当前位置：文档库 › 128SAL-RPM中文资料

128SAL-RPM中文资料

Document Number: 28354For technical questions, contact: aluminumcaps2@https://www.wendangku.net/doc/ea823581.html,

https://www.wendangku.net/doc/ea823581.html,

Aluminum Capacitors Solid Al,

Radial Pearl Miniature

128 SAL-RPM

Vishay BCcomponents

FEATURES

?Polarized aluminum electrolytic capacitors,solid electrolyte MnO 2

?Radial leads, max. height 10mm, resin dipped, orange colored

?Extremely long useful life, 20 000hours/125 °C ?Extended high temperature range up to 175 °C

?Excellent low temperature, impedance and ESR behaviour

?Charge and discharge proof, application with 0Ωresistance allowed

?Reverse DC voltage up to 0.3 x U R allowed ?AC voltage up to 0.8 x U R allowed

APPLICATIONS

?Audio-video, automotive, industrial high temperature and telecommunication

?Smoothing, filtering and buffering

?For small power supplies, DC/DC converters

MARKING

The capacitors are marked (where possible) with the following information:?Rated capacitance (in μF)

?Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %)

?Rated voltage (in V) and category voltage if applicable ?Date code in accordance with IEC60062?Name of manufacturer

? ‘I ’ sign to indicate the negative terminal ?‘+’ sign to identify the positive terminal ?Series number

MOUNTING

When bending, cutting or straightening the leads, ensure that the capacitor body is relieved of stress.Bending after soldering must be avoided.

QUICK REFERENCE DATA

DESCRIPTION VALUE Maximum case sizes (H x W x

T in mm)10x 7x 3.5to 10x 8x 6Rated capacitance range

(E6series), C R 0.22 μF to 68μF

T olerance on C R

± 20 %Rated voltage range, U R 6.3 V to 40V

Category temperature range:U R =

6.3to 40V - 55 °C to + 85 °C U C =6.3to 25V - 55 °C to + 125 °C Endurance test at 125 °C 10 000hours Useful life at 125 °C 20 000hours Useful life at 175 °C

2000hours Useful life at 40°C, I R applied > 300 000hours Shelf life at 0V, 125 °C 500hours

Based on sectional specification

IEC 60384-4/EN 130300

Climatic category IEC 60068

55/125/56

128 SAL-RPM

Vishay BCcomponents

Aluminum Capacitors Solid Al,

Radial Pearl Miniature

https://www.wendangku.net/doc/ea823581.html, For technical questions, contact: aluminumcaps2@https://www.wendangku.net/doc/ea823581.html,

Document Number: 28354

DIMENSIONS in millimeters AND AVAILABLE FORMS

Table 1

Notes

(1) In plastic bags of 200units each.

Detailed tape dimensions see section ‘PACKAGING’.

SELECTION CHART FOR C R , U R , U C AND RELEVANT MAXIMUM CASE SIZES (H x W x T in mm)

C R (μF)U R (V) at T amb = 85 °C

6.31016

2540U C (V) at T amb = 125 °C

6.3101625250.22----10 x 7 x 3.50.33----10 x 7 x 40.47----

10 x 7 x 50.68---10 x 7 x 3.510 x 7 x 51---10 x 7 x 3.510 x 7 x 51.5---10 x 7 x 3.510 x 8 x 62.2--10 x 7 x 3.510 x 7 x 410 x 8 x 6

3.3--10 x 7 x 3.510 x 7 x 5-

4.7-10 x 7 x 3.510 x 7 x 410 x 8 x 5-6.8-10 x 7 x 3.510 x 7 x 410 x 8 x 5-1010 x 7 x 3.5

10 x 7 x 410 x 7 x 510 x 8 x 6

-15-10 x 7 x 410 x 8 x 5--2210 x 7 x 410 x 7 x 510 x 8 x 6

--3310 x 7 x 510 x 8 x 5---4710 x 8 x 510 x 8 x 6

---68

10 x 8 x 6

---

DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES

MAXIMUM CASE SIZE H x W x T (mm)CASE CODE MASS (g)PACKAGING QUANTITIES

FORM CA Note (1)FORM CB Note (1)FORM TR+FORM TFA 10x 7x 3.520≈ 0.25100010002000100010x 7x 430≈ 0.30100010002000100010x 7x 540≈ 0.35100010001000100010x 8x 550≈ 0.50100010001000100010x 8x 6

≈ 0.60

1000

Document Number: 28354For technical questions, contact: aluminumcaps2@https://www.wendangku.net/doc/ea823581.html,

https://www.wendangku.net/doc/ea823581.html,

128 SAL-RPM

Aluminum Capacitors Solid Al,

Radial Pearl Miniature

Vishay BCcomponents

TAPED PRODUCTS

Note

Unless otherwise specified, all electrical values in T able 2 apply at T amb = 20 °C to 25°C , P = 86 kPa to 106kPa, RH =45 %to 75 %.

