13 2.1.2 设置节假日和周休日14 2.1.3 请假出差的设置15 2.2 考勤统计和生成报表17 2.2.1 生成考勤详细报表17 2.2.2 启用远程开门错误!未定义书签。

第1章软件的基本操作 1.1登录和进入操作软件 1.点击【开始】>【程序】>【专业智能门禁管理系统】>【专业智能门禁管理系统】或双击桌面钥匙图标的快捷方式,进入登录界面。 2.输入缺省的用户名:abc 与密码:123(注意:用户名用小写)。该用户名和密码可在软件里更改。 3.登录后显示主操作界面

入门指南。如果您没有经验,您可以在该向导的指引下完成基本的操作和设置。我们建议您熟悉后, 关闭操作入门指南,仔细阅读说明书,熟悉和掌握软件的操作。 “关闭入门指南”后,操作界面如下。 1.2设备参数设置 1.3部门和注册卡用户操作 1.3.1设置部门 点击【设置】>【部门】,进入部门界面。 点击【添加最高级部门】。

刘德华演过的电影

2007年:师奶唔易做门徒 2006年:墨子攻略 2005年:童梦奇缘、再说一次我爱你 2004年:魔幻厨房、十面埋伏、江湖、龙凤斗、天下无贼 2003年:老鼠爱上猫、大只佬、无间道3终极无间 2002年:叽咕叽咕新年财、卫斯理蓝血人、无间道 2001年:瘦身男女、全职杀手、爱君如梦 2000年:决战紫禁之巅、孤男寡女、阿虎 1999年:赌侠1999、爱情梦幻号、黑马王子、赌侠大战拉斯维加斯、暗战、龙在边缘 1998年: 黑金、龙在江湖 1997年: 天地雄心 1996年: 奇异旅程之真心爱生命、天若有情III 烽火佳人、新上海滩、1/2 次同床 1995年: 大冒险家、烈火战车 1994年: 醉拳II 、醉拳III 、天与地、杀手的童话、刀剑笑 1993年: 反斗马骝、超级学校霸王、天长地久、至尊36 计之偷天换日 1992年: 赌城大亨之新哥传奇、哗!英雄、龙腾四海、Gameboy 小子真假威龙、庙街十二少、赌城大亨II 之至尊无敌、九二神雕侠侣之痴心情长剑、侠圣、绝代双骄、战神传说 1991年: 整蛊专家、中环英雄、惊天十二小时、至尊无上之永霸天下、五虎将之决裂、极道追踪、火烧岛、冲击天子门生、五亿探长雷洛传I 之雷老虎、五亿探长雷洛传II 之父子情仇、九一神雕侠侣、与共龙舞 1990年: 富贵兵团、再战江湖、至尊计状元才、天若有情、摩登如来神掌、川岛芳子、义胆雄心、狱中龙、异域、赌侠、阿飞正传

1989年: 同根生、省港旗兵III 、飙城、最佳男朋友、傲气雄鹰、第一茧、神行太保、至尊无上、人海孤鸿、小小小警察、专钓大鳄、轰天龙虎会、法内情大结局、赌神、精装追女仔III 、爱人同志 1988年: 精装追女仔II 、中国最后一个太监、最佳损友、法内情、旺角卡门、猎鹰计划、神探父子兵、龙之家族、群龙夺宝、最佳损友闯情关 1987年: 英雄好汉、肝胆相照、江湖情 1986年: 最佳福星、魔翡翠 1985年: 夏日福星、法外情 1984年: 停不了的爱 1983年: 毁灭号地车、家在香港 1982年: 彩云曲、投奔怒海

门禁系统管理平台-详细设计说明书

门禁系统管理平台详细设计报告 2015年09月20日

目录 一、基本信息 .................................................................................................................. 错误!未定义书签。 二、市场分析 (4) 1.客户需求分析 (4) (1)国际国内市场需求量预测及客户咨询类似产品情况..... 错误!未定义书签。 (2)客户对该产品的功能、安全、使用环境要求等............. 错误!未定义书签。 2.市场现状分析 (4) 三、详细设计 (4) 1. 模块描述 (4) 2. 功能描述 (4) 3. 信息传输过程 (6) 4. 标准符合性分析 (6) 5. 验证(试制/试验/检测)确认方法、手段的分析 (8) 四、资源论证 (8) 1.人力资源需求分析 (8) 2.开发设备资源需求分析 (9) 3.项目开发成本预算 (9) 五、研发时间安排 (9) 六、项目风险评估 (10) 1.技术方面 (10) 2.人员方面 (10) 3.其它资源 (10) 七、评审结论 (11) 八、公司意见 (11)

