任意波形信号发生器的设计外文文献

任意波形信号发生器的设计外文文献

原文

Design of An arbitrary waveform signal generator

Abstract

Signal generator plays a very important role in communication, electronic measuring instruments, electronic circuits, automatic control, radar and other electronic systems. Direct Digital Synthesis (DDS) technology can easily control the frequency of the signal for direct synthesis of waveforms. This paper designed a signal generator with the amplitude and frequency modulation by using AD9850 as frequency synthesizer and AT89S52 single chip microcomputer (SCM) as the core. Detailed design principle and idea are discussed. AD9850 of the DDS chip is used to generate the waveform. The frequency data of external input can be transformed to frequency phase control words of chip by simple parallel or serial communication interface with the single chip microcomputer. Amplitude modulation is realized by the AD7520 chip. The system is not only simple in structure, easy to implement, but also convenient and cheap. It has a theoretical and practical value.

1.Introduction

Signal generator can be used as a signal source, which provides a known test signal to the circuit. It can be used to measure parameters of interest. In a variety of experimental test applications and processing, the signal source as the excitation source can simulate a variety of test signals, providing the practical needs to the circuit [1].

Signal generator play a very important role in communications, electronic measuring instruments, electronic circuits, automatic control, radar and other electronic systems. With the rapid development of digital technology, there has been high-precision digital-analog converter,digital control method by using a standard reference frequency generated by multiple frequency technology, which is the DDS technology [2]. Arbitrary waveform signal generator can meet the complex fields, user-defined signal, and the combination of computer technology and make it more accurate and stable. With the current development of electronic technology, the signal generator has a great application.

2. System

We designed a signal generator, which can produce several arbitrary waveforms. We

can control the size of amplitude and frequency, providing a variety of signals to the test circuit.

Using AT89S52 micro controller, AD9850 (DDS) and digital-analog conversion technology, we complete hardware and software design. Through the keyboard input module, we can adjust the amplitude and frequency of the waveform. Waveform generation process is achieved by the micro controller. So theoretically we can write a program to generate any desired waveform. SCM generates digital signal. In order to obtain the desired waveform, we should have a single chip changing digital signals into analog signals.

AD9850 of the DDS chip is used to generate the waveform. The frequency data of external input can be transformed to frequency phase control words of chip by simple parallel or serial communication interface with the single chip microcomputer. Amplitude modulation is realized by the AD7520 chip. The system design is shown in Fig. 1.

The system uses SCM to control DDS chip AD9850 which produce the required signal for test instrument. SCM controls the multiplexer. The square wave or sine is DA converter AD7520's voltage reference signal. AD7520's output signal, after conditioning and amplification, is a 15V peak frequency signal. After complementary push-pull amplifier circuit, we finally get the necessary frequency signals. To ensure the signal stability peak and frequency when the load changes, the amplifier circuit in the amplifier outputs are added with the appropriate negative feedback.

3.Hardware

The circuit design is mainly two aspects including hardware and software design. The hardware part is the signal generation circuit, MCU control circuit, amplitude control circuit and display circuit. Software is mainly composed of main program and interrupt routines.

The core controller is AT89S52. ATMEL AT89S52 produced by the U.S. is a low-voltage, high performance CMOS 8 bit micro controller chip with repeated contains 8k byte erasable read-only Flash program memory and 256 bytes of random access data memory. AT89S52 can operate down to 0Hz static logic to support two kinds of software-selectable power-saving mode [3].

In this design, SCM is the most important core component. Its work time is 12MHz.

The internal flash stores the working procedures. Through the keyboard input, the circuit can know what is required to generate the waveform, the amplitude and frequency. We can also adjust any waveform of amplitude and frequency.

Fig. 1. The system scheme

In this system, we use an independent-type keyboard. The design uses a matrix keyboard, using the software scan button access to key information as necessary and achieving with software programming. This can save hardware resources, simplifying circuit design. By the matrix keyboard we can easily set on a variety of micro controllers.

