文档库 最新最全的文档下载
当前位置:文档库 › GM material specification

GM material specification

GM material specification
GM material specification

On Engine and Transmission Components/Assemblies ?Copyright2001General Motors Corporation All Rights Reserved

June2001O riginating Department:North American Engineering Standards,Records and

Documentation Page1of4

1Scope

This document outlines a method for determining the weight of foreign material retained in metal mold castings,or in finish-machined components after final washing and just prior to assembly.This method may be used to quantify foreign material present in components,sub-assemblies and assemblies.

The method involves washing engine and transmission components deemed necessary with a specified wash fluid,collecting the rinse wash fluid,filtering solid materials from it and determining the weight of solids present.

Note:Nothing in this test method supersedes applicable laws and regulations unless a specific exemption has been obtained.

Note:In the event of a conflict between the English and domestic language,the English language shall take precedence.

2References

Note:Only the latest approved standards are applicable unless otherwise specified.

2.1Normative.None

2.2GM.GMW3059

2.3Additional.None

3Test Equipment

A list of equipment and materials which may be necessary and useful in evaluating components for sediment levels is shown in Appendix A.Specific recommendations as to equipment models and brands are listed in Appendix B.

4Test Material 4.1For engine components,10-micron filter paper or nylon filter membranes shall be used. Nylon membranes have been found to absorb less fluid(thus requiring less drying time)and to facilitate qualitative analysis of sediment;however, they are more costly.

4.2For transmission components,sub-assemblies and assemblies,44-micron and10-micron filters in series are required.

4.3A5-micron filter(or equivalent)shall be used for filtering wash fluid that is recycled to a reservoir.

4.4Acceptable wash fluids are listed in Appendix B.

5Test Method

5.1Summary of Test Method

This method involves removal of sediment from production components by rinsing,collecting the sediment using suitable filtering apparatus,and weighing and reporting the total mass of sediment found.

5.2Test Sample Preparation

Prior to sediment evaluation,test samples must not be rinsed,wiped or cleaned in any way other than what is typical for the production process.Lot numbers or other pertinent shipment information should be recorded for samples to be tested.

5.2.1Transmission components,sub-assemblies and assemblies shall be obtained in accordance with local plant procedures as to sampling point and frequency.

5.2.1.1When evaluating assemblies,torque converters shall be checked separately,exterior surfaces shall not be rinsed as part of the procedure,and valves shall not be removed from bores.

5.2.2Engine components shall be obtained from the production line at final washer exit in order to monitor and control washer effectiveness.

GMN6752

GM ENGINEERING STANDARDS

?Copyright 2001General Motors Corporation All Rights Reserved

Page 2of 4June 2001

5.2.2.1Components may be obtained from the production process at the point of their inclusion into the engine assembly (if they are washed at the engine plant)or as shipped from a supplier (if shipped directly to the assembly line).

5.2.2.2Test frequency should be daily by component.Sample size must be sufficient to allow for statistical control of production processes and establishment of control limits.Reduced sampling is possible based on statistical data showing process capability.

5.2.2.3Reintroduction of test samples into the production process must occur before the final wash.

5.3Test Procedure 5.3.1

Prepare test equipment and materials.

5.3.1.1Oven dry the required number of filters for 2hours minimum.Allow filters to cool for approximately 30minutes in a desiccator prior to use.Filter drying time may be significantly reduced depending on current plant practices and production schedules.

5.3.1.2Record the weight of filters in grams to four decimal places.

5.3.1.3Rinse collection sink/tray with wash fluid and squeegee (optional)to remove foreign materials.Equipment and materials should be protected from environmental contamination and should be clean and dry.

5.3.1.4Monthly wash fluid cleanliness check (for sites that recycle fluid).Collect at least 1liter of wash fluid in a clean beaker and note the volume used.Filter the fluid with vacuum assist through a pre-dried and pre-weighed 10-micron filter.Remove filter from the funnel and expose to drying cycle (5.3.5).Determine amount of residue collected by subtracting original filter weight from weight of filter+residue.If amount of residue exceeds 0.50mg/liter,wash fluid must be replaced with new.Wash fluid must be replaced annually regardless of test results.

5.3.2Place component to be evaluated in the clean collection tray and rinse surfaces of interest with wash fluid.Engine Plant rinse device should include a 3.0mm (inside diameter)spray nozzle and a pressurized wash fluid reservoir resulting in a constant 1.0l/minute (minimum)flow rate of wash fluid onto the sample.Transmission Plant rinse device will be a hand held spray gun with 10psi nozzle pressure (see Appendix B for specific equipment part numbers).Effort should be made to insure that all foreign material and loose debris

is removed from the component.Collect all wash fluid in a clean beaker making sure to flush,squeegee (optional)and collect all sediment from the tray.Mark the beaker for identification.5.3.2.1Engine components with internal oil and/or coolant passages (ie engine blocks)shall be rinsed such that sediment levels are established for each type of passage.Water passages must be rinsed first.Though not required,a brush may be used to help remove sediment from a passage;however,a different clean brush should be used for each type of passage (ie oil galleries,coolant passages,etc.).

5.3.2.2Burrs resulting from machining operations,casting processes,etc.which remain attached after rinsing (5.3.2)shall be documented and reported to the appropriate manufacturing department.Local procedures may dictate that attached burrs be manually detached after rinsing and included in the total sediment weight.

5.3.2.3Any plant specific procedures regarding rinsing sequence,burr reporting,etc.must be the same site-to-site for similar components.

