125
10/02
Long-life grade capacitors Applications
I Frequency converters
I Professional power supplies I Uninterruptible power supplies
Features
I Extremely compact, i.e. high CU product I High reliability and ripple current capability I All-welded construction ensures reliable
electrical contact
I Version with optimized construction for base cooling (2-pad solution) available
I Version with low-inductance design available Construction
I Charge-discharge proof, polar
I Aluminum case with insulating sleeve I Poles with screw terminal connections
I Mounting with ring clips, clamps or threaded stud
I
The bases of types with threaded stud and d ≤ 76,9 mm are not insulated, types with d = 91 mm have fully insulated bases
B43456Capacitors with Screw Terminals B43458
Compact – 85°C
126
10/02
Compact – 85°C
B43456 / B43458Specifications and characteristics in brief Ripple current capability
Due to the ripple current capability of the contact elements, the following current upper limits must not be exceeded:Rated voltage U R Surge voltage U S 350 … 450 VDC 1,10 · U R
Rated capacitance C R Capacitance tolerance 1000 … 18000 μF ± 20 % M
Leakage current I L (5 min, 20°C)Self-inductance ESL
Approx. 20 nH
Capacitors with low inductance design:d ≥ 64,3 mm: approx. 13 nH
Useful life
85°C; U R ; I ~R
40°C; U R ; 1,5 · I ~R
> 12000 h > 250000 h
Requirements:?C /C ≤ ± 30 % of initial value
ESR ≤ 3 times initial specified limit I L
≤ initial specified limit
Failure percentage:≤ 1 %Failure rate:≤ 40 fit (≤ 40 · 10–9/h)
(for definiton “fit ”, refer to chapter “Quality ”, page 62)
Voltage endurance test 85°C; U R
2000 h
Post test requirements:?C /C ≤ ± 10 % of initial value
ESR ≤ 1,3 times initial specified limit I L
≤ initial specified limit
Vibration resistance
To IEC 60068-2-6, test Fc:
displacement amplitude 0,75mm, frequency range 10 to 55Hz,acceleration max. 10g , duration 3 × 2 h
IEC climatic category
To IEC 60068-1:
U R ≤ 400 VDC: 40/085/56 (– 40°C/+ 85°C/56 days damp heat test)U R = 450 VDC: 25/085/56 (– 25°C/+ 85°C/56 days damp heat test)Detail specifications Sectional specification
Similar to CECC 30301-803, CECC 30301-807IEC 60384-4
Capacitor diameter
51,6 mm 64,3 mm 76,9 mm 91,0 mm I ~max
30 A
40 A
50 A
70
A
I L 0,3μA C R μF -------U R V
-------?è????0,7≤4μA +
127
10/02
Compact – 85°C
B43456 / B43458Dimensional drawings
Type B43456
Type B43458
Ring clip/clamp mounting
Threaded stud mounting
Positive pole marking: +
The base of types with threaded stud and d = 91 mm is fully insulated (the lengths l and l 1 are in-creased by 0,5 mm in these cases). For types with threaded stud and d ≤ 76 mm the base is not insulated. Also refer to the notes on mounting given on page 168.Screw terminals with UNF threads are available upon request.Dimensions and weights Dimensions are also valid for 2-pad solution and low-inductance design.Packing
For ecological reasons the packing is pure cardboard.Ter-minal Dimensions (mm) with insulating sleeve
Approx.wt. (g)d I ± 1
I 1 ± 1
I 2
+ 0l 3
d 1d 2 max d
3 max a
+ 0,2– 1
– 0,4
M 5M 551,6 +0/–0,851,6 +0/–0,880,7105,787,2112,217177,0 +0,2/– 17,0 +0,2/– 1M 12M 128,28,213,513,522,222,2220
280M 564,3 +0/–0,8105,7112,2177,0 +0,2/– 1
M 128,2
13,528,5 440M 6M 6M 676,9 +0/–0,776,9 +0/–0,776,9 +0/–0,7105,7143,2220,7111,5149,0226,51717176,4 +1,1/– 0,86,4 +1,1/– 0,86,4 +1,1/– 0,8M 12M 12M 1217,717,717,717,717,717,731,731,731,75408401300M 6M 6
91,0 +0/–291,0 +0/–2
144,5221,0
149,8226,3
1717
6,4 +1,1/– 0,86,4 +1,1/– 0,8M 12M 1217,717,7
17,717,7
31,7 31,7
12001900
Capacitor diameter d Packing units (pieces)Capacitor diameter d Packing units (pieces)51,6 mm 64,3 mm
2215
76,9 mm 91,0 mm 128
128
10/02
Compact – 85°C
B43456 / B43458Special designs
I Low-inductance design I 2-pad solution
Design for optimized connection of the capacitor to the heatsink when using base cooling.This version is available for capacitors without threaded stud and for diameters ≥64,3mm (cf.I ~R (B) in table “Technical data and ordering codes ” and useful life graphs).