In this design, P0 port is connected with the LCD display, AD9850 and the AD7520 IC chip is for data transmission. Because the original I/O ports are not enough, we need micro controller chip on the expansion of other peripheral interfaces. In this circuit, we use the 8255 chip, which is a programmable parallel I/O interface chip.

The highly integrated frequency synthesizer AD9850 is a typical use of DDS technology products. AD9850 uses advanced CMOS process. Its power supply is only 155mw at 3.3V. The extended industrial temperature range is from -40 to +80 centigrade degree with 28-pin Shrink Small Outline surface mount form.

AD9850 DDS system includes programmable and high-speed comparators, all-digital programming to achieve the control of frequency synthesis. AD9850 can produce a frequency and phase is programmable control of the analog sine wave output when connected to the precision clock and the frequency of write. The sine wave frequency signal can be directly used as the source or the internal conversion of high-speed comparator for the square wave output. In the 125MHz clock, the 32-bit frequency control word can AD9850 output frequency resolution of 0.0291Hz [4].

In this circuit design, the control signal input from the D0-D7 into the register. In

rising edge of W_CLK (P3.0) the first byte is loaded and the pointer moves to the next input register. A continuous 5 rising edge, it stops working. Then when the rising edge FQ_UD (P3.1), the data is loaded into the frequency/phase register. At this time the DDS output frequency and phase updates. Then the pointer reset and the circuit waits for the next frequency/phase control word input.

Display Module. Considering the actual situation, we adopt dot matrix LED to realize the display. LCD1602 can display the output waveform frequency, amplitude, and the specific type. LCD1602 and the PA port of 8255 chip are connected. Three terminals RS, RW, E connected the P2.7-P2.5 of micro controller respectively. The software can control the type of waveform display and waveform frequency.

RS is a register choice is to select the data register high, low, the instruction register. RW is the read write signal line, height is read, and write operation is low. When the RS and RW are low, the LCD can be written instruction or display the address. When RS is low and RW is high, the LCD can be read. When RS is low and high-RW, the LCD can be written data. E pin is the energy side. When the E pin is from high to low, the LCD execute commands.

AD9805 outputs constant wave amplitude. We use a D/A converter AD7520 to achieve amplitude adjustment.

The internal resistor network of AD7520 chip is composed of a programmable variable gain amplifier. AD7520 integrates the resistance network of 10 analog switches which are programmable. Internal resistor network with the AD7520 programmable amplifier are used as gain of the circuit [5].

Magnification can be adjusted between 1 to 1024, as long as the change BIT1-BIT10 the corresponding bit changes logic state can control the magnification. When BIT1-BIT10 is 3FFH, the magnification is 1 time, which is 0dB. When 98H, the magnification is10 times, which is 20dB. To realize Programmable gain, we connect PC port of 74LS373 and P2 port of SCM with AD7520 pin BIT1-BIT10. Through program, the micro controller control I/O port output state to complete the programmable gain [5].

The system requires a 5V DC power supply to all circuits. DC power supply is generally composed of power transformer, rectifier, filter circuit and the voltage regulator circuit.