5.3.3Place dried and weighed 10-micron filter (engine component)or 44and 10-micron filters (transmission components)in the filtration funnel.5.3.4Remove the beaker from the collection tray and filter its contents through the funnel using a vacuum assist.Rinse the beaker thoroughly and transfer the wash fluid to the funnel for filtering.5.3.5Carefully remove the filter from funnel and expose to one of the following drying cycles.5.3.5.1For transmission assemblies,filters must be dried 12hours minimum at 60°C.For components and sub-assemblies,filter drying cycle will vary and depend on time required for filter weight to stabilize.

5.3.5.2For engine components,filters must be dried a minimum of 2hours when water-based wash fluids are used.Filter drying time may be significantly reduced depending on current plant practices and production schedules as long as there is evidence that filter weight has stabilized for that cycle.

5.3.6After drying,the filters shall be placed in a desiccator to cool for approximately 30minutes.Debris samples must be properly identified.5.3.7Weigh dried filter+sediment and record weight.

5.3.8Return washed parts to departments from which they were taken unless surface condition

GM ENGINEERING STANDARDS

GMN6752

?Copyright 2001General Motors Corporation All Rights Reserved

June 2001Page 3of 4

has been degraded or component has been disassembled during sediment testing.Transmission seals and clutch plates must be scrapped.

6Evaluation and Rating

6.1Determine total sediment weight by subtracting filter weight (5.3.1.2)from weight of filter+sediment (5.3.7).

6.1.1The need for additional sediment analysis will depend on whether possible sources of contamination must be identified.

7Report

7.1Transfer engine data to SPC charts and plot the data,where applicable.Transmission data should be recorded on suitable Quality charts.7.2Notify Production department supervisor of any out-of-control points or otherwise undesirable conditions.

8Safety

This method may involve hazardous materials,operations and equipment.This method does not propose to address all the safety problems associated with its use.It is the responsibility of the user of this method to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

9Coding system

This material specification shall be given in other documents,drawings,VTS,SSTS,CTS etc.as follows:

Test to:GMN6752Where GMN =Validation Area (North American)

GMN#

=

Base Test Method Specification

10Release and Revisions

10.1Release.

This test method originated in February,2001and was approved by PT/Matls.Engrg.in February,2001.It was first published in June,2001.

10.2Revisions.Rev

Date

Description (Organization)

2/01Initial Rel.(PT/Matls.Engrg)A

2/02

Re-write to commonize Engine and Trans.

Procedures.(PT/Matls.Engrg &Plants)

GMN6752GM ENGINEERING STANDARDS

?Copyright 2001General Motors Corporation All Rights Reserved

Page 4of 4June 2001

Appendix A

This test method will require the use of most of the following lab equipment.A1Drying oven with thermometer A2Desiccator A3Magnet

A4Analytical balance A5Brushes

A6Vacuum pump,manifold and trap A7Squeegee A8

Drum pump

A9Stainless rinse collection sink (washable,drainable)

A10Side-arm flask,filter funnel,beakers,wash bottles A11Sediment wash cart A12

Air line and hose

Appendix B

Some specific equipment that has proven useful in testing is listed below.Other brands/models may be used as long as the test procedure is not compromised.B1Nalgene vacuum manifold –Catalog #345-

0001

B2Jabsco drum pump –Model #16520-3350(To be used with air pressure of 50psi).

B3Spraying Systems Co.GunJet –Model #31-39430(Source:Industrial Hose and Hydraulics,Ltd.,905-688-1243).

B4Vacuum pump –Gast 0211Series,oiless (Pump to be set at 15in.of Hg.);or Piab,Inc.B5Wash Fluids –TechSolv 331or 336;Chemcentral SC142;Betz Permatreat 435(4%solution);Citrikleen 3SR166(1:10in water);Odorless mineral spirits (Transmissions only).B6Nylon filter membranes –Great Lakes Filters P/N’s 325-041-8000(engines)and 321-041-8000(transmissions).Phone #800-521-8565.B7Stereo-microscope.

B8

Solvent Handling System (Transmissions)

B8.1Sanborn paint tank and sprayer #011-0798(pressurized container).

B8.2Whatman Gamma-12high performance in-line filter unit.B8.3Whatman filter tube 12-10(VWR #28205-349).B8.4Whatman filter tube 12-80(VWR #28205-280).B8.5Millipore 25mm Filter-Jet solvent dispenser.B9

Vacuum Filtration System (Transmissions)

B9.1Kewaunee Scientific

4-foot

airflow

supreme hood.B9.2Gelman Sciences parabolic filter 4230.B9.3

Funnel with Essig fitting.

B9.4Gelman Sciences support screen 4235,serial #14770-00.B9.55-gallon bottle.

B9.6

Hazardous waste collection drum.