一、市场分析 1.客户需求分析 1.2014年7月份由三大运营商出资成立了中国通信设施服务股份有限公司,同年9月份 变更名称为中国铁塔股份有限公司。铁塔公司成立后,2015年12月下旬,2000多亿存量铁塔资产基本完成交接。而从2015年1月1日起,三大运营商停止新建铁塔基站,交由中国铁塔进行建设。据统计,2015年1-11月,中国铁塔累计承接三家电信运营企业塔类建设需求53.2万座,已交付41.8万座。针对如此庞大的存量基站及新建基站。 铁塔公司总部急需对基站人员进出做到统一管理,有效管控。提高效率。因此所产生的市场需求量是很大的。 2.随着互联网及物联网技术的快速发展,原有传统门禁管理系统、单一功能的管理软件已 经无法管理众多不同品牌、不同通讯方式、不同厂家的IC/ID读卡设备,因此客户需要一种开放式、分布式的云管理平台,来管理整个基站门禁系统中的所有设备 2.市场现状分析 ●同行业中,各厂家的产品采用传统的门禁方案,既读卡器和控制器及电磁锁或电插锁对 现场的基站门进行管理。造价昂贵,安装复杂。。 ●目前大部分厂家的管理平台架构单一,系统兼容性差,各家的门禁管理平台只能兼容自 家的控制器。开放性不够。 ●目前很多厂商的平台都是针对某一个硬件厂商的设备来运行的,当项目中有多家设备时 平台的控制力明显不足 二、详细设计 1. 模块描述 铁塔基站门禁系统管理平台系统主要包括三部分:BS/CS客户端、云服务器和手机APP。 其中客户端的主要功能包括: 支持对多家基站锁具设备的识别、获取、登录 支持对不同用户进行权限划分。 支持对锁具根据区域进行分组。 支持多家基站锁具设备的设备配置 支持多家设备通过手机APP开锁、获取状态、日志查询。 支持多家设备的设备时间校准 支持设备更新,当设备更新时,可以方便的只更新涉及到的文件,而不需要重装整个系统 支持电子地图

智能门禁管理系统说明书

IC一体式/嵌入式门禁管理系统 使用说明书

目录 1.系统简介 (3) 2.功能特点 (3) 3、主要技术参数 (4) 4、系统组成 (4) 5、设备连接 (5) 6、门禁管理系统软件 (6) 6.1 软件的安装 (6) 6.2 人事管理子系统 (7) 6.3 一卡通管理系统 (9) 6.4 门禁管理子系统 (12) 7. 调试操作流程 (28) 8、注意事项 (28)