毕业设计外文翻译资料

外文出处： 《Exploiting Software How to Break Code》By Greg Hoglund, Gary McGraw Publisher : Addison Wesley Pub Date : February 17, 2004 ISBN : 0-201-78695-8 译文标题： JDBC接口技术 译文： JDBC是一种可用于执行SQL语句的JavaAPI（ApplicationProgrammingInterface应用程序设计接口）。它由一些Java语言编写的类和界面组成。JDBC为数据库应用开发人员、数据库前台工具开发人员提供了一种标准的应用程序设计接口，使开发人员可以用纯Java语言编写完整的数据库应用程序。 一、ODBC到JDBC的发展历程 说到JDBC，很容易让人联想到另一个十分熟悉的字眼“ODBC”。它们之间有没有联系呢？如果有，那么它们之间又是怎样的关系呢？ ODBC是OpenDatabaseConnectivity的英文简写。它是一种用来在相关或不相关的数据库管理系统（DBMS）中存取数据的，用C语言实现的，标准应用程序数据接口。通过ODBCAPI，应用程序可以存取保存在多种不同数据库管理系统（DBMS）中的数据，而不论每个DBMS使用了何种数据存储格式和编程接口。 1．ODBC的结构模型 ODBC的结构包括四个主要部分：应用程序接口、驱动器管理器、数据库驱动器和数据源。应用程序接口：屏蔽不同的ODBC数据库驱动器之间函数调用的差别，为用户提供统一的SQL编程接口。 驱动器管理器：为应用程序装载数据库驱动器。 数据库驱动器：实现ODBC的函数调用，提供对特定数据源的SQL请求。如果需要，数据库驱动器将修改应用程序的请求，使得请求符合相关的DBMS所支持的文法。 数据源：由用户想要存取的数据以及与它相关的操作系统、DBMS和用于访问DBMS的网络平台组成。 虽然ODBC驱动器管理器的主要目的是加载数据库驱动器，以便ODBC函数调用，但是数据库驱动器本身也执行ODBC函数调用，并与数据库相互配合。因此当应用系统发出调用与数据源进行连接时，数据库驱动器能管理通信协议。当建立起与数据源的连接时，数据库驱动器便能处理应用系统向DBMS发出的请求，对分析或发自数据源的设计进行必要的翻译，并将结果返回给应用系统。 2．JDBC的诞生 自从Java语言于1995年5月正式公布以来，Java风靡全球。出现大量的用java语言编写的程序，其中也包括数据库应用程序。由于没有一个Java语言的API，编程人员不得不在Java程序中加入C语言的ODBC函数调用。这就使很多Java的优秀特性无法充分发挥，比如平台无关性、面向对象特性等。随着越来越多的编程人员对Java语言的日益喜爱，越来越多的公司在Java程序开发上投入的精力日益增加，对java语言接口的访问数据库的API 的要求越来越强烈。也由于ODBC的有其不足之处，比如它并不容易使用，没有面向对象的特性等等，SUN公司决定开发一Java语言为接口的数据库应用程序开发接口。在JDK1．x 版本中，JDBC只是一个可选部件，到了JDK1．1公布时，SQL类包（也就是JDBCAPI）

毕业论文英文参考文献与译文

Inventory management Inventory Control On the so-called "inventory control", many people will interpret it as a "storage management", which is actually a big distortion. The traditional narrow view, mainly for warehouse inventory control of materials for inventory, data processing, storage, distribution, etc., through the implementation of anti-corrosion, temperature and humidity control means, to make the custody of the physical inventory to maintain optimum purposes. This is just a form of inventory control, or can be defined as the physical inventory control. How, then, from a broad perspective to understand inventory control? Inventory control should be related to the company's financial and operational objectives, in particular operating cash flow by optimizing the entire demand and supply chain management processes (DSCM), a reasonable set of ERP control strategy, and supported by appropriate information processing tools, tools to achieved in ensuring the timely delivery of the premise, as far as possible to reduce inventory levels, reducing inventory and obsolescence, the risk of devaluation. In this sense, the physical inventory control to achieve financial goals is just a means to control the entire inventory or just a necessary part; from the perspective of organizational functions, physical inventory control, warehouse management is mainly the responsibility of The broad inventory control is the demand and supply chain management, and the whole company's responsibility. Why until now many people's understanding of inventory control, limited physical inventory control? The following two reasons can not be ignored: First, our enterprises do not attach importance to inventory control. Especially those who benefit relatively good business, as long as there is money on the few people to consider the problem of inventory turnover. Inventory control is simply interpreted as warehouse management, unless the time to spend money, it may have been to see the inventory problem, and see the results are often very simple procurement to buy more, or did not do warehouse departments . Second, ERP misleading. Invoicing software is simple audacity to call it ERP, companies on their so-called ERP can reduce the number of inventory, inventory control, seems to rely on their small software can get. Even as SAP, BAAN ERP world, the field of