Ordering codes:Accessories
The following items are included in the delivery package, but are not fastened to the capacitors:
The following must be ordered separately:Ring clips
B 44 030 (cf. page 169)Clamps for capacitors with d ≥ 64,3 mm B 44 030 (cf. page 173)Insulating parts
B 44 020 (cf. page 166)
Design
Identification in 3rd block of ordering code Remark
Low inductance (13 nH)M003For capacitors with diameter d ≥ 64,3 mm
2-pad solution
M006
For capacitors with diameter d ≥ 64,3 mm and without threaded stud
Thread
Toothed washers Screws/Nuts
Maximum torque For terminals
M 5 A 5,1 DIN 6797Cylinder-head screw M 5 × 8 DIN 84-4.82Nm M 6
A 6,4 DIN 6797
Cylinder-head screw M 6 × 12 DIN 85-4.8
2,5Nm
For mounting M 12
J 12,5 DIN 6797Hex nut BM 12 DIN 439
10
Nm
129
10/02
Compact – 85°C
B43456 / B43458Overview of available types
The capacitance and voltage ratings listed above are available in different cases upon request.Other voltage and capacitance ratings are also available upon request.
U R (VDC)350
400450C R (μF)
Case dimensions d × l (mm)
1 00051,6 × 80,7
51,6 × 80,71 50051,6 × 80,751,6 × 80,751,6 × 105,72 20051,6 × 105,751,6 × 105,764,3 × 105,73 30064,3 × 105,776,9 × 105,7
3 90064,3 × 105,7
4 70076,9 × 105,7
5 60076,9 × 105,7
76,9 × 143,26 80076,9 × 143,2
91,0 × 144,58 20076,9 × 143,2
76,9 × 220,710 00091,0 × 144,5
12 00091,0 × 144,576,9 × 220,791,0 × 221,0
15 00076,9 × 220,791,0 × 221,0
18 000
91,0 × 221,0
130
10/02
Compact – 85°C
B43456 / B43458Technical data and ordering codes
U R
VDC C R
100 Hz 20°C
μF
Case
dimensions d × l mm ESR max 100 Hz 20°C m ?Z max 10 kHz 20°C m ?
I ~max 100 Hz 40°C A
I ~R
100 Hz 85°C A
I ~R (B)100 Hz 85°C A
Ordering code 1)350
1 50051,6 × 80,711093165,711B4345*A4158M000
2 20051,6 × 105,77363217,614B4345*A4228M000
3 90064,3 × 105,74138321221B4345*A4398M0002)5 60076,9 × 105,72928431530B4345*A4568M0002)8 20076,9 × 143,22020502036B4345*A4828M0002)12 00091,0 × 144,51414702852B4345*A4129M0002)15 00076,9 × 220,71111503450B4345*A4159M0002)18 00091,0 × 221,0
9
9703858B4345*A4189M0002)400 1 00051,6 × 80,7160133134,68,2B4345*A9108M0001 50051,6 × 80,711093176,013B4345*A9158M0002 20051,6 × 105,77363228,015B4345*A9228M0003 30064,3 × 105,74944301120B4345*A9338M0002)4 70076,9 × 105,73432401429B4345*A9478M0002)6 80076,9 × 143,22424501933B4345*A9688M0002)10 00091,0 × 144,51616702548B4345*A9109M0002)12 00076,9 × 220,71414503146B4345*A9129M0002)15 00091,0 × 221,0
11
11703554B4345*A9159M0002)450 1 00051,6 × 80,7220190134,89,6B4345*A5108M0001 50051,6 × 105,7150130186,512B4345*A5158M0002 20064,3 × 105,710085248,415B4345*A5228M0002)3 30076,9 × 105,76557321223B4345*A5338M0002)5 60076,9 × 143,23835491731B4345*A5568M0002)6 80091,0 × 144,53231572037B4345*A5688M0002)8 20076,9 × 220,72626502436B4345*A5828M0002)12 00091,0 × 221,0
18
18
70
32
51
B4345*A5129M0002)
Preferred types
1)*“6” = for capacitors with ring clip/clamp mounting
“8” = for capacitors with threaded stud
2)For 2-pad solution (types withoud threaded stud) and for low-inductance design, see page 128.
131
10/02
Compact – 85°C
B43456 / B43458Useful life
depending on ambient temperature T A (for natural cooling) and versus temperature of case base T B (for base cooling) under ripple current operating conditions 1)
F requency factor of
permissible ripple current I ~versus frequency f
1)The ripple current refers to I ~R for natural cooling or to I ~R (B) for base cooling, respectively.
Refer to page 40 for an explanation on how to interpret the useful life graphs.
4
132
10/02
Compact – 85°C
B43456 / B43458 F requency characteristics of ESR Typical behavior
Impedance Z
versus frequency f
Typical behavior at 20°C
4
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 801709, 81617 München, DEUTSCHLAND
( ++49 89 636 09, FAX (089) 636-2 2689
EPCOS AG 2002. Vervielf?ltigung, Ver?ffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne aus-drückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elek-troindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Lieferm?glichkeiten richten Sie bitte an den Ihnen n?chstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente k?nnen aufgrund technischer Erfordernisse Gefahrstoffe ent-halten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zust?ndige Vertriebsgesellschaft ein-zuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
( ++49 89 636 09, FAX (089) 636-2 2689
EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representa-tives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.