1.系统简介 在高科技发展的今天,以铁锁和钥匙为代表的传统房门管理方式已经不能满足要求,而集信息管理、计算机控制、Mifare 1 IC智能(射频)卡技术于一体的智能门禁管理系统引领我们走进新的科技生活。 Mifare 1 IC智能(射频)卡上具有先进的数据通信加密并双向验证密码系统,卡片制造时具有唯一的卡片系列号,保证每张卡片都不相同。每个扇区可有多种密码管理方式。卡片上的数据读写可超过10万次以上;数据保存期可达10年以上,且卡片抗静电保护能力达2KV以上。具有良好的安全性,保密性,耐用性。 IC卡嵌入式门禁管理系统以IC卡作为信息载体,利用控制系统对IC卡中的信息作出判断,并给电磁门锁发送控制信号以控制房门的开启。同时将读卡时间和所使用的IC卡的卡号等信息记录、存储在相应的数据库中,方便管理人员随时查询进出记录,为房门的安全管理工作提供了强有力的保证。 IC卡嵌入式门禁管理系统在发行IC卡的过程中对不同人员的进出权限进行限制,在使用卡开门时门禁控制机记录读卡信息,在管理计算机中具有查询、统计和输出报表功能,既方便授权人员的自由出入和管理,又杜绝了外来人员的随意进出,提高了安全防范能力。 IC卡嵌入式门禁管理系统,在线监控IC卡开门信息、门状态,给客户以直观的门锁管理信息。 IC卡嵌入式门禁(简称门禁读卡器,门禁控制机,控制器)是目前同行业产品中体积较小的门禁,可以嵌入到市场上几乎所有的楼宇门禁控制器中,解决了因为楼宇门禁控制器内部空间小所带来的麻烦,是楼宇门禁控制器的最佳配套产品;它绝不仅仅是简单的门锁工具,而是一种快捷方便、安全可靠、一劳永逸的多功能、高效率、高档次的管理系统。它能够让你实实在在享受高科技带来的诸多实惠和方便。 2.功能特点 2.1.IC卡嵌入式门禁具有的功能: 2.1.1使用MIFARE 1 IC卡代替钥匙,开门快捷,安全方便。 2.1.2经过授权,一张IC卡可以开启多个门(255个以内)。 2.1.3可以随时更改、取消有关人员的开门权限。 2.1.4读卡过程多重确认,密钥算法,IC卡不可复制,安全可靠。 2.1.5具有512条黑名单。

门禁管理系统使用说明书

门禁管理系统使用说明书

乌石化汽车定量装车系统 门禁管理系统使用说明书 河北珠峰仪器仪表设备有限公司 2013.08.03

目录 一、系统组成 (5) 二、道闸 (5) 1.主要特点 (5) 2. 设备组成 (6) 3. 基本工作原理 (7) 4. 设备使用说明 (7) 三、车辆检测器 (8) 1.车辆检测器的安装 8 2.主要技术参数 8 3.车辆检测器的接线图 8 4.车辆检测器灵敏度设置 9 四、门禁控制器 (9) 五、读卡器 (10) 六、车牌识别 (11) 七、摄像机 (12) 八、门禁控制管理软件 (13) 九、常见问题及解决方法 (14)

一、系统组成 门禁管理系统由行人出入口读卡器、行人大门电磁锁、车辆出入口道闸、摄像机、白光灯、车牌识别仪、控制主机、数据存储服务器等组成。 门禁控制系统组成 二、道闸 车辆出入口道闸采用深圳捷顺生成的JSDZ0203数字式道闸,该道闸采用先进的直流伺服技术和全电路无触点控制技术,使整机运行更加平稳、可靠。而且采用了数字化电路自学习检测功能,有效地杜绝砸车现象,使系统运行更安全可靠。并配备了标准的外接电气接口,可配置车辆检测器以及上位机,实现系统的自动控制。可广泛适用于道路管理、道路收费及停车场管理等系统中。1.主要特点 1)外形美观大方,结构轻巧;部件标准化,可方便更换;箱体铝合金制作,防 水防锈。 2)集光、电、机械控制于一体,操作灵活、方便,使用安全、可靠。

3)系统具有极限位置自锁功能或人为抬杆报警功能(可根据要求设定)。 4)采用先进的直流伺服控制技术,确保系统动作更加准确、平稳。 5)全电路无触点控制,确保系统运行更加安全、可靠。 6)采用PWM调速实现了无极变速,可根据现场需要在速度段内任意调整。 7)按钮滚动菜单设置方式,方便快捷设置闸机运行参数,可根据现场需要进行 设置。 8)采用数字化电路的自学习功能,采集闸杆运行数据并进行计算来判断闸杆是 否碰到障碍物,若检测碰到障碍物,闸杆则会立即自动升起。 9)强、弱电智能控制系统,除具有一般电气控制功能外,既可使用三联按钮、 遥控装置进行手动控制,也可通过车辆检测器进行自动控制,而且系统对外配置标准485电气接口,可通过电脑对其进行远程控制与管理。 10)手动开闸记忆功能:在系统自动运行中,非正常人为开闸数据将被系统自动 记录下来备查询,有效防止人为作弊。 11)开闸次数记忆功能:在系统自动运行中,道闸将会记忆上位机发出的开闸指 令次数,闸杆会保持开状态直到车辆检测器感应车次与开闸指令次数等同时才进行关闸动作。 12)手摇自动升杆功能:在意外断电情况下可用手摇摇柄轻轻摇动使关到位的闸 杆偏离水平方向约30度,闸杆则会自行升起。 13)温度控制功能:闸机可自动检测工作环境温度,并启动温控装置进行温度调 整,保证设备在高低温环境下正常工作。 14)各运动部件均已调整到最佳运动和平衡状态,故本机性能稳定,运行平稳, 噪声小,使用寿命长。 2. 设备组成 JSDZ0203道闸主要由主机、闸杆插头、闸杆等组成,而主机则由机箱、机芯和电控系统等组成 ,见下图。