土木工程毕业设计外文文献翻译修订版

土木工程毕业设计外文文献翻译修订版 IBMT standardization office【IBMT5AB-IBMT08-IBMT2C-ZZT18】

外文文献翻译 Reinforced Concrete （来自《土木工程英语》） Concrete and reinforced concrete are used as building materials in every country. In many, including the United States and Canada, reinforced concrete is a dominant structural material in engineered construction. The universal nature of reinforced concrete construction stems from the wide availability of reinforcing bars and the constituents of concrete, gravel, sand, and cement, the relatively simple skills required in concrete construction, and the economy of reinforced concrete compared to other forms of construction. Concrete and reinforced concrete are used in bridges, buildings of all sorts underground structures, water tanks, television towers, offshore oil exploration and production structures, dams, and even in ships. Reinforced concrete structures may be cast-in-place concrete, constructed in their final location, or they may be precast concrete produced in a factory and erected at the construction site. Concrete structures may be severe and functional in design, or the shape and layout and be whimsical and artistic. Few other building materials off the architect and engineer such versatility and scope. Concrete is strong in compression but weak in tension. As a result, cracks develop whenever loads, or restrained shrinkage of temperature changes, give rise to tensile stresses in excess of the tensile strength of the concrete. In

软件开发概念和设计方法大学毕业论文外文文献翻译及原文

毕业设计（论文）外文文献翻译 文献、资料中文题目：软件开发概念和设计方法文献、资料英文题目： 文献、资料来源： 文献、资料发表（出版）日期： 院（部）： 专业： 班级： 姓名： 学号： 指导教师： 翻译日期： 2017.02.14

外文资料原文 Software Development Concepts and Design Methodologies During the 1960s, ma inframes and higher level programming languages were applied to man y problems including human resource s yste ms,reservation s yste ms, and manufacturing s yste ms. Computers and software were seen as the cure all for man y bu siness issues were some times applied blindly. S yste ms sometimes failed to solve the problem for which the y were designed for man y reasons including: ?Inability to sufficiently understand complex problems ?Not sufficiently taking into account end-u ser needs, the organizational environ ment, and performance tradeoffs ?Inability to accurately estimate development time and operational costs ?Lack of framework for consistent and regular customer communications At this time, the concept of structured programming, top-down design, stepwise refinement，and modularity e merged. Structured programming is still the most dominant approach to software engineering and is still evo lving. These failures led to the concept of "software engineering" based upon the idea that an engineering-like discipl ine could be applied to software design and develop ment. Software design is a process where the software designer applies techniques and principles to produce a conceptual model that de scribes and defines a solution to a problem. In the beginning, this des ign process has not been well structured and the model does not alwa ys accurately represent the problem of software development. However,design methodologies have been evolving to accommo date changes in technolog y coupled with our increased understanding of development processes. Whereas early desig n methods addressed specific aspects of the

毕业设计(论文)外文文献译文

毕业设计（论文） 外文文献译文及原文 学生：李树森 学号：201006090217 院（系）：电气与信息工程学院 专业：网络工程 指导教师：王立梅 2014年06月10日