图像处理中值滤波器中英文对照外文翻译文献

中英文资料对照外文翻译 一、英文原文 A NEW CONTENT BASED MEDIAN FILTER ABSTRACT In this paper the hardware implementation of a contentbased median filter suitabl e for real-time impulse noise suppression is presented. The function of the proposed ci rcuitry is adaptive; it detects the existence of impulse noise in an image neighborhood and applies the median filter operator only when necessary. In this way, the blurring o f the imagein process is avoided and the integrity of edge and detail information is pre served. The proposed digital hardware structure is capable of processing gray-scale im ages of 8-bit resolution and is fully pipelined, whereas parallel processing is used to m inimize computational time. The architecturepresented was implemented in FPGA an d it can be used in industrial imaging applications, where fast processing is of the utm ost importance. The typical system clock frequency is 55 MHz. 1. INTRODUCTION Two applications of great importance in the area of image processing are noise filtering and image enhancement [1].These tasks are an essential part of any image pro cessor,whether the final image is utilized for visual interpretation or for automatic an alysis. The aim of noise filtering is to eliminate noise and its effects on the original im age, while corrupting the image as little as possible. To this end, nonlinear techniques (like the median and, in general, order statistics filters) have been found to provide mo re satisfactory results in comparison to linear methods. Impulse noise exists in many p ractical applications and can be generated by various sources, including a number of man made phenomena, such as unprotected switches, industrial machines and car ign ition systems. Images are often corrupted by impulse noise due to a noisy sensor or ch annel transmission errors. The most common method used for impulse noise suppressi on n forgray-scale and color images is the median filter (MF) [2].The basic drawback o f the application of the MF is the blurringof the image in process. In the general case,t he filter is applied uniformly across an image, modifying pixels that arenot contamina ted by noise. In this way, the effective elimination of impulse noise is often at the exp ense of an overalldegradation of the image and blurred or distorted features[3].In this paper an intelligent hardware structure of a content based median filter (CBMF) suita ble for impulse noise suppression is presented. The function of the proposed circuit is to detect the existence of noise in the image window and apply the corresponding MF

图像处理外文翻译 (2)

附录一英文原文 Illustrator software and Photoshop software difference Photoshop and Illustrator is by Adobe product of our company, but as everyone more familiar Photoshop software, set scanning images, editing modification, image production, advertising creative, image input and output in one of the image processing software, favored by the vast number of graphic design personnel and computer art lovers alike. Photoshop expertise in image processing, and not graphics creation. Its application field, also very extensive, images, graphics, text, video, publishing various aspects have involved. Look from the function, Photoshop can be divided into image editing, image synthesis, school tonal color and special effects production parts. Image editing is image processing based on the image, can do all kinds of transform such as amplifier, reducing, rotation, lean, mirror, clairvoyant, etc. Also can copy, remove stain, repair damaged image, to modify etc. This in wedding photography, portrait processing production is very useful, and remove the part of the portrait, not satisfied with beautification processing, get let a person very satisfactory results. Image synthesis is will a few image through layer operation, tools application of intact, transmit definite synthesis of meaning images, which is a sure way of fine arts design. Photoshop provide drawing tools let foreign image and creative good fusion, the synthesis of possible make the image is perfect. School colour in photoshop with power is one of the functions of deep, the image can be quickly on the color rendition, color slants adjustment and correction, also can be in different colors to switch to meet in different areas such as web image design, printing and multimedia application. Special effects production in photoshop mainly by filter, passage of comprehensive application tools and finish. Including image effects of creative and special effects words such as paintings, making relief, gypsum paintings, drawings, etc commonly used traditional arts skills can be completed by photoshop effects. And all sorts of effects of production are

material_studio_中文版帮助手册

欢迎 欢迎使用Materials Studio Materials Studio是一个采用服务器/客户机模式的软件环境,它为你的PC机带来世界最先进的材料模拟和建模技术。 Materials Studio使你能够容易地创建并研究分子模型或材料结构,使用极好的制图能力来显示结果。与其它标准PC软件整合的工具使得容易共享这些数据。 Materials Studio的服务器/客户机结构使得你的Windows NT/2000/XP,Linux和UNIX服务器可以运行复杂的计算,并把结果直接返回你的桌面。 Materials Studio采用材料模拟中领先的十分有效并广泛应用的模拟方法。Accelry’s的多范围的软件结合成一个集量子力学、分子力学、介观模型、分析工具模拟和统计相关为一体容易使用的建模环境。卓越的建立结构和可视化能力和分析、显示科学数据的工具支持了这些技术。 无论是使用高级的运算方法,还是简单地利用Materials Studio增强你的报告或演讲,你都可以感到自己是在用的一个优秀的世界级材料科学与化学计算软件系统。 易用性与灵活性 Materials Studio可以在Windows 98,Me,NT,2000和XP下运行。用户界面符合微软标准,你可以交互控制三维图形模型、通过简单的对话框建立运算任务并分析结果,这一切对Windows用户都很熟悉。 Materials Studio的中心模块是Materials Visualizer。它可以容易地建立和处理图形模型,包括有机无机晶体、高聚物、非晶态材料、表面和层状结构。Materials Visualizer 也管理、显示并分析文本、图形和表格格式的数据,支持与其它字处理、电子表格和演示软件的数据交换。 Materials Studio是一个模块化的环境。每种模块提供不同的结构确定、性质预测或模拟方法。你可以选择符合你要求的模块与Materials Visualizer组成一个无缝的环境。你也可以把Materials Visualizer作为一个单独的建模和分子图形的软件包来运行。 如果你安装了Materials Studio的其它模块,后台运算既可以运行在本机,也可以通过网络运行在远程主机上。这取决于你建立运算时的选择和运算要求。Materials Studio的客户机/服务器模式支持服务器端运行在Windows NT/2000/XP,Linux或UNIX下,使得你可以最大化利用计算资源。 效率和交流 所以的研究人员都可以从Materials Studio强大功能中获益。这份文档的“演示”部分给出了一些简单的分子和材料的模型。这能使你获得对材料的更好的理解并能创建优秀的图形。与其它Windows软件的协同工作使得能容易地拷贝粘贴这些图形到其它文档。结构和性质的数据能容易地从电子表格和数据库中导入导出。Materials Studio帮助你显示和共享数据。Materials Visualizer也可以安装在研究部门、生产部门、

