文档库

最新最全的文档下载
当前位置:文档库 > T498B685K006AHE500中文资料

T498B685K006AHE500中文资料

?KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630039100% Accelerated steady state aging 100% Surge current testing EIA standard case size Voltage: 6 to 50 VDC

RoHS Compliant versions available Various termination options

Dimensions - Millimeters (Inches)

T498 Ordering Information

X (Ref)P (Ref)R (Ref)

T (Ref)

A (Min)

G (Ref)

E (Ref)

0.10 ± 0.10(.004 ± .004)0.4(.016)0.4(.016)0.13(.005) 1.4(.055) 1.1(.043) 1.3(.051)0.10 ± 0.10(.004 ± .004)0.5(.020) 1.0(.039)0.13(.005) 2.1(.083) 1.8(.071) 2.2(.087)0.10 ± 0.10(.004 ± .004)0.9(.035) 1.0(.039)0.13(.005) 3.1(.122) 2.8(.110) 2.4(.094)0.10 ± 0.10(.004 ± .004)0.9(.035) 1.0(.039)0.13(.005) 3.8(.150) 3.5(.138) 3.5(.138)0.10 ± 0.10(.004 ± .004)

1.7(.067)

1.0(.039)0.13(.005) 3.8(.150) 3.5**(.138) 3.5**(.138)

A T E500

Voltage

Note: 006 = 6.3

Failure Rate A = Not Applicable

Lead Material T = 100% Tin G = Gold H = Tin/Lead

ESR

Note: in mOhm

K designates “thousand”E1K5 = 1.5 Ohm E500 = 0.5 Ohm

Termination cutout at KEMET’s Option, either end W

K

X

CATHODE (-) END

VIEW

SIDE VIEW

ANODE (+) END VIEW

T

G

S

S

B

B

H

BOTTOM VIEW

E F

A L

Termination cutout at KEMET s Option,either end

R

P

(SnPb 5% Pb min)39

l i d T a n t a l u m S u r f a c e M o u n t SOLID TANTALUM CHIP CAPACITORS T498 SERIES—HIGH TEMPERATURE (150°)S o l i d T a n t a l u m S u r f a c e M o u n t

?KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

SOLID TANTALUM CHIP CAPACITORS

T498 SERIES—HIGH TEMPERATURE (150°)

T498 RATINGS & PART NUMBER REFERENCE

LAND PATTERN DIMENSIONS

FOR REFLOW SOLDER

KEMET/EIA Size Code Pad Dimensions

Z G X Y (Ref)A/3216-18 4.700.80 1.50 1.95B/3528-21 5.00 1.10 2.50 1.95C/6032-287.60 2.50 2.50 2.55D/7343-318.90 3.80 2.70 2.55X/7343-43

8.90

3.80

4.40

2.55

Case Codes

Tape & Reel Dimensions

KEMET EIA

Tape Width (mm)Pitch mm ±0.1Reel Quantity Part Sprocket 180mm (7”)A 3216-188 ±0.3842000B 3528-21

8 ±0.3

842000C 6032-2812 ±0.384500D 7343-3112 ±0.384500X

7343-4312 ±0.3

8

4

500

PACKAGING SPECIFICATIONS

COMPONENT MARKING

22710K 525

Polarity

Indicator (+)

Picofarad Code Rated Voltage

Print Week Code 1st Digit = Year

2nd & 3rd Digits = Week “525” = 25th Week of 2005

KEMET ID

(HT)

KEMET High Temp (1) To complete KEMET part number, insert K - ±10% or M - ±20% capacitance tolerance.(2) To complete KEMET part number, insert T for 100% tin, H for Sn/Pb or G for gold.** 6 volt product equivalent to 6.3 volt product.

Note: Higher voltage ratings, lower ESR and tighter capacitance tolerance product may be substituted within the same size at KEMET’s option.Voltage substitutions will be marked with the higher voltage rating.