JSP的技术发展历史 作者：Kathy Sierra and Bert Bates 来源：Servlet&JSP Java Server Pages(JSP)是一种基于web的脚本编程技术，类似于网景公司的服务器端Java脚本语言—— server-side JavaScript(SSJS)和微软的Active Server Pages(ASP)。与SSJS和ASP相比，JSP具有更好的可扩展性，并且它不专属于任何一家厂商或某一特定的Web服务器。尽管JSP规范是由Sun 公司制定的，但任何厂商都可以在自己的系统上实现JSP。 在Sun正式发布JSP之后，这种新的Web应用开发技术很快引起了人们的关注。JSP为创建高度动态的Web应用提供了一个独特的开发环境。按照Sun的说法，JSP能够适应市场上包括Apache WebServer、IIS4.0在内的85%的服务器产品。 本文将介绍JSP相关的知识，以及JavaBean的相关内容，当然都是比较粗略的介绍其中的基本内容，仅仅起到抛砖引玉的作用，如果读者需要更详细的信息，请参考相应的JSP的书籍。 1.1 概述 JSP(Java Server Pages)是由Sun Microsystems公司倡导、许多公司参与一起建立的一种动态网页技术标准，其在动态网页的建设中有其强大而特别的功能。JSP与Microsoft的ASP技术非常相似。两者都提供在HTML代码中混合某种程序代码、由语言引擎解释执行程序代码的能力。下面我们简单的对它进行介绍。 JSP页面最终会转换成servlet。因而，从根本上，JSP页面能够执行的任何任务都可以用servlet 来完成。然而，这种底层的等同性并不意味着servlet和JSP页面对于所有的情况都等同适用。问题不在于技术的能力，而是二者在便利性、生产率和可维护性上的不同。毕竟，在特定平台上能够用Java 编程语言完成的事情，同样可以用汇编语言来完成，但是选择哪种语言依旧十分重要。 和单独使用servlet相比，JSP提供下述好处： JSP中HTML的编写与维护更为简单。JSP中可以使用常规的HTML：没有额外的反斜杠，没有额外的双引号，也没有暗含的Java语法。 能够使用标准的网站开发工具。即使是那些对JSP一无所知的HTML工具，我们也可以使用，因为它们会忽略JSP标签。 可以对开发团队进行划分。Java程序员可以致力于动态代码。Web开发人员可以将经理集中在表示层上。对于大型的项目，这种划分极为重要。依据开发团队的大小，及项目的复杂程度，可以对静态HTML和动态内容进行弱分离和强分离。 此处的讨论并不是说人们应该放弃使用servlet而仅仅使用JSP。事实上，几乎所有的项目都会同时用到这两种技术。在某些项目中，更适宜选用servlet，而针对项目中的某些请求，我们可能会在MVC构架下组合使用这两项技术。我们总是希望用适当的工具完成相对应的工作，仅仅是servlet并不一定能够胜任所有工作。 1.2 JSP的由来 Sun公司的JSP技术，使Web页面开发人员可以使用HTML或者XML标识来设计和格式化最终

(完整版)建筑外文翻译毕业设计论文

随着我国经济的发展,建筑行业已经朝着多元化方向发展,建筑行业在我国经济发展中起着非常重要的作用。而建筑工程管理工作直接关系到工程的质量、成本管理、人员的安全、企业的经营效益,甚至关系到企业的生死存亡,但是我国建筑工程管理在现阶段存在许多的不足:管理体制不健全。我国大部分的建筑工程为了节约人员开支,减少了建筑工程管理机构的人员数量和质量。管理制度深入性不足。建筑行业的相关管理制度都是由一些著名的建筑行业专家等共同研究制定的,但是在各建筑单位中就只是一张纸,他们也都只是为了应付上级的检查,并不能应用到建筑工程管理上。 在我国建筑工程管理工作中,难以全面确立我国建筑工程管理思路体系,主要是因为我国缺乏管理理论和经验。建立建筑工程管理思路体系是专业性较强的问题,其实施必须由资深的建筑学科专家和具有丰富工作经验的管理人员来组织,只有这样才能实现。国外建筑行业无论是技术还是理论都比较先进,因此我国在建筑工程管理思路体系的建立过程中,必须借鉴国外的先进理念,另外,还必须吸取先进的建筑工程管理方法,并对各方面的资料加以综合和整体。总之,要想确保我国建筑工程管理工作的有序进行,必须以健全的工程管理思路体系作为建筑工程总体管理水平提升的基本保障。加强施工质量管理,建立合理可行的质量保证体系,将工程的质量工作落到实处。工程施工企业要根据质量保证体系,形成行之有效的质量保证系统,树立质量方针,从而让其更加有指令性、系统性及可操作