图像处理中常用英文词解释

Algebraic operation 代数运算一种图像处理运算,包括两幅图像对应像素的和、差、积、商。 Aliasing 走样(混叠)当图像像素间距和图像细节相比太大时产生的一种人工痕迹。Arc 弧图的一部分;表示一曲线一段的相连的像素集合。 Binary image 二值图像只有两级灰度的数字图像(通常为0和1,黑和白) Blur 模糊由于散焦、低通滤波、摄像机运动等引起的图像清晰度的下降。 Border 边框一副图像的首、末行或列。 Boundary chain code 边界链码定义一个物体边界的方向序列。 Boundary pixel 边界像素至少和一个背景像素相邻接的内部像素(比较:外部像素、内部像素) Boundary tracking 边界跟踪一种图像分割技术,通过沿弧从一个像素顺序探索到下一个像素将弧检测出。 Brightness 亮度和图像一个点相关的值,表示从该点的物体发射或放射的光的量。 Change detection 变化检测通过相减等操作将两幅匹准图像的像素加以比较从而检测出其中物体差别的技术。 Class 类见模或类 Closed curve 封闭曲线一条首尾点处于同一位置的曲线。 Cluster 聚类、集群在空间(如在特征空间)中位置接近的点的集合。 Cluster analysis 聚类分析在空间中对聚类的检测,度量和描述。 Concave 凹的物体是凹的是指至少存在两个物体内部的点,其连线不能完全包含在物体内部(反义词为凸) Connected 连通的 Contour encoding 轮廓编码对具有均匀灰度的区域,只将其边界进行编码的一种图像压缩技术。 Contrast 对比度物体平均亮度(或灰度)与其周围背景的差别程度 Contrast stretch 对比度扩展一种线性的灰度变换 Convex 凸的物体是凸的是指连接物体内部任意两点的直线均落在物体内部。Convolution 卷积一种将两个函数组合成第三个函数的运算,卷积刻画了线性移不变系统的运算。 Corrvolution kernel 卷积核1,用于数字图像卷积滤波的二维数字阵列,2,与图像或信号卷积的函数。 Curve 曲线1,空间的一条连续路径,2 表示一路径的像素集合(见弧、封闭曲线)。 Deblurring 去模糊1一种降低图像模糊,锐化图像细节的运算。2 消除或降低图像的模糊,通常是图像复原或重构的一个步骤。 Decision rule 决策规则在模式识别中,用以将图像中物体赋以一定量的规则或算法,这种赋值是以对物体特征度量为基础的。 Digital image 数字图像 1 表示景物图像的整数阵列,2 一个二维或更高维的采样并量化的函数,它由相同维数的连续图像产生,3 在矩形(或其他)网络上采样一连续函数,并才采样点上将值量化后的阵列。 Digital image processing 数字图像处理对图像的数字化处理;由计算机对图片信息进

material_studio个人经验讲解

Materials Studio是Accelrys专为材料科学领域开发的可运行于PC机上的新一代材料计算软件,可帮助研究人员解决当今化学及材料工业中的许多重要问题。Materials Studio软件采用Client/Server结构,客户端可以是Windows 98、2000或NT系统,计算服务器可以是本机的Windows 2000或NT,也可以是网络上的Windows 2000、Windows NT、Linux 或UNIX系统。使得任何的材料研究人员可以轻易获得与世界一流研究机构相一致的材料模拟能力。Materials Studio是ACCELRYS 公司专门为材料科学领域研究者所涉及的一款可运行在PC上的模拟软件。他可以帮助你解决当今化学、材料工业中的一系列重要问题。支持Windows98、NT、Unix以及Linux等多种操作平台的Materials Studio使化学及材料科学的研究者们能更方便的建立三维分子模型,深入的分析有机、无机晶体、无定形材料以及聚合物。 任何一个研究者,无论他是否是计算机方面的专家,都能充分享用该软件所使用的高新技术,他所生成的高质量的图片能使你的讲演和报告更引人入胜。同时他还能处理各种不同来源的图形、文本以及数据表格。 多种先进算法的综合运用使Material Studio成为一个强有力的模拟工具。无论是性质预测、聚合物建模还是X射线衍射模拟,我们都可以通过一些简单易学的操作来得到切实可靠的数据。灵活方便的Client-Server结构还是的计算机可以在网络中任何一台装有NT、Linux或Unix操作系统的计算机上进行,从而最大限度的运用了网络资源。 ACCELRYS的软件使任何的研究者都能达到和世界一流工业研究部门相一致的材料模拟的能力。模拟的内容囊括了催化剂、聚合物、固体化学、结晶学、晶粉衍射以及材料特性等材料科学研究领域的主要课题。 Materials Studio采用了大家非常熟悉Microsoft标准用户界面,它允许你通过各种控制面板直接对计算参数和计算结构进行设置和分析。模块简介:基本环境 MS.Materials Visualizer 分子力学与分子动力学 MS.DISCOVER https://www.wendangku.net/doc/c716707970.html,PASS MS.Amorphous Cell MS.Forcite MS.Forcite Plus MS.GULP MS.Equilibria MS.Sorption晶体、结晶与X射线衍射 MS.Polymorph Predictor MS.Morphology MS.X-Cell MS.Reflex MS.Reflex Plus MS.Reflex QPA量子力学 MS.Dmol3 MS.CASTEP MS.NMR CASTEP MS.VAMP高分子与介观模拟 MS.Synthia