整蛊邻居2攻略

第1关 主要是按照导演的指示来,但是如果要拿奖杯的话就得连贯的执行,不要耽误时间,否则老头的怒槽就会下降,呵呵.在用了扳手和肥皂之后,马上去把面条弄到帽子里,这样就OK了。 第2关 物品: 鱼翅(垃圾箱),电鳗(水族箱,需要水桶),水桶(用来装电鳗),锯子-剑鱼?头(广告牌),水草(左下角),竹竿(中上),螃蟹(需要竹竿) 流程: 等老头上楼后,先去弄倒耙子,再把水草放在上面,然后把螃蟹放到冰镇桶(放啤酒的)里,然后马上回到左边把鲨鱼翅装在玩具潜艇上,然后上到左上,等老头下去后马上到右上,把电鳗倒到池塘里,用锯子把栏杆做手脚,收工~ 第3关 物品: 尼龙袜(右下提包里),辣椒酱(小食店),炮弹(右上),润滑油(右上),扳手(左上工具包 流程: 等老头结束演讲,对发电机使用尼龙袜-〉在厕纸上使用辣椒酱-〉在火箭把手上使用润滑油-〉在西瓜上使用炮弹-〉在自行车上使用扳手 第4关 物品: 玩具熊(左上夹娃娃的游戏机),拉炮(右上用玩具熊和小孩交换),石砖(右上),剪刀(右上),脸盆(右下),伞把(左下),发蜡?(左上用脸盆装) 流程:

左上大锣使用伞把->右上热狗使用拉炮->右下有项链的花瓶使用剪刀->另外一个花瓶使用发蜡->左下空手道劈砖使用石砖->人力车把手使用发蜡 第5关 物品: 厨子的眼镜(左上),鸭蛋(左上),自行车内胎(右上),锤子和钉子(右上),绳子(右下锚上) 爆竹(左下),石狮子头(右上,在有裂缝的石狮子上使用爆竹,用眼镜点燃) 流程: 等老头吃完东西->对放食物的篓子使用内胎->等老头去打乒乓->在冲天炮上使用绳子,在冲浪板上使用锤子和钉子->在沙堆(小孩)上使用石狮子头-〉绕到右上,等老头离开右下后在乒乓球上使用鸭蛋~ 第6关 这关比较简单,先按提示拿热水袋,顺便拿右边箱子里的橡皮筋,然后上去按提示放热水袋,躲到烟囱里,等老头被他母亲打PP后,到左上,捡起玩具兔和有虱子的毛巾,然后在左上工具箱拿万能胶,等老头离开左下后,到左下,对楼梯旁的标枪使用橡皮筋,把玩具兔放到架子旁边的玩具箱上,然后到右下,使用有虱子的毛巾,然后老头离开右上后就马上上去,对放爆竹的箱子使用万能胶,然后马上下去或者躲到烟囱里,收工~ 第7关 物品: 海胆(右下),摩托踏脚(右下),弹簧(右下),威士忌(左下),水桶(右上,用威士忌灌醉服务生就可以拿了,然后再到左上水龙头接水),夹子(右上),螃蟹(右下用夹子夹) 流程: 在物品都到手后,在老头跳水后,到跳板,使用弹簧-〉老头到右下后,到右上,在大象旁放下装满水的水桶-〉老头到左下,到右下,在海螺上使用螃蟹,然后再夹一只螃蟹-〉到左下,在小孩城堡放螃蟹,在毯子上放海胆-〉到左上,在遮阳篷的架子旁使用摩托脚踏,收起棚子,然后到跳板旁拿回弹簧再装上-〉到右上看好戏~

