HCC/HCF4018B
PRESETTABLE DIVIDE-BY-N COUNTER
DESCRIPTION
.MEDIUM SPEED OPERATION -10MHz (typ.)AT V DD –V SS =10V
.FULLY STATIC OPERATION
.QUIESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE
.STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS
.INPUT CURRENT OF 100nA AT 18V AND 25°C FOR HCC DEVICE
.100%TESTED FOR QUIESCENT CURRENT .5V,10V,AND 15V PARAMETRIC RATINGS .
MEETS ALL REQUIREMENTS OF JEDECTEN-TATIVE STANDARD N o 13A,”STANDARD SPECIFICATIONS FOR DESCRIPTION OF ”B”SERIES CMOS DEVICES”
June 1989
The HCC4018B (extended temperature range)and HCF4018B (intermediate temperature range)are monolithic integrated circuit,available in 16-lead dual in-line plastic or ceramic package and plastic micropackage.
The HCC/HCF4018B types consist of 5Johnson-Counter stages,buffered Q outputs from each stage,and counter preset control gating.CLOCK,RESET,DATA,PRESET ENABLE,and 5individual JAM inputs are provided.Divide by 10,8,6,4,or 2counter configurations can be implemented by feed-ing the Q5,Q4,Q3,Q2,Q1signals,respectively,back to the DATA input.
Divide-by-9,7,5,or 3counter configurations can be implemented by the use of a HCC/HCF4011B gate package to properly gate the feedback connection to the DATA input.Divide-by-functions greater than 10can be achieved by use of multiple HCC/HCF 4018B units.The counter is advanced one count at the positive clock-signal transition.Schmitt Trigger action on the clock line permits unlimited clock rise and fall times.A high RESET signal clears the counter to an all-zero condition.A high PRESENT-ENABLE signal allows information on the JAM in-puts to preset the counter.Anti-lock gating is provided to assure the proper counting sequence.
EY
(Plastic Package)F
(Cerami c Frit Seal Package )
C1
(Plastic Chip Carrier)
ORDER CODES :
HCC4018BF HCF4018BM1HCF4018BEY HCF4018BC1
PIN CONNECTIONS
M1
(Micro Package)
1/12
FUNCTIONAL DIAGRAM
ABSOLUTE MAXIMUM RATINGS
Symbol Parameter Value Unit
V DD*Supply Voltage:HCC Types
HCF Types –0.5to+20
–0.5to+18
V
V
V i Input Voltage–0.5to V DD+0.5V I I DC Input Current(any one input)±10mA
P t o t Total Power Dissipation(per package)
Dissipation per Output Transistor
for T o p=Full Package-temperature Range 200
100
mW
mW
T o p Operating Temperature:HCC Types
HCF Types –55to+125
–40to+85
°C
°C
T s t g Storage Temperature–65to+150°C
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Value Unit
V DD Supply Voltage:HCC Types
HCF Types 3to18
3to15
V
V
V I Input Voltage0to V DD V
T o p Operating Temperature:HCC Types
HCF Types –55to+125
–40to+85
°C
°C
Stresses above those listed under”Absolute Maximum Ratings”may cause permanent damage to the device.This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sec-tions of this specification is not implied.Exposure to absolute maximum rating conditions for external periods may affect device reliability.
*All voltage values are refered to V SS pin voltage.
HCC/HFC4018B
2/12
HCC/HCF4018B LOGIC DIAGRAM
TIMING DIAGRAM
3/12
STATIC ELECTRICAL CHARACTERISTICS (under recommended operating conditions)
Test Conditions
Value
V I V O |I O |V D D T L o w *25°C T Hi g h *Symbol
Parameter (V)(V)
(μA)(V)Min.Max.Min.Typ.Max.Min.Max.
Unit
I L
Quiescent Current
HCC Types 0/5
550.045150μA
0/1010100.04103000/15
15200.04206000/20
201000.081003000HCF
Types
0/5
5200.04201500/10
10400.04403000/15
1580
0.04
80
600
V OH
Output High Voltage
0/5<15 4.95 4.95 4.95V
0/10<1109.959.959.950/15
<11514.95
14.95
14.95V OL
Output Low Voltage
5/0<150.050.050.05V V
10/0<1100.050.050.0515/0
<1150.05
0.05
0.05
V IH
Input High Voltage
0.5/4.5<15 3.5 3.5 3.51/9<1107771.5/13.5<1
1511
1111
V IL
Input Low Voltage
4.5/0.5<15 1.5 1.5 1.5V 9/1
<1
1033313.5/1.5<1
154
4
4
I OH
Output Drive Current
HCC Types 0/5
2.55–2–1.6–
3.2–1.15mA
0/5 4.65–0.64–0.51–1–0.360/10
9.510–1.6–1.3–2.6–0.90/1513.515–4.2–3.4–6.8–2.4HCF
Types 0/5
2.55–1.53–1.36–
3.2–1.10/5
4.65–0.52–0.44–1–0.360/10
9.510–1.3–1.1–2.6–0.90/15
13.515–3.6–3.0–6.8–2.4I OL
Output Sink Current
HCC
Types
0/5
0.450.640.5110.36mA
0/10
0.510 1.6 1.3 2.60.90/15 1.515 4.2 3.4 6.8 2.4HCF
Types
0/5
0.450.520.4410.360/10
0.510 1.3 1.1 2.60.90/15
1.515 3.6
3.0
6.8 2.4
I IH ,I IL
Input Leakage Current
HCC Types 0/18Any Input
18±0.1±10–5±0.1±1μA
HCF Types
0/1515
±0.3±10–5
±0.3±1
C I Input Capacitance Any Input 5
7.5
pF
*T Low =–55°C for HCC device :–40°C for HCF device.*T High =+125°C for HCC device :+85°C for HCF device.