C

X

Grid

Placement Courtyard

G Y

Z

Capaci-tance μF

Case Size

KEMET Part Number

DC Leakage μA @25oC Max

DF %@ +25oC 120 Hz Max ESR Ω@ +25°C 100 kHz Max

10.0B T498B106(1)006A(2)E2K10.7 6.0 2.1

15.0B T498B156(1)006A(2)E1K8 1.0 6.0 1.822.0C T498C226(1)006A(2)E1K3 1.4 6.0 1.333.0B T498B336(1)006A(2)E1K7 2.1 6.0 1.747.0C T498C476(1)006A(2)E800 3.0 6.00.8100.0D T498D107(1)006A(2)E600 6.38.00.62.2A T498A225(1)010A(2)E4K60.5 6.0 4.63.3A T498A335(1)010A(2)E3K60.5 6.0 3.64.7A T498A475(1)010A(2)E2K90.5 6.0 2.94.7B T498B475(1)010A(2)E2K70.5 6.0 2.710.0B T498B106(1)010A(2)E1K8 1.0 6.0 1.815.0B T498B156(1)010A(2)E1K5 1.5 6.0 1.515.0C T498C156(1)010A(2)E1K8 1.5 6.0 1.822.0B T498B226(1)010A(2)E1K5 2.2 6.0 1.522.0C T498C226(1)010A(2)E1K1 2.2 6.0 1.147.0D T498D476(1)010A(2)E600 4.7 6.00.6100.0D T498D107(1)010A(2)E60010.08.00.6220.0X T498X227(1)010A(2)E50022.08.00.51.0A T498A105(1)016A(2)E6K50.5 4.0 6.53.3A T498A335(1)016A(2)E3K40.5 6.0 3.44.7B T498B475(1)016A(2)E2K10.8 6.0 2.16.8A T498A685(1)016A(2)E2K6 1.1 6.0 2.66.8B T498B685(1)016A(2)E1K8 1.1 6.0 1.810.0B T498B106(1)016A(2)E2K8 1.6 6.0 2.810.0C T498C106(1)016A(2)E1K4 1.6 6.0 1.415.0C T498C156(1)016A(2)E1K1 2.4 6.0 1.122.0C T498C226(1)016A(2)E1K0 3.6 6.0 1.033.0D T498D336(1)016A(2)E600 5.3 6.00.647.0D T498D476(1)016A(2)E6007.5 6.00.668.0D T498D686(1)016A(2)E60010.8 6.00.6100.0X T498X107(1)016A(2)E10016.08.00.11.0A T498A105(1)020A(2)E5K90.5 4.0 5.910.0C T498C106(1)020A(2)E1K1 2.0 6.0 1.10.47A T498A474(1)025A(2)E8K50.5 4.08.52.2B T498B225(1)025A(2)E3K00.6 6.0 3.010.0C T498C106(1)025A(2)E1K1 2.5 6.0 1.115.0D T498D156(1)025A(2)E700 3.8 6.00.722.0D T498D226(1)025A(2)E600 5.5 6.00.633.0D T498D336(1)025A(2)E6008.3 6.00.60.33A T498A334(1)035A(2)E11K 0.5 4.011.01.0A T498A105(1)035A(2)E10K 0.5 4.010.01.5C T498C155(1)035A(2)E3K30.5 6.0 3.33.3C T498C335(1)035A(2)E1K7 1.2 6.0 1.76.8D T498D685(1)035A(2)E900 2.4 6.00.910.0D T498D106(1)035A(20E700 3.5 6.00.722.0X T498X226(1)035A(2)E5007.7 6.00.533.0X T498X336(1)035A(2)E50011.6 6.00.53.3D T498D335(1)050A(2)E1K1 1.7 6.0 1.110.0

D

T498D106(1)050A(2)E1K0 5.0 6.0

1.0

25 Volt Rating at +85oC (17 Volt Rating at +150oC)35 Volt Rating at +85oC (24 Volt Rating at +150oC)50 Volt Rating at +85oC (34 Volt Rating at +150oC)**6 Volt Rating at +85oC ( 4 Volt Rating at +150oC)10 Volt Rating at +85oC ( 7 Volt Rating at +150oC)16 Volt Rating at +85oC (11 Volt Rating at +150oC)20 Volt Rating at +85oC (13 Volt Rating at +150oC)

?KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

Tape & Reel Packaging

KEMET’s Molded Tantalum and Aluminum Chip Capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with EIA Standard 481-1: Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick and place systems.