materials studio介绍资料和案例的应用

新一代材料模拟软件 Materials Studio Accelrys材料科学软件的主要应用领域包括: 固体物理及表面科学 催化、分离与化学反应 高分子及软材料 纳米材料 材料表征与仪器分析 晶体与结晶 QSAR (定量构效关系)与配方设计 Accelrys(美国)公司是世界领先的计算科学公司,是一系列用于科学数据的挖掘、整合、分析、模建与模拟、管理和提交交互式报告的智能软件的开发者,是目前全球范围内唯一能够提供分子模拟、材料设计、化学信息学和生物信息学全面解决方案和相关服务的软件供应商,所提供的全面解决方案和科技服务满足了当今全球领先的研究和开发机构的要求。 Accelrys材料科学软件产品提供了全面和完善的模拟环境,可以帮助研究者构建、显示和分析分子、固体、表面和界面的结构模型,并研究、预测材料的结构与相关性质。Accelrys的软件是高度模块化的集成产品,用户可以自由定制、购买自己的软件系统,以满足研究工作的不同需要。 Accelrys软件用于材料科学研究的主要产品是Materials Studio分子模拟软件,它可以运行在台式机、各类型服务器和计算集群等硬件平台上。Materials Studio分子模拟软件广泛应用在石油、化工、环境、能源、制药、电子、食品、航空航天和汽车等工业领域和教育科研部门;这些领域中具有较大影响的跨国公司及世界著名的高校、科研院所等研究机构几乎都是Accelrys产品的用户。 Materials Studio分子模拟软件采用了先进的模拟计算思想和方法,如量子力学(QM)、线性标度量子力学(Linear Scaling QM)、杂化量子力学分子力学(QM/MM)、分子力学(MM)、分子动力学(MD)、蒙特卡洛(MC)、介观动力学(MesoDyn)和耗散粒子动力学(DPD)、统计方法QSAR(Quantitative Structure-Activity Relationship )等多种先进算法和X射线衍射分析等仪器分析方法;模拟的内容包括了催化剂、聚合物、固体及表面、界面、晶体与衍射、化学反应等材料和化学研究领域的主要课题。 Materials Studio分子模拟软件支持32与64位Windows和Linux操作平台,而且界面非常友好、操作简便,使化学及材料科学的研究者们能更方便地建立三维结构模型,并对各种小分子、晶体、无定型以及高分子材料的性质及相关过程进行深入的研究,得到切实可靠的数据。 Materials Studio软件使任何研究者都能得到和世界一流研究部门相一致的材料模拟技术。

materialstudio使用经验总结

materialstudio 使用经验总结 关于K 点 1.应当使用多少个k 网格? 很难一般地回答,只能给出一般建议。注意:一定要检查k 网格,首先用较粗糙的网格计算, 接下来用精细的网格计算。通过比较两次的结果, 决定选用较粗糙的网格, 或是继续进行更 精细网格的计算, 直到达到收敛。金属体系需要精细的网格, 绝缘体使用很少的k 点通常就 可以。小单胞需要精细格点, 大单胞很可能不需要。因此: 单位晶胞内原子数很多(比如 40-60个)的绝缘体,可能仅需要一个(移动后的)k点。另一方面,面心立方的铝可能需 要上万个k点以获得好的DOS对于孤立原子或分子的超晶胞,仅需要在 Gamm点计算。对 于表面(层面)的超晶胞计算,仅需要(垂直于表面)z方向上有1个k点。甚至可以增加 晶格参数c,这样即使对精细格点,沿z方向上也只产生一个k点(产生k 点后, 不要忘记 再把 c 改回)。

2.当体系没有出现时间反演对称操作时, 是否加入? 大多数情况下的回答是“是” , 只有包含自旋- 轨道耦合的自旋极化(磁性)计算除外。这 时, 时间反演对称性被破坏(+k 和-k 的本征值可能不同), 因此决不能加入时间反演对称性。 3.是否移动k 网格?(只对某些格子类型有效) “移动” k网格意味着把所有产生的k点增加x,x,x,把那些位于高对称点(或线)上的k 点移动到权重更大的一般点上。通过这种方法(也即众所周知的“特殊k 点方法” )可以产 生等密度的,k 点较少的网格。通常建议移动。只有一点注意: 当对半导体的带隙感兴趣时 (通常位于Gamma,X或BZ边界上的其它点),使用移动的网格将不会得到这些高对称性 的点,因此得到的带隙和预期结果相比或大或小。这个问题的解决:用移动的网格做SCF 循环,但对DOS计算,改用精细的未移动网格。 关于k 空间布点的问题, 建议参阅以下文献Phys.Rev.B 49,16223 1994 如何构建缺陷晶体结构 晶体结构改成P1, 然后去掉想抹去的原子就可以了 在ms中如何做空穴 对于金属缺陷, 是直接剪切一个原子?

图像处理英文翻译

数字图像处理英文翻译 (Matlab帮助信息简介) xxxxxxxxx xxx Introduction MATLAB is a high-level technical computing language and interactive environment for algorithm development, data visualization, data analysis, and numeric computation. Using the MATLAB product, you can solve technical computing problems faster than with traditional programming languages, such as C, C++, and Fortran. You can use MATLAB in a wide range of applications, including signal and image processing, communications, control design, test and measurement, financial modeling and analysis, and computational biology. Add-on toolboxes (collections of special-purpose MATLAB functions, available separately) extend the MATLAB environment to solve particular classes of problems in these application areas. The MATLAB system consists of these main parts: Desktop Tools and Development Environment This part of MATLAB is the set of tools and facilities that help you use and become more productive with MATLAB functions and files. Many of these tools are graphical user interfaces. It includes: the