门禁系统使用说明书1

门禁控制系统 使 用 说 明 书 公司名称: 联系人: 联系电话:

目录 一、系统概况 ..................................................... 错误!未定义书签。 二、系统组成 ..................................................... 错误!未定义书签。 三、系统使用 ..................................................... 错误!未定义书签。 1、IC感应卡 ................................................. 错误!未定义书签。 2、读卡器 ...................................................... 错误!未定义书签。 3、进出门按钮 .............................................. 错误!未定义书签。 4、机箱电源 .................................................. 错误!未定义书签。 5、系统控制器 .............................................. 错误!未定义书签。 6、电脑软件 .................................................. 错误!未定义书签。 6.1 进入和登陆操作软件 .......................... 错误!未定义书签。 6.2 添加IC感应卡的用户 ...................... 错误!未定义书签。 6.3 设置I C卡进出权限 ......................... 错误!未定义书签。 6.4 怎样查询记录 ...................................... 错误!未定义书签。 7、485/232信号转换器 ................................ 错误!未定义书签。 8、电锁........................................................... 错误!未定义书签。 四、简单的维修维护............................................................................. 错误!未定义书签。

整蛊邻居2 游戏攻略

整蛊邻居2 游戏攻略 第1关 主要是按照导演的指示来,但是如果要拿奖杯的话就得连贯的执行,不要耽误时间,否则 老头的怒槽就会下降,呵呵.在用了扳手和肥皂之后,马上去把面条弄到帽子里,这样就OK 了。 第2关 物品: 鱼翅(垃圾箱),电鳗(水族箱,需要水桶),水桶(用来装电鳗),锯子-剑鱼?头(广告牌),水 草(左下角),竹竿(中上),螃蟹(需要竹竿) 流程: 等老头上楼后,先去弄倒耙子,再把水草放在上面,然后把螃蟹放到冰镇桶(放啤酒的)里,然后马上回到左边把鲨鱼翅装在玩具潜艇上,然后上到左上,等老头下去后马上到右上,把电 鳗倒到池塘里,用锯子把栏杆做手脚,收工~ 第3关 物品: 尼龙袜(右下提包里),辣椒酱(小食店),炮弹(右上),润滑油(右上),扳手(左上工具包 流程: 等老头结束演讲,对发电机使用尼龙袜-〉在厕纸上使用辣椒酱-〉在火箭把手上使用润 滑油-〉在西瓜上使用炮弹-〉在自行车上使用扳手 第4关 物品:玩具熊(左上夹娃娃的游戏机),拉炮(右上用玩具熊和小孩交换),石砖(右上),剪刀(右上),脸盆(右下),伞把(左下),发蜡?(左上用脸盆装) 流程: 左上大锣使用伞把->右上热狗使用拉炮->右下有项链的花瓶使用剪刀->另外一个花 瓶使用发蜡->左下空手道劈砖使用石砖->人力车把手使用发蜡 第5关物品: 厨子的眼镜(左上),鸭蛋(左上),自行车内胎(右上),锤子和钉子(右上),绳子(右下锚上) 爆竹(左下),石狮子头(右上,在有裂缝的石狮子上使用爆竹,用眼镜点燃) 流程: 等老头吃完东西->对放食物的篓子使用内胎->等老头去打乒乓->在冲天炮上使用绳子,在冲浪板上使用锤子和钉子->在沙堆(小孩)上使用石狮子头-〉绕到右上,等老头离开 右下后在乒乓球上使用鸭蛋~ 第6关这关比较简单,先按提示拿热水袋,顺便拿右边箱子里的橡皮筋,然后上去按提 示放热水袋,躲到烟囱里,等老头被他母亲打PP后,到左上,捡起玩具兔和有虱子的毛巾,