ORDERING EXAMPLE

Maximum case size: 10 x 7 x 5mm; Form CB

Electrolytic capacitors 128 series 10 μF/16V; ± 20 %Table 2

Note

1.tan δ at 100Hz for all types <

0.10

ELECTRICAL DATA

C R rated capacitance at 100Hz, tolerance ± 20 %I R max. RMS ripple current no necessary DC applied I L5max. leakage current after 5minutes at U R tan δmax. dissipation factor at 100Hz;

ESR max./typ. equivalent series resistance at 100Hz Z

max. impedance at 100kHz

Ordering code:MAL212855109E3Former 12NC:228112855109

ELECTRICAL DATA AND ORDERING INFORMATION

U C (V)U R (V)

C R

100Hz (μF)MAXIMUM CASE SIZE H x W x T (mm)I R 100Hz 125 °C (mA)I R 10kHz 85 °C (mA)I R 100kHz 40 °C (mA)I L55min

(μA)

MAX.

ESR

100Hz (Ω)

TYP.ESR 100Hz (Ω)Z 100kHz (Ω)ORDERING CODE MAL2128.......

FORM CB FORM

FORM TR +REEL

FORM TFA AMMO 6.3 6.3

10x 7x 3.522.43205952208 2.053109E373109E323109E333109E32210x 7x 432.947087049 3.5 1.053229E373229E323229E333229E33310x 7x 565.459511005 6.120.7053339E373339E323339E333339E34710x 8x 5118.474013607 4.320.5053479E373479E323479E333479E36810x 8x 6153.0800165011 3.0 1.50.4053689E373689E323689E333689E31010

4.710x 7x 3.516.123042524316 3.0054478E374478E324478E334478E36.810x 7x 3.518.927050023012 2.2054688E374688E324688E334688E31010x 7x 421.73105733209 1.7054109E374109E324109E334109E31510x 7x 427.33907204147 1.2054159E374159E324159E334159E32210x 7x 551.747087069 3.50.9054229E374229E324229E334229E33310x 8x 581.65109408 6.120.6054339E374339E324339E334339E34710x 8x 610

5.4620114012 4.3 1.50.4054479E374479E324479E334479E31616

2.210x 7x

3.51

4.020********* 4.5055228E375228E325228E335228E33.310x 7x 3.516.123042526126 3.3055338E375338E325338E335338E34.710x 7x 418.927050024314 2.3055478E375478E325478E335478E36.810x 7x 422.432059033011 1.6555688E375688E325688E335688E31010x 7x 542.93907204206 1.1055109E375109E325109E335109E31510x 8x 571.244582061450.8555159E375159E325159E335159E32210x 8x 686.751094099 3.50.6555229E375229E325229E335229E32525

0.6810x 7x 3.57.711020022958517.0056687E376687E326687E336687E3110x 7x 3.59.113024022007112.5056108E376108E326108E336108E31.510x 7x 3.510.815528521354810.0056158E376158E326158E336158E32.210x 7x 413.6195360291347.0056228E376228E326228E336228E33.310x 7x 516.123042526119 5.2056338E376338E326338E336338E34.710x 8x 525.327050034314 3.5056478E376478E326478E336478E36.810x 8x 652.731057043011 2.7056688E376688E326688E336688E31010x 8x 664.83606606209 2.0056109E376109E326109E336109E32540

0.2210x 7x 3.5 4.260115291027527.0057227E377227E327227E337227E30.3310x 7x 4 5.375140*********.0057337E377337E327337E337337E30.4710x 7x 510.495175243011415.0057477E377477E327477E337477E30.6810x 7x 512.111020522958910.0057687E377687E327687E337687E3110x 8x 520.01252302200457.0057108E377108E327108E337108E31.510x 8x 625.5150280213535 5.5057158E377158E327158E337158E32.2

10x 8x 633.1

195

360

4.20

57228E3

77228E327228E3

37228E3

128 SAL-RPM

Vishay BCcomponents

Aluminum Capacitors Solid Al,

Radial Pearl Miniature

https://www.wendangku.net/doc/ea823581.html, For technical questions, contact: aluminumcaps2@https://www.wendangku.net/doc/ea823581.html,

Document Number: 28354

VOLTAGE

Notes

(1) Applying the maximum RMS ripple current given in Table

2 will

cause a device temperature of 138°C

(2) The 100

kHz values in T able 2 for other temperatures are to be

calculated with the above I R multipliers:

ADDITIONAL ELECTRICAL DATA

PARAMETER CONDITIONS

VALUE

Voltage Surge voltage U s ≤1.15 x U R Reverse voltage

U rev < 0.3 x U R Maximum peak AC voltage Reverse voltage applied ≤ 2V

Maximum peak AC voltage,without reverse voltage applied

T amb ≤85°C:at f ≤0.1Hz 0.30x U R at 0.1Hz 50Hz

0.80x U R 85°C 50Hz

0.40x U R Inductance

Equivalent series inductance (ESL)

Case sizes 10x 7x 3.5mm to 10x 7x 5mm typ. 9 nH to 14nH Case sizes 10x 8x 5mm and 10x 8x 6mm typ. 11 nH to 16nH All case sizes

max. 20nH Dissipation

Maximum power dissipation Case sizes 10x 7x 3.5mm to 10x 7x 5mm P 125=88mW Case sizes 10x 8x 5 mm and 10x 8x 6mm