性。要将人、材料和机械各个要素有效结合起来。 首先,人是质量控制的核心,要把人作为控制的推动力,充分调动人的积极性,树立工程质量第一的观念。其次,施工材料作为建筑产品的主体,对材料质量的控制是工程质量控制的关键。最后,工程施工的机械是进行施工机械化的主要标志,对现代化项目施工起到不可缺少的作用,它直接影响了施工项目的进度和质量,所以,选好用好工程机械设备非常重要。所以,应该根据工程项目的具体特点,综合考虑各种环境因素,实施有效的施工现场控制,为保证施工质量及安全创造良好的外部条件。 现阶段建筑工程管理越来越受到人们的重视,项目成本管理是工程管理不可或缺的内容。工程管理本质特征可以由项目成本管理体现出来。首先,建立项目成本管理责任制。项目管理人员的成本责任,不同于工作责任,工作责任完成不等于成本责任完成。在完成工作责任的同时,还应考虑成本责任的实施,进一步明确成本管理责任,使每个管理者都有成本管理意识,做到精打细算。其次,对施工队实行分包成本控制。项目部与施工队之间建立特定劳务合同关系,项目部有权对施工队的进度、质量、安全和现场管理标准进行监督管理,同时按合同支付劳务费用。再次,施工队成本的控制,由施工队自身管理,项目部不应该过多干预。 为了保证政府监督工作的有效性和权威性,应该提高监督队伍的整体素质。因此,加强建筑工程质量监督机构的质量管理的学习,从而使得监督队伍的业务素质得以提高。另外,质量监督手段也要不断进行完善,增加检测设备,使得监督工作具有较大科技的含量,实现监督工作的现代化。从建设市场的整体来看,市场运行的规则不够完善。执法不严,违法不究的现象常常会出现。工程质量受到危害在很大程度上都是由于建设市场的混乱所造成的。因此,政府必须建立健全的运行规则,保证这些规则能够真正落实处。

英语毕业论文引用和参考文献格式

英语毕业论文引用和参考文献格式 英语专业毕业论文引用和参考文献格式采用APA格式及规范。 一、文中夹注格式 英语学位论文引用别人的观点、方法、言论必须注明出处，注明出处时使用括号夹注的方法（一般不使用脚注或者尾注），且一般应在正文后面的参考文献中列出。关于夹注，采用APA格式。 （一）引用整篇文献的观点 引用整篇文献（即全书或全文）观点时有两种情况： 1.作者的姓氏在正文中没有出现，如：CharlotteandEmilyBrontewerepolaropposites,notonlyintheirpersonalitiesbutinthe irsourcesofinspirationforwriting(Taylor,1990). 2.作者的姓氏已在正文同一句中出现，如：TaylorclaimsthatCharlotteandEmilyBrontewerepolaropposites,notonlyintheirperso nalitiesbutintheirsourcesofinspirationforwriting(1990). 3.如果作者的姓氏和文献出版年份均已在正文同一句中出现，按APA的规范不需使用括号夹注，如： Ina1990article,TaylorclaimsthatCharlotteandEmilyBrontewerepolaropposites,noto nlyintheirpersonalitiesbutintheirsourcesofinspirationforwriting. 4.在英文撰写的论文中引用中文着作或者期刊，括号夹注中只需用汉语拼音标明作者的姓氏，不得使用汉字，如：(Zhang,2005) （二）引用文献中具体观点或文字 引用文献中某一具体观点或文字时必须注明该观点或者该段文字出现的页码出版年份，没有页码是文献引用不规范的表现。 1.引用一位作者的文献 （1）引用内容在一页内，如： EmilyBronte“expressedincreasinghostilityfortheworldofhumanrelationships,whet hersexualorsocial”(Taylor,1988：11). （2）引用内容在多页上，如： Newmark(1988：39-40)notesthreecharacteristicallyexpressivetext-types:(a)seriousimaginativel iterature注意在这些例子中引文超过一页时的页码标记方法：APA的规范是(1988,。 假若作者的姓氏已在正文同一句中出现，则不需要在括号夹注中重复，如：TaylorwritesthatEmilyBronte“expressedincreasinghostilityfortheworldofhumanre lationships,whethersexualorsocial”(1988：11).