Materials Studio介绍

Materials Studio专门为材料科学模拟所设计,能方便的建立 3D分子模型,深入分析有机、无机晶体、无定形材料以及聚合物,可以在催化剂、聚合物、固体化学、结晶学、晶粉衍射以及材料特性等材料科学研究领域进行性质预测、聚合物建模和X射线衍射模拟,操作灵活方便,并且最大限度地运用网络资源。DISCOVER:分子力学和动力学程序。基于力场计算出最低能量构型、分子体系的结构和动力学轨迹等。 COMPASS:对凝聚态材料进行原子水平模拟的力场。可以在很大的温度、压力范围内精确地预测孤立体系或凝聚态体系中各种分子的结构、构象、振动以及热物理性质。 Reflex:模拟晶体材料的X光、中子以及电子等多种粉末衍射图谱。 DMol3:密度泛函程序,可用于研究均相催化、多相催化、分子反应性、分子结构等,也可预测溶解度、蒸气压、配分函数、溶解热、混合热等性质。 CASTEP:量子力学程序,应用于陶瓷、半导体、金属等多种材料,可研究晶体材料的性质、表面和表面重构的性质、表面化学、电子结构(能带及态密度)、晶体的光学性质、点缺陷性质(如空位、间隙或取代掺杂)、延展缺陷(晶粒间界、位错)、体系的三维电荷密度及波函数等。Materials Studio 3.1版加入的NMR CASTEP模块能够可靠地模拟任何材料的NMR化学屏蔽张量和四极耦合常数。 VAMP:半经验的分子轨道程序,适用于有机和无机的分子体系。

1. CASTEP可以使用超软赝势(USP)计算导电体系 2. DMol3可进行周期性模型的COSMO溶剂化计算 3. Nanotechnology Consortium使用户可以对大尺度体系进行量子力学模拟研究 4. 加入线性标度DFT程序ONETEP,和QM/MM程序QMERA Materials Studio 4.2新增功能: 1. GULP增强:用立场工具创建自己的力场;计算光学特性(反射率,折射率,介电常数) 2. 到Gaussian 03的接口:设定和提交任务;监视计算;显示分子,分子轨道和电荷密度;与Materials Studio的其它模块交换结构,电荷和Hessian。 3. QMERA支持“加成嵌入”QM/MM方法,用于考虑极化影响;优化过渡态。 4. ONETEP:改善了对重元素的支持。 Materials Studio 4.3新增功能: 1. ONETEP:计算结构,能量,电荷密度,分子轨道,以及态密度。对复杂体系执行结构优化和过渡态搜索。 2. CASTEP增强:用LDA+U改善开壳层体系带隙的描述。可以用标准的Hubbard U参数,也可以用自己优化的参数。

MaterialsStudio教程

目录 第0章绪论 (1) 0.1 计算机材料设计的概念 (1) 0.2 计算机材料设计的发展 (1) 0.3 计算机材料设计的途径 (2) 第1章快速启动教程 (1) 1.1 创建项目(Creating a project) (1) 1.2 打开、浏览3D文档 (2) 1.3 绘制苯甲酰胺(benzamide)分子 (4) 1.4 用学习表文档进行浏览和工作 (8) 1.5 研究分子晶体:尿素 (11) 1.6 建立α-quartz晶体 (12) 1.7 建立聚甲基丙烯酸甲酯(methyl methacrylate) (14) 1.8 保存项目、结束本教程 (15) 第2章VISUALIZER 教程 (16) 2.1 项目管理 (16) 2.2 绘制简单的分子 (21) 2.3 绘制卟啉(porphyrin) (30) 2.4 绘制有机金属结构 (36) 2.5 覆盖和对齐分子 (43) 2.6 精确定位和移动原子 (46) 2.7 在表面对接分子 (49) 2.8 使用polymer builder (54) 2.9 使用layer builder (65) 2.10 使用crystal builder (72) 2.11 建立中尺度分子 (81) 2.12 用Analog Builder枚举库 (84) 2.13 用等位面(isosurfaces)和切片工作(slices) (88) 2.14 域隔离和分析 (94) 第3章ADSORPTION LOCATOR、BLENDS教程 (98) 3.1 用Adsorption Locator决定SO2在Ni(111)晶面上的位置 (98) 3.2 共混聚合物相容性筛选 (101) 第4章AMORPHOUS CELL教程 (108)

Material studio软件介绍

单击此处编辑母版标题样式
单击此处编辑母版文本样式 第二级 第三级 第四级 第五级
Materials Studio分子模拟软件
Version 2011
Copyright ?2010, Neotrident Technology Ltd. All rights reserved.

虚拟 “实验”(分子模拟技术)
C R E A T V I T Y
决定依据
单击此处编辑母版标题样式
单击此处编辑母版副标题样式
虚拟设计
表征材料结构,以及与结构相关的性质 —— 解释 设计材料结构,以及与结构相关的性质 —— 预测

Materials Studio是整合的计算模拟平台
? 可兼顾科研和教学需求 ? 可在大规模机群上进行并行计算 ? 客户端-服务器 计算方式 – Windows Linux Windows, – 最大限度的使用已有IT资源 – – – – – – – – DFT及半经验量子力学 线形标度量子力学 分子力学 QM/MM方法 介观模拟 统计方法 分析仪器模拟 …… ? 全面的应用领域 - 固体物理与表面化学 - 催化、分离与化学反应 - 半导体功能材料 - 金属与合金材料 - 特种陶瓷材料 - 高分子与软材料 - 纳米材料 - 材料表征与仪器分析 - 晶体与结晶 - 构效关系研究与配方设计 - ……
单击此处编辑母版标题样式 ? 包含多种计算方法
单击此处编辑母版副标题样式

Materials Studio?
Menu Toolbar
单击此处编辑母版标题样式 Property
View
单击此处编辑母版副标题样式
Job s us status
Project