门禁系统操作手册

欢迎阅读 I 第1章系统简介 1.1系统功能简介 安全管理在近些年的现代企业管理中越来越受到管理者的关注。本系统实现门禁系统管理统一化、流程化, 并帮助客户实现运营安全。 ? 系统特点 .强大的数据处理能力,能管理30000个人员的门禁数据,能连接100台设备。 .形象而合理的操作流程融合了多年的门禁经验。 .自动化的用户名单管理,使得管理更科学、高效。 .建立在多级管理角色上的权限管理,能保证用户数据的保密性。 服务器硬件配置要求 :主频2.0G 以上。 内存:1G 及以上。 硬盘:可用空间10G 及以上,推荐使用NTFS 的硬盘分区作为系统安装目录(NTFS 硬盘分区能提供更好的性能和更高的安全性)。 系统运行环境 可支持的操作系统:WindowsXP/Windows2003/WindowsVista/Windows7 可支持的数据库:MSSQLServer2005/MicrosoftAccess 系统功能模块介绍 本系统主要分为四大功能模块: 人事:主要包括两部分,一是部门管理设置,即设置公司的主要架构;二是人员管理设置,为系统录入人员,分配部门,然后进行人员维护管理。 设备:设置连接设备的通信参数,通信参数正确才能够与设备正常通信,包括系统中的设置和设备中的设置。 通信成功后就能查看到已连接设备的信息并能对设备进行远程监控、上传、下载等操作。 ? 备注:指静脉功能在系统的“设备”和“人员”界面显示。 门禁:基于C/S 框架的管理系统,能够实现普通门禁功能,通过计算机对网络门禁控制器进行管理,实现 对人员进出的统一管理。门禁系统是对已经登记用户的开门时间及权限进行设置;即在某个时间段内,在某些门 上,允许某些用户可以验证开锁。 1

门禁系统使用说明

门禁系统使用说明 一、硬件设备稳定运行的先决条件 保证系统各组成部分----前段读卡器、磁力锁、门禁控制器有稳定的UPS电源支持,各个相关门自然状态开关闭合良好。 二、门禁管理系统的操作指南 2.1 登录和进入操作软件 点击开始\程序\iCCard\一卡通[门禁考勤]V6.5,或者双击桌面的快捷方式 进入登录界面。 输入缺省的用户名:admin密码:888888 (注意:用户名用小写)。该用户名和密码可在软件里更改。具体操作请参考相关内容。

3登录后显示主操作界面 2.2 怎样更改控制方式和设置开门延时时间 在【总控台】界面中,鼠标右键单击某个门会弹出菜单。可以设置开门延时和控制方式。所谓开门延时时间,是指门打开多长时间后会自动关闭,缺省是 3秒,可设置为 1-6000秒之间的任一时间。 2.3.1 设置部门和班组名称

单击设置\部门信息进入以下界面 单击 [新增] 可添加部门,可设置所属公司、部门级别、上级部门、部门描述。 2.3.2 添加注册卡用户 单击门禁\持卡人进入以下界面

单击然后在文本输入栏中填写您要添加的相应 姓名选定卡号(在ID感应卡表面一般会印刷两组号码, 0013951989 212 58357 前面10位数为内置出厂号不用管他,后面 212 58357 中间的空格不要,这8位数就是真正的卡号。如果卡上没有印刷卡号, 请用实时监控功能来获取卡号)。选择相应的部门和班组名称。除卡 号外所有的信息都可以修改。如果卡遗失,请到(工具――挂失卡)菜单中挂失相应的卡片。一般的软件挂失卡后会用新卡号全部修改以 前的记录设置,我们的软件会进行科学的标注,以前的记录继续可以 保留。 编号可以自动生成无需修改。姓名和卡号是必填项目,工号可以输入 字母和数字的组合,可填可不填。如果该持卡人不需要考勤,请将 的勾去掉。但是如果需要考勤,此处一定要打勾。 单击该按钮后,就已经将该用户加入系统中。

门禁管理系统使用说明书

门禁管理系统使用 说明书

乌石化汽车定量装车系统 门禁管理系统使用说明书 河北珠峰仪器仪表设备有限公司 .08.03

目录 一、系统组成 .............................................................. 错误!未定义书签。 二、道闸 ...................................................................... 错误!未定义书签。 1.主要特点 ....................................................... 错误!未定义书签。 2. 设备组成 ......................................................... 错误!未定义书签。 3. 基本工作原理.................................................. 错误!未定义书签。 4. 设备使用说明.................................................. 错误!未定义书签。 三、车辆检测器 .......................................................... 错误!未定义书签。 1. 车辆检测器的安装......................................... 错误!未定义书签。 2. 主要技术参数................................................. 错误!未定义书签。 3. 车辆检测器的接线图 ..................................... 错误!未定义书签。 4. 车辆检测器灵敏度设置 ................................. 错误!未定义书签。 四、门禁控制器 .......................................................... 错误!未定义书签。 五、读卡器 .................................................................. 错误!未定义书签。 六、车牌识别 .............................................................. 错误!未定义书签。 七、摄像机 .................................................................. 错误!未定义书签。 八、门禁控制管理软件............................................... 错误!未定义书签。 九、常见问题及解决方法........................................... 错误!未定义书签。