本科毕业设计方案外文翻译范本

I / 11 本科毕业设计外文翻译 <2018届） 论文题目基于WEB 的J2EE 的信息系统的方法研究 作者姓名[单击此处输入姓名] 指导教师[单击此处输入姓名] 学科(专业 > 所在学院计算机科学与技术学院 提交日期[时间 ]

基于WEB的J2EE的信息系统的方法研究 摘要：本文介绍基于工程的Java开发框架背后的概念，并介绍它如何用于IT 工程开发。因为有许多相同设计和开发工作在不同的方式下重复，而且并不总是符合最佳实践，所以许多开发框架建立了。我们已经定义了共同关注的问题和应用模式，代表有效解决办法的工具。开发框架提供：<1）从用户界面到数据集成的应用程序开发堆栈；<2）一个架构，基本环境及他们的相关技术，这些技术用来使用其他一些框架。架构定义了一个开发方法，其目的是协助客户开发工程。 关键词：J2EE 框架WEB开发 一、引言 软件工具包用来进行复杂的空间动态系统的非线性分析越来越多地使用基于Web的网络平台，以实现他们的用户界面，科学分析，分布仿真结果和科学家之间的信息交流。对于许多应用系统基于Web访问的非线性分析模拟软件成为一个重要组成部分。网络硬件和软件方面的密集技术变革[1]提供了比过去更多的自由选择机会[2]。因此，WEB平台的合理选择和发展对整个地区的非线性分析及其众多的应用程序具有越来越重要的意义。现阶段的WEB发展的特点是出现了大量的开源框架。框架将Web开发提到一个更高的水平，使基本功能的重复使用成为可能和从而提高了开发的生产力。 在某些情况下，开源框架没有提供常见问题的一个解决方案。出于这个原因，开发在开源框架的基础上建立自己的工程发展框架。本文旨在描述是一个基于Java的框架，该框架利用了开源框架并有助于开发基于Web的应用。通过分析现有的开源框架，本文提出了新的架构，基本环境及他们用来提高和利用其他一些框架的相关技术。架构定义了自己开发方法，其目的是协助客户开发和事例工程。 应用程序设计应该关注在工程中的重复利用。即使有独特的功能要求，也

毕业论文外文文献

毕业论文外文文献 Photography Pen Film director and critic Alexander Astruc's comments in today, wrote a famous: "Following a variety of other arts, especially painting, novel, film is rapidly becoming a tool to express ideas. It swept the market, a mall next to the theater's entertainment products. It is a well preserved image of the times methods. Now is gradually becoming a language, that is, the artist can use it to express themselves through a means of thinking, no matter how abstract this idea, or that it is also used as a kind of artists like prose or fiction a form to express their themes. So, I put this new era for film today called "photo pen" era, that era of writing, the use of the camera …… "Silent film attempts to use symbolic links to all the concept and meaning of the expression. We know, Lenovo exist in the image itself, naturally present in the film development process, there is the role of performance in each posture and expression, present in every word of in; also present in the camera movement, this movement linked to a piece of things, to link people and things …… "Obviously, that is, screenwriter making his own films. Or even say that there is no longer what the movie writer. Because, in such films, the playwright and director, there is nothing between significant

毕业设计英语参考文献

C++ [1] Gordon Hogenson. C++/Cli The Visual C++ Language For .Net [M]. Wiley India Pvt. Ltd., 2007. [2] Motor Industry Software Reliability Association. MISRA-C: 2004: guidelines for the use of the C language in critical systems.[M]. MIRA, 2008. [3] Jeff Cogswell, John Paul Mueller. C++ All-In-One Desk Reference For Dummies [M]. Wiley publishing.Inc 2009. [4] Stephen R. Davis. C++ for Dummies [M]. wiley publishing.Inc 2008. [5] Harvey Dietel, Paul Deitel. C: How to Program [M]. Pearson Education,Inc 2010. [6] Bruce Eckel. Thinking in C++[M]. Prentice Hall, 2000. [7] Herbert Schildt. C++: a beginner's guide Beginner's Guides[M]. McGraw-Hill Professional, 2003. [8] Mark Lee. C++ Programming for the Absolute Beginner For the Absolute Beginner[M]. Course Technology, 2009. MIS参考文献 [9] Kenneth C. Laudon, Jane P. Laudon . Management Information Systems: Managing the Digital Firm[M]. Publisher Prentice Hall, 2007. [10] Raymond McLeod, George P. Schell. Management information systems[M]. Pearson/Prentice Hall, 2007. [11] James A. O'Brien, George M. Marakas. Management Information Systems[M]. McGraw-Hill/Irwin, 2008.