P 125=104mW Current

Maximum leakage current After 5minutes at U R and T amb =25°C I L5≤0.025 C R x U R or 2μA

whichever is greater; see T able 2

Typical leakage current

15s at U R and T amb =25°C:U R =6.3to 16V ≈ 0.2 x value stated in Table 2 U R =25to 40V

≈ 0.1 x value stated in T able 2RIPPLE CURRENT (I R )

PARAMETER T amb

25°C 40°C 65°C 85°C 105°C 125°C I R multiplier 1.1

1.0

0.88

0.75

0.59

0.37

Document Number: 28354For technical questions, contact: aluminumcaps2@https://www.wendangku.net/doc/ea823581.html,

https://www.wendangku.net/doc/ea823581.html,

128 SAL-RPM

Aluminum Capacitors Solid Al,

Radial Pearl Miniature

Vishay BCcomponents

CAPACITANCE (C)

LEAKAGE CURRENT

TYPICAL CAPACITANCE CHANGE AFTER ENDURANCE TEST AT T AMB =125°C

TYPICAL LEAKAGE CURRENT CHANGE

AFTER ENDURANCE TEST AT T AMB =125°C

128 SAL-RPM

Vishay BCcomponents

Aluminum Capacitors Solid Al,

Radial Pearl Miniature

https://www.wendangku.net/doc/ea823581.html, For technical questions, contact: aluminumcaps2@https://www.wendangku.net/doc/ea823581.html,

Document Number: 28354

DISSIPATION FACTOR (tan δ)

TYPICAL tan δ CHANGE AFTER

ENDURANCE TEST AT T amb = 125 °C

EQUIVALENT SERIES RESISTANCE (ESR)

Document Number: 28354For technical questions, contact: aluminumcaps2@https://www.wendangku.net/doc/ea823581.html,

https://www.wendangku.net/doc/ea823581.html,

128 SAL-RPM

Aluminum Capacitors Solid Al,

Radial Pearl Miniature

Vishay BCcomponents

EQUIVALENT SERIES RESISTANCE (ESR)

IMPEDANCE (Z)

128 SAL-RPM

Vishay BCcomponents

Aluminum Capacitors Solid Al,

Radial Pearl Miniature

https://www.wendangku.net/doc/ea823581.html, For technical questions, contact: aluminumcaps2@https://www.wendangku.net/doc/ea823581.html,

Document Number: 28354

IMPEDANCE (Z)

Document Number: 28354For technical questions, contact: aluminumcaps2@https://www.wendangku.net/doc/ea823581.html,

https://www.wendangku.net/doc/ea823581.html,

128 SAL-RPM

Aluminum Capacitors Solid Al,

Radial Pearl Miniature

Vishay BCcomponents

Table 3

TEST PROCEDURES AND REQUIREMENTS

TEST

PROCEDURE (quick reference)

REQUIREMENTS

NAME OF TEST REFERENCE Endurance

IEC 60384-4/EN130300subclause 4.13

T amb =125°C;

U R =6.3 V to 25V with U R applied; U R =40V with U C applied;10 000hours

ΔC/C:± 10 %

tan δ≤1.2 x spec. limit Z ≤1.2 x spec. limit I L5≤spec. limit

Useful life

CECC 30302subclause 1.8.1

T amb =125°C; I R applied and:

U R =6.3 V to 25V with U R applied;U R =40V with U C applied;20 000hours

ΔC/C:± 15 %

tan δ≤1.5 x spec. limit Z ≤1.5 x spec. limit I L5≤spec. limit no short or open circuit,no visible damage

total failure percentage:< 1%

Shelf life (storage at high temperature)

IEC 60384-4/EN130300subclause 4.17T amb =125°C; no voltage applied;500hours

ΔC/C:± 10 %

tan δ≤1.2 x spec. limit I L5≤spec. limit

Charge and discharge

IEC 60384-4-2subclause 9.21

106cycles without series resistance:0.5s to U R ; 0.5s to ground

ΔC/C:± 5 %

no short or open circuit,no visible damage

Solvent resistance

IEC 60068-2-45,test XA IEC 60653

immersion: 5 min ± 0.5min with or without ultrasonic at 55 °C ± 5°C

solvents: demineralized water and/or calgonite solution (20g/l)

visual appearance not affected

Extended vibration

IEC 60068-2-6test Fc

10 Hz to 2000Hz; 1.5mm or 20g;1octave/min; 3directions;

1sweep per direction; no voltage applied

no intermittent contacts no breakdown no open circuiting no mechanical damage

ΔC/C:± 5 %

tan δ≤1.2 x spec. limit Z ≤1.2 x spec. limit I L5≤1.5 x spec. limit

Shock

IEC 60068-2-27test Ea

half-sine or sawtooth pulse shape; 50 g; 11ms; 3successive shocks in each direction of 3mutually perpendicular axes; no voltage applied

no intermittent contacts no breakdown no open circuiting no