门禁系统说明书

门禁系统入门指南 系统登录 1.点击开始\程序\STOneCard\一卡通门禁管理,或者双击桌面的快捷方式。进入登录界面。 2.选择缺省的用户名:Admin 密码:空该用户名和密码可在软件里更改。选中上图的更改密码选项后,点击确定,弹出密码更改框,输入新密码,即可更改,如下图所示:

门禁管理主界面 主界面:显示常用功能模块和操作流程系统参数系统管理->系统参数

系统参数:主要设置进出门事件是否显示人员照片和是否需要将卡号转换为Wigand26格式,上次清理数据日期,是否采用IC卡序列号做门禁卡号,初始化时段。 如果有勾选中进门\出门事件是否显示人员照片,则只要发生进出门事件即可显示当前人员照片信息. 如果有选中是否需要将卡号转换为Wigand26格式,则10位卡号将自动转换为8位卡号.在核心平台用读卡器发卡即可. 如:ID卡号:0000924214 014 06710 发给姓名为:张三:卡号为前十位: 924214,则在门禁机上刷卡,显示后卡号:924214且将显示姓名 如果没有选中是否需要将卡号转换为Wigand26格式,则需要用定自8位读卡器发卡才可用.否则发卡后,在门禁机读卡器刷卡,在门禁控制台上显示非法卡,8位卡号,且将不显示姓名如:ID卡号:0000924214 014 06710 发给姓名为:张三:卡号为前十位: 924214,则在门禁机上刷卡,显示后卡号:1406710且将不显示姓名 初始化时段:将门属性的开关时段初始化为一个默认开关时段,将人员设置的进出时段初始化为一个默认进出时段.创建数据库时会自动初始化一个门默认开关进段和一个人进出默认进出时段 如::如果有多个门开关时段和多个人进出时段,进行初始化是会初始化最小时段编号,如:门开关时段有编号1.2.3,人进出时段编号有4,5,6,时行初始化时,初始化门开关时段编号为1和人进出时段编号为:4. 操作说明:点进“初始化时段”输入密码,点击“确定”即可。 注意事项: 1.卡位数不一定是10位或8位,只是一个概念,用于区别而己 2.门禁是读8位卡号,显示出来的是已转换成十位的卡号. 3.初始化时段前,需先进入人员设置模块。 控制器设置 门禁管理->控制器设置

门禁系统使用说明书

目录 一系统概述 (01) 二系统操作 (04) 三系统编程 (09) 四系统配置及选材 (19) 五系统原理图 (21) 六系统连线示意图 (25) 七安装调试 (29) 八系统各部件的安装说明 (31) 九其它事项 (31) 备注:本手册中所提及的终端设备(门口机、分机、管理机、围墙机),除特别说明外,主要是以可视系统AB-6A-402的设备为主。

第 页 1 一、系统概述 AB-6A-402楼宇对讲系统是采用单片机微电脑控制技术,数位总线传输技术而设计的小区联网可视对讲系统。系统数据传输距离可达5000米(需加中继器),防雷抗干扰,可实现大型小区的系统联网。AB-6A-401楼宇对讲系统是非可视系统,除无视频外,其余性能与AB-6A-402系统相同。两种系统主要适用于高楼大厦房型。 整个系统由门口主机(带联网功能)、室内分机、信号隔离器、主机电源、管理中心、管理中心电源、多门选择器、围墙机、信号中继器以及联网信号切换器等设备构成。(见下表)

