1 Kotari-yakemachi, Nagaokakyo, Kyoto 617-8520, Japan Tel. +81-75-951-8151
http://panasonic.co.jp/semicon
Products and specifications are subject to change without notice.
Please ask for the latest Product Standards to guarantee the satisfaction
of your product requirements.,
New publication, effective from 22 Dec. 2006M00782AE Overview Feature Applications Specifications
MIP551/MIP552 is the best device for LED-lighting.
LED-lighting using MIP551/MIP552 has small size & high efficiency by simple design in worldwide input voltage (80 VAC to 280 VAC), and has dimmer control function by external signal.y Worldwide input voltage, 80 VAC to 280 VAC
y Typical LED peak current
MIP551: 0.5A
MIP552: 1.0A
*Peak current can be adjusted in two-stage
corresponding to the input voltage.
y Dimmer control function : EX-pin voltage range, 0 V to 3 V
y Function to set input voltage that can be driven :L-pin voltage range y Over temperature protection for IPD (Auto-restart)LED-lighting
HB-LED drive circuit
Example of typical application circuit for LED-lighting
1.0A (typ.)0.5A (typ.)IDpeak 6?(typ.)TO-220IPD7-A2DIP7-A1Package 44kHz (typ.)fosc 30W 2)with heat sink
(Io=0.70A, C3=220μF)
MIP5520MDSLJ 10W
(Io=0.35A, C3=47μF)
12?(typ.)≥700V MIP5510MSSCF Maximum 1)
output power (Ta=25°C)
RON VDSS Item 1)The maximum output power is different depending on parts and ambient conditions, so the following value is a reference value.
2)When the input power is more than 25W, it is necessary to connect PFC circuit in input side.
3) It is possible to drive without the smoothing aluminum electrolytic capacitor when the input voltage detecting function is used. 4) When the line voltage detecting function or LED dimmer control function is not used, the circuit can be simplified. DRAIN
7NC
6VIN
5SOURCE
4VDD
3L
2EX
1Pin Name
Pin No.Unit :mm ?DIP7-A1(MIP551)?TO-220IPD7-A2(MIP552)Unit :mm SOURCE
EX
R2VR1
C6SOURCE EMS filter 4)Option for dimmer control 3)It is possible to drive without the aluminum electrolytic capacitor C3FRD1C4R4C7MIP55X L1IC1
C5
R1F1ZNR L2
INPUT L
Drain
VIN VDD
DB1
C1C2R3
LED
4)Option for line voltage detection
+
Small size & high efficiency, worldwide input (80 VAC to 280 VAC),
and constant current control with simple LED drive circuit !IPD for LED-lighting MIP551/MIP552
SOURCE
8SOURCE
7NC
6DRAIN
5VIN
4L
3EX
2VDD
1Pin Name
Pin No.
Waveform image
Reference data DRAIN peak current and LED average current vs EX pin voltage
DRAIN current waveform and LED current waveform
Explanation of function terminal IDpeak
ILIMIT
123VEX[V]
LED
light-out
L pin voltage vs IDpeak EX pin voltage vs IDpeak Driver current
LED current
Controlled peak current
MIP5510MSSCF Output characteristic MIP5520MDSLJ Output characteristic Io vs η0%20%40%60%80%100%0.00.10.20.30.40.50.6Io[A]η[%]LED 1pcs
LED 3pcs LED 5pcs MIP551,Vin=100VAC,C3=47μF Io vs η
0%
20%40%
60%80%
100%0.00.20.40.60.8 1.0 1.2
Io[A]
η
[
%
]MIP552,Vin=100VAC,C3=47μF LED 1pcs LED 3pcs
LED 5pcs L EX-pin voltage H VDS ILED
VDS ILED
ILED
Condition A Condition B Condition C
Io L EX -pin voltage H
VDS ILED VDS ILED VDS
ILED Io