PTN开局试验-6300-2脚本

1.删除配置文件
enable
zxr10 //enable 密码
dir
cd cfg
dir
del startrun.*
cd..
cd db
del *.db
reload

2.配置VLAN
enable
zxr10 //enable 密码
show arp
show ip route
config ter
username who password who privilege 15
username zte password ecc privilege 15
username ptn password ptn privilege 1
show username

hostname 6300-2
multi-user configure
snmp-server trap-source 2.2.2.2
snmp-server view allview internet include
snmp-server community public view AllView ro
snmp-server community private view AllView rw
snmp-server host 200.10.10.10 trap version 2c public udp-port 162
snmp-server enable trap SNMP
snmp-server enable trap VPN
snmp-server enable trap BGP
snmp-server enable trap OSPF
snmp-server enable trap RMON
snmp-server enable trap STALARM
snmp-server packetsize ?

snmp-server packetsize 8192
logging on
logging trap-enable inform
clock timezone BEIJING 8

inter loopback1
ip add 2.2.2.2 255.255.255.255
exit

tmpls LSR-ID loopback1

vlan 4091
exit
vlan 4092
exit

inter vlan 4091
ip add 192.168.1.2 255.255.255.0
exit
inter vlan 4092
ip add 192.168.2.1 255.255.255.0
exit


inter xgei_12/1
sw mode trunk
sw trunk vlan 4091
sw trunk native vlan 4091
exit

inter xgei_11/1
sw mode trunk
sw trunk vlan 4092
sw trunk native 4092
exit

no tmpls oam disable //启用OAM 6300-2非网管网元，是否需启用OAM？？？？？？？？？

3.配置OSPF路由脚本，使全网可路由
router ospf 1
network 2.2.2.2 0.0.0.0 area 0
net 192.168.1.0 0.0.0.255 area 0
net 192.168.2.0 0.0.0.255 area 0
exit
exit
show vlan
show ip route
show arp
write