本科毕业设计外文翻译

Section 3 Design philosophy, design method and earth pressures 3.1 Design philosophy 3.1.1 General The design of earth retaining structures requires consideration of the interaction between the ground and the structure. It requires the performance of two sets of calculations: 1）a set of equilibrium calculations to determine the overall proportions and the geometry of the structure necessary to achieve equilibrium under the relevant earth pressures and forces; 2）structural design calculations to determine the size and properties of thestructural sections necessary to resist the bending moments and shear forces determined from the equilibrium calculations. Both sets of calculations are carried out for specific design situations (see 3.2.2) in accordance with the principles of limit state design. The selected design situations should be sufficiently Severe and varied so as to encompass all reasonable conditions which can be foreseen during the period of construction and the life of the retaining wall. 3.1.2 Limit state design This code of practice adopts the philosophy of limit state design. This philosophy does not impose upon the designer any special requirements as to the manner in which the safety and stability of the retaining wall may be achieved, whether by overall factors of safety, or partial factors of safety, or by other measures. Limit states (see 1.3.13) are classified into: a) ultimate limit states (see 3.1.3); b) serviceability limit states (see 3.1.4). Typical ultimate limit states are depicted in figure 3. Rupture states which are reached before collapse occurs are, for simplicity, also classified and

毕业设计外文翻译原文

编号： 毕业设计(论文)外文翻译 （原文） 院（系）：应用科技学院 专业：机械设计制造及其自动化 学生姓名：邓瑜 学号：0501120501 指导教师单位：应用科技学院 姓名：黄小能 职称： 2009年 5 月20 日

The Injection Molding The Introduction of Molds The mold is at the core of a plastic manufacturing process because its cavity gives a part its shape. This makes the mold at least as critical-and many cases more so-for the quality of the end product as, for example, the plasticiting unit or other components of the processing equipment. Mold Material Depending on the processing parameters for the various processing methods as well as the length of the production run, the number of finished products to be produced, molds for plastics processing must satisfy a great variety of requirements. It is therefore not surprising that molds can be made from a very broad spectrum of materials, including-from a technical standpoint-such exotic materials as paper matched and plaster. However, because most processes require high pressures, often combined with high temperatures, metals still represent by far the most important material group, with steel being the predominant metal. It is interesting in this regard that, in many cases, the selection of the mold material is not only a question of material properties and an optimum price-to-performance ratio but also that the methods used to produce the mold, and thus the entire design, can be influenced. A typical example can be seen in the choice between cast metal molds, with their very different cooling systems, compared to machined molds. In addition, the production technique can also have an effect; for instance, it is often reported that, for the sake of simplicity, a prototype mold is frequently machined from solid stock with the aid of the latest technology such as computer-aided (CAD) and computer-integrated manufacturing (CIM). In contrast to the previously used methods based on the use of patterns, the use of CAD and CAM often represents the more economical solution today, not only because this production capability is available pin-house but also because with any other technique an order would have to be placed with an outside supplier. Overall, although high-grade materials are often used, as a rule standard materials are used in mold making. New, state-of-the art (high-performance) materials, such as ceramics, for instance, are almost completely absent. This may be related to the fact that their desirable characteristics, such as constant properties up to very high temperatures, are not required on molds, whereas their negative characteristics, e. g. low tensile strength and poor thermal conductivity, have a clearly related to ceramics, such as sintered material, is found in mild making only to a limited degree. This refers less to the modern materials and components