图像处理外文翻译

杭州电子科技大学 毕业设计(论文)外文文献翻译 毕业设计(论文)题目基于遗传算法的自动图像分割软件开发 翻译(1)题目Image Segmentation by Using Threshold Techniques 翻译(2)题目 A Review on Otsu Image Segmentation Algorithm 学院计算机学院 专业计算机科学与技术 姓名刘xx 班级11xxxxxx 学号1115xxxx 指导教师孔xx

使用阈值技术的图像分割 1 摘要 本文试图通过5阈值法作为平均法,P-tile算法,直方图相关技术(HDT),边缘最大化技术(EMT)和可视化技术进行了分割图像技术的研究,彼此比较从而选择合的阈值分割图像的最佳技术。这些技术适用于三个卫星图像选择作为阈值分割图像的基本猜测。 关键词:图像分割,阈值,自动阈值 1 引言 分割算法是基于不连续性和相似性这两个基本属性之一的强度值。第一类是基于在强度的突然变化,如在图像的边缘进行分区的图像。第二类是根据预定义标准基于分割的图像转换成类似的区域。直方图阈值的方法属于这一类。本文研究第二类(阈值技术)在这种情况下,通过这项课题可以给予这些研究简要介绍。阈分割技术可分为三个不同的类: 首先局部技术基于像素和它们临近地区的局部性质。其次采用全局技术分割图像可以获得图像的全局信息(通过使用图像直方图,例如;全局纹理属性)。并且拆分,合并,生长技术,为了获得良好的分割效果同时使用的同质化和几何近似的概念。最后的图像分割,在图像分析的领域中,常用于将像素划分成区域,以确定一个图像的组成[1][2]。 他们提出了一种二维(2-D)的直方图基于多分辨率分析(MRA)的自适应阈值的方法,降低了计算的二维直方图的复杂而提高了多分辨率阈值法的搜索精度。这样的方法源于通过灰度级和灵活性的空间相关性的多分辨率阈值分割方法中的阈值的寻找以及效率由二维直方图阈值分割方法所取得的非凡分割效果。实验的结果表明,这种方法可以得到的分割结果与详尽二维直方图方法相类似,而计算复杂度与分辨率等级的增加而呈指数下降[3]。 图像的阈值问题,被视为在图像处理的一个重要问题,它不仅可以减少图像数据,同时也奠定了多目标识别和图像认知提供了良好的基础。全局阈值分割和局部阈值的字符图像分割进行了分析。一个新的阈值统计迭代算法,提出要克服的直接阈值,针对一些光照不对称和明显的缺陷,或者更大的数字比例在各种各样的背景灰度图像中。统计迭代阈值分割,基于图像灰度直方图和高斯分布的统计,获得统计迭代法理论表达和最值得阈值法和步骤。航空图像通过分别使用统计迭代算法,直方图技术和自适应方法进行阈值分割。比较三种阈值结果,它表明统计迭代方法大大提高了图像分割的抗噪能力,并且有更好的图像结果,并且不容易在阈值方法中分段[4]。 模糊C均值改进算法和遥感图像分割策略,可以提供较少的迭代次数收敛到全局1Salem Saleh Al-amri1, N.V. Kalyankar2 and Khamitkar S.D 3JOURNAL OF COMPUTING,

Materials studio简介

Materials studio简介 1、诞生背景美国Accelrys公司的前身为四家世界领先的科学软件公司――美国Molecular Simulations Inc.(MSI)公司、Genetics Computer Group(GCG)公司、英国Synopsys Scient ific系统公司以及Oxford Molecular Group(OMG)公司,由这四家软件公司于2001年6月1日合并组建的Accelrys公司,是目前全球范围内唯一能够提供分子模拟、材料设计以及化学信息学和生物信息学全面解决方案和相关服务的软件供应商。 Accelrys材料科学软件产品提供了全面完善的模拟环境,可以帮助研究者构建、显示和分析分子、固体及表面的结构模型,并研究、预测材料的相关性质。Accelrys的软件是高度模块化的集成产品,用户可以自由定制、购买自己的软件系统,以满足研究工作的不同需要。Accelrys软件用于材料科学研究的主要产品包括运行于UNIX工作站系统上的Cerius2软件,以及全新开发的基于PC平台的Materials Studio软件。Accelrys材料科学软件被广泛应用于石化、化工、制药、食品、石油、电子、汽车和航空航天等工业及教育研究部门,在上述领域中具有较大影响的世界各主要跨国公司及著名研究机构几乎都是Accelrys产品的用户。 2、软件概况 Materials Studio是专门为材料科学领域研究者开发的一款可运行在PC上的模拟软件。它可以帮助你解决当今化学、材料工业中的一系列重要问题。支持Windows 98、2000、NT、Unix以及Linux等多种操作平台的Materials Studio使化学及材料科学的研究者们能更方便地建立三维结构模型,并对各种晶体、无定型以及高分子材料的性质及相关过程进行深入的研究。 多种先进算法的综合应用使Materials Studio成为一个强有力的模拟工具。无论构型优化、性质预测和X射线衍射分析,以及复杂的动力学模拟和量子力学计算,我们都可以通过一些简单易学的操作来得到切实可靠的数据。 Materials Studio软件采用灵活的Client-Server结构。其核心模块Visualizer运行于客户端PC,支持的操作系统包括Windows 98、2000、NT;计算模块(如Discover,Amorphous,Equilibria,DMol3,CASTEP等)运行于服务器端,支持的系统包括Windows2000、NT、SGIIRIX以及Red Hat Linux。浮动许可(Floating License)机制允许用户将计算作业提交到网络上的任何一台服务器上,并将结果返回到客户端进行分析,从而最大限度地利用了网络资源。 任何一个研究者,无论是否是计算机方面的专家,都能充分享用Materials Studio软件所带来的先进技术。Materials Studio生成的结构、图表及视频片断等数据可以及时地与其它PC软件共享,方便与其他同事交流,并能使你的讲演和报告更加引人入胜。 Materials Studio软件能使任何研究者达到与世界一流研究部门相一致的材料模拟的能力。模拟的内容包括了催化剂、聚合物、固体及表面、晶体与衍射、化学反应等材料和化学研究领域的主要课题。 3、模块简介 Materials Studio采用了大家非常熟悉的Microsoft标准用户界面,允许用户通过各种控制面板直接对计算参数和计算结果进行设置和分析。目前,Materials Studio软件包括如下功能模块: Materials Visualizer: 提供了搭建分子、晶体及高分子材料结构模型所需要的所有工具,可以操作、观察及分析结构模型,处理图表、表格或文本等形式的数据,并提供软件的基本环境和分析工具以及支持Materials Studio的其他产品。是Materials Studio产品系列的核心模块。