第 页 2

第 页 3 ◇ 编码门口主机AB-402D 长×宽×厚(mm) 外形尺寸:316×136×56 开孔尺寸:280×114×34 ◇ 可视室内分机 长×宽×厚(mm) 外形尺寸:220×205×65(AB-402M ) 235×188×50(AB-402MQ ) ◇ 信号隔离器(AB-402A ,AB-402B ) 长×宽×厚(mm) 外形尺寸:85×85×37

第 页 4 ◇ 主机电源/隔离器电源/管理中心电源 (UPS-DP/UPS-P/UPS-CP ) 长×宽×厚(mm) 外形尺寸:190×180×73 ◇ 管理中心(AB-602C ) 长×宽×厚(mm) 外形尺寸:240×267×65 二、系统操作 (一)门口机(402D )与用户分机通话 1.来访者键入用户分机号码,若号码正确,则门口机发出悦耳的回铃声,呼叫开始。若号码错误或该分机不存在,则经过短暂等待后,门口机将显示“Err ”,然后返回至待机状态。 2. 若呼叫有效,分机发出悦耳的振铃声,同时来访者的影像亦将出现在可视分机的显示屏上。此时用户摘机,可与来访者通话。 3.在通话中,用户可按开锁键,打开相应门的电控锁并结束通话。 4.在呼叫或通话过程中,门口机上的“*”键被按下,则门口机当前

门禁系统操作手册

门禁软件系统使用详解 1.软件功能简介 门禁管理系统主要功能为门禁设置、系统监控、数据采集与处理,用户可以完成系统网络配置、员工设置、权限设置等;软件提供实时事件列表和实时状态及报警事件列表,使用户对系统动作状态有即时的掌握;同时软件实现对智能设备的管理,进行数据下载、远程控制、数据采集。软件具有输出报表功能,可以根据不同的用户要求生成不同类型的报表文件,适应于不同的应用。 ● 软件简单易用,界面清晰; ● 实时事件列表和实时状态功能,对报警事件作单独的处理; ● 硬件控制功能,实现参数设置、远程控制门、门状态检测、系统时间设置等; ● 支持硬件系统脱机操作,可以在系统连机后采集数据; ● 系统具有自测功能,根据用户的设定检测系统运行状态; ● 对网络硬件采用树型管理方式,组织关系直观明了; ● 分级系统操作管理员,提高系统安全性能; ● 支持无限多的用户定义时间段数 ● 多种出入权限模式(单卡、双卡、卡加密码、密码、无限制通行) ● 出入口的权限为时间段与出入模式的组合,针对不同员工、地点可实现细致的划分; ● 持卡人出入权限分配简单灵活,可按出入点或时间段等方式进行分配; ● 详细的员工资料管理,包括:员工的姓名、照片、职务、部门、卡号、生日、入职日期、工号、地址、电话; ● 支持卡号预先录入功能,无需人工录入; ● 灵活的报表输出功能,可按部门、职位、有卡、无卡、事件类型、事件来源、工号、卡号或根据用户需要定制不同的条件,生成报表,或存成文件格式存档或电子邮件发给不同地方的管理者。 2.门禁系统软件快速入门

1.操作功能面板:是指软件操作功能的一个集合,软件所有功能都在此面板内,通过操作此面板来实现门禁相关功能; 2.设备或部门选择树:选择当前操作的对象,对象可以是某个部门、或某个控制器、或控制器的某个门。一次可以从该<设备或部门选择树>中,选择一个或多个操作对象; 3.快捷功能工具条:将<操作功能面板>中的某些常用功能,放到该工具条上,方便快捷操作; 4.编辑常用工具条:对当前<功能操作区>的操作对象,进行“新增”、“修改”、“删除”、“选中”等操作功能的一个集合工具条,操作对象具体来说,就是从<设备或部门选择树>选择过来的部门、控制器以及某个具体的门; 5.功能操作区:对某项功能进行操作的工作区,一般包括“功能操作按键”、“操作对象列表”、“信息显示”等 6.操作对象列表:是指需要操作的对象都放在此列表内,根据功能不同可以勾选后,单个执行某项功能或一起执行,简单化操作。 7.功能操作按键:对选中的对象,执行具体的某项功能。 3.软件常规操作步骤 第一步:在<操作功能面板>或<快捷功能工具条>中,选择你需要操作的功能项;

相关文档
相关文档 最新文档