Right Hand Orientation Only

(+)

(–)

Embossed Carrier

Embossment

Top T ape Thickness

.10mm (.004") Max Thickness

8mm ±.30(.315±.012")or

12mm ±.30(.472±.012")

178mm (7.00")or 330mm (13.00")8mm (0.315")or

12mm (0.472")180mm (7.0")

330mm (13.0")

QUANTITIES PACKAGED PER REEL

Case Code Tape

KEMET EIA Width-mm

7" Reel*13" Reel*R 2012-1282,50010,000S 3216-1282,50010,000T 3528-1282,50010,000U 6032-15121,0005,000W 7343-15121,0003,000V 7343-20121,0003,000A 3216-1882,0009,000B 3528-2182,0008,000C 6032-28125003,000D 7343-31125002,500Y 7343-40125002,000X 7343-43125002,000E 7260-38

12

500

2,000

* No c-spec required for 7" reel packaging. C-7280 required for 13" reel http://www.wendangku.net/doc/d412e0e65ef7ba0d4a733b8f.htmlbeling:Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.

Refer to EIA-556.

TANTALUM AND ALUMINUM CHIP CAPACITORS

Packaging Information

92

Performance Notes

1.Cover Tape Break Force: 1.0 Kg Minimum.

2.Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:

Tape Width Peel Strength

8 mm 0.1 Newton to 1.0 Newton (10g to 100g)12 mm 0.1 Newton to 1.3 Newton (10g to 130g)

The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165?to 180?from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.

3.Reel Sizes:Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13")reels (with C-7280). Note that 13” reels are preferred.

http://www.wendangku.net/doc/d412e0e65ef7ba0d4a733b8f.htmlbeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.Refer to EIA-556.

Embossed Carrier Tape Configuration: Figure 1

T498B685K006AHE500中文资料

NOTES

1.B1 dimension is a reference dimension for tape feeder clearance only.

2.The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other.

3.Tape with components shall pass around radius “R ” without damage (see sketch A). The minimum trailer length (Fig. 2) may require additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2)

4.The cavity defined by A ,B ,and K shall be configured to surround the part with sufficient clearance such that the chip does not pro-Table 1 — EMBOSSED TAPE DIMENSIONS (Metric will govern)

Constant Dimensions — Millimeters (Inches)

Tape Size D 0

E

P 0

P 2

T Max T 1Max 8 mm 1.5 1.75 ±0.10 4.0 ±0.10 2.0 ±0.050.6000.100and +0.10 -0.012 mm

(0.059(0.069 ±0.004)(0.157 ±0.004)

(0.079 ±0.002)

(0.024)

(0.004)

+0.004, -0.0)Variable Dimensions — Millimeters (Inches)

Tape Size Pitch B 1Max.D 1Min.F P 1

R Min.T 2Max W A 0B Note 1Note 2Note 3Note 4

8 mm

Single 4.4 1.0

3.5 ±0.05

4.0 ±0.10

25.0

2.58.0 ±0.30(4 mm)

(0.173)

(0.039)(0.138 ±0.002)(0.157 ±0.004)(0.984)(0.098)

(.315 ±0.012)

12 mm

Double 8.2 1.5 5.5 ±0.058.0 ±0.1030.0 4.612.0 ±0.30(8 mm)

(0.323)

(0.059)(0.217 ±0.002)

(0.315 ±0.004)(1.181)

(0.181)(0.472 ±0.012)

Packaging Information

?KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300Embossed Carrier Tape Configuration (cont.)

Sketch D: Tape Camber (Top View)

Allowable camber to be 1 mm/250 mm.

250mm (9.843)

1mm (0.039) Max.

(Metric will govern)

Reel Dimensions (Metric Dimensions will govern)

N Min W 1W 2Max W 3

50.08.414.47.9 Min (1.969)+1.5, -0.0(0.567)(0.311)See (0.33110.9 Max Note 3+0.059, -0.0)

(0.429)Table 1

12.418.411.9 Min Packaging Information

400mm (15.75) Min.

20°

95