图像处理 毕业设计 英文翻译

本科毕业设计外文翻译 专业名称测控技术与仪器 学生学号2010302302 学生姓名汪杰 指导教师何鹏举 完成时间2014年4月

本科毕业设计英文翻译 指导教师评阅意见 学生姓名:汪杰班级:090510卓越得分: 请指导教师用红笔在译文中直接进行批改,并就以下几方面填写评阅意见,给出综合得分(满分按100分计)。 1、专业术语、词汇翻译的准确性; 2、翻译材料是否与原文的内容一致; 3、翻译材料字数是否符合要求; 4、语句是否通顺,是否符合中文表达习惯。 中文译文: 一个自定义图像处理系统的高级设计工具 摘要——实时图像处理是一种应用在各种工程领域的计算密集型任务。在一些图像处理应用中,庞大的计算能力致力于图像增强操作、基本分割和进一步分析感兴趣的区域的识别。这种类型的前端过程可以被自定义数据流处理器紧密耦合到一个图像传感器来有效地完成。本文提出一种视觉设计环境,它支持自定义数据流处理器的实时图像分析应用程序的高级设计。该工具嵌入在Matlab/Simulink,系统建模是通过使用一个可以实现共同的低级图像处理操作的大型库。功能验证是在逐帧基础上,被Simulink的模拟工具模型有效的执行,使用Matlab提供的功能——图像处理工具箱。可合成的RTL(Real Time Logistics 实时物流)模型的自动生成保证了系统的逻辑实现,在用户和目标可重构设计强加的约束下,系统符合高级模型验证。 1.简介 一些工程领域需要实时图像处理系统,例如工业视觉检查系统。遵守实时要求的紧时间的必要条件是强大的计算能力,在一些情况下,不能通过传统的、低成本的处理器来完成。这特别适用于嵌入式系统,这里并行处理各种流程很重要,物理空间的实时需求和限制以及能量消耗可以自定义计算系统,特别是

手把手教你用Materials studio

手把手教你用Materials Studio计算碳纳米管的能带结构 Materials Studio是Accelrys专为材料科学领域开发的可运行于PC机上的新一代材料计算软件,可帮助研究人员解决当今化学及材料工业中的许多重要问题。Material s Studio软件采用Client/Server结构,使得任何的材料研究人员可以轻易获得与世界一流研究机构相一致的材料模拟能力。在这里,我们将介绍如何用Materials Studio 中的Dmol模块计算碳纳米管的能带结构。Dmol是Materials Studio中自带的密度泛函(DFT)量子力学程序,可计算能带结构、态密度。基于内坐标的算法强健高效,支持并行计算。MS4.0版本中加入了更方便的自旋极化设置,可用于计算磁性体系。4.0版本起还可以进行动力学计算。 碳纳米管是1991年发现的一种新型碳结构,它是由碳原子形成的石磨烯片层卷成的无缝、中空的管体。一般可分为单壁纳米碳管和多壁纳米碳管。纳米碳管作为新型的碳材料,其应用具有越来越广阔的天地。比如说由碳纳米管组成的纤维,具有一般材料所不具有抗拉升能力;金属的碳纳米管,可以被用来作为场效应管之间的连接电路;碳纳米管还可以用来做场效应发射的电极等。所有的这些应用,都基于对碳纳米管本身的力学和电学性质的了解。 下面的例子介绍如何用Materials Studio 4.0构造不同性质的碳纳米管,以及如何用Dmol模块计算碳纳米管的能带结构。形象地说,碳纳米管可以想象为将一个石墨层按照一定的法则卷曲后得到。下图中的OA是碳纳米管的Chiral Vector,也就是将石墨层沿着OA方向卷曲,将O点和A点重叠。OB是碳纳米管沿轴向的平移矢量。碳纳米管通常由(n,m)来表征,其意义就是OA=n a1+m a2。下图是个(4,1)的碳纳米管,图中的θ是碳纳米管的chiral angle,其取值范围在0到30度之间。 我们可以通过Materials Studio中的构建碳纳米管的模块来得到任意的(n,m)的碳纳米管。具体过程是选择菜单中的Build->Build Nanostructure->Single-Wall Nanot ube,然后在弹出来的对话框中选择你所需要的碳纳米管的(n,m)的具体数值,在此例子中,我们选择n=8,m=0,注意,我们还选中periodic nanotube的选项,因为我们将进

相关文档
相关文档 最新文档