The Noise Margin for both ”1”and ”0”level is :1V min.with V DD =5V,2V min.with V DD =10V,2.5V min.with V DD =15V.
HCC/HFC4018B
4/12
DYNAMIC ELECTRICAL CHARACTERISTICS (T amb =25°C,C L =50pF,R L =200k ?,typical temperature coefficient for all V DD values is 0.3%/°C,all input rise and fall times =20ns)
Value Symbol
Parameter
Test Conditions
V D D (V)Min.
Typ.Max.Unit
t PL H ,t PHL Propagation Delay Time
5200400ns 109018015
65130t T HL ,t TL H Transition Time
5100200ns 105010015
4080
f CL
Maximum Clock Input Frequency
536MHz
1071415
8.517t W
Clock Input Width
516080ns 10703515
50
25
t r ,t f
Clock Input Rise or Fall Time
5Unlimited
μs
1015
t s e t u p
Data Input Set-up Time
54020ns
1012615
63t H
Data Input Hold-time
514070ns 10804015
60
30
PRESET*O R RESET OPERATION t PL H ,t PHL Propagation Delay Time
(reset or reset to Q)
5275550ns
1012525015
90180
t W
Preset or Reset Pulse Width
516080ns
10703515
5025t re m
Preset or Reset Removal Time
58040ns 10301515
20
10
?At
PRESET ENABLE OR JAM inputs
HCC/HCF4018B
5/12
Typical Output Low(sink)Current Characteristics.Typical Output high(source)Current Charac-
teristics.
Minimum Output High(source)Current Charac-teristics.typical Output low(sink)Current Characteristics.
HCC/HFC4018B 6/12
TYPICAL APPLICATIONS
External connections for divide by10,9,8,7,6,5,4,3,2operation. DIVIDE BY10Q5
DIVIDE BY8Q4 DIVIDE BY6Q3 DIVIDE BY4Q2 DIVIDE BY2Q1
CONNECTED
BACK TO
”DATA”
NO EXTERNAL
COMPONENTS
REQUIRED
NO CONNECTED
HCC/HCF4018B
7/12
HCC/HFC4018B
Plastic DIP16(0.25)MECHANICAL DATA
mm inch DIM.
MIN.TYP.MAX.MIN.TYP.MAX.
a10.510.020
B0.77 1.650.0300.065 b0.50.020
b10.250.010
D200.787 E8.50.335
e 2.540.100
e317.780.700
F7.10.280
I 5.10.201
L 3.30.130
Z 1.270.050
P001C 8/12
HCC/HCF4018B Ceramic DIP16/1MECHANICAL DATA
mm inch
DIM.
MIN.TYP.MAX.MIN.TYP.MAX.
A200.787
B70.276
D 3.30.130
E0.380.015
e317.780.700
F 2.29 2.790.0900.110
G0.40.550.0160.022
H 1.17 1.520.0460.060
L0.220.310.0090.012
M0.51 1.270.0200.050
N10.30.406
P7.88.050.3070.317
Q 5.080.200
P053D
9/12
HCC/HFC4018B
SO16(Narrow)MECHANICAL DATA
mm inch DIM.
MIN.TYP.MAX.MIN.TYP.MAX.
A 1.750.068
a10.10.20.0040.007 a2 1.650.064 b0.350.460.0130.018 b10.190.250.0070.010 C0.50.019
c145°(typ.)
D9.8100.3850.393
E 5.8 6.20.2280.244
e 1.270.050
e38.890.350
F 3.8 4.00.1490.157
G 4.6 5.30.1810.208
L0.5 1.270.0190.050 M0.620.024 S8°(max.)
P013H 10/12
HCC/HCF4018B
PLCC20MECHANICAL DATA
mm inch
DIM.
MIN.TYP.MAX.MIN.TYP.MAX.
A9.7810.030.3850.395
B8.899.040.3500.356
D 4.2 4.570.1650.180
d1 2.540.100
d20.560.022
E7.378.380.2900.330
e 1.270.050
e3 5.080.200
F0.380.015
G0.1010.004
M 1.270.050
M1 1.140.045
P027A
11/12
HCC/HFC4018B
Information furnished is believed to be accurate and reliable.However,SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use.No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics.Specificationsmentioned in this publication are subject to change without notice.This publication supersedes and replaces all information previously supplied.
SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics.
?1994SGS-THOMSON Microelectronics-All Rights Reserved
SGS-THOMSON Microelectronics GROUP OF COMPANIES
Australia-Brazil-France-Germany-Hong Kong-Italy-Japan-Korea-Malaysia-Malta-Morocco-The Netherlands-
Singapore-Spain-Sweden-Switzerland-Taiwan-Thailand-United Kingdom-U.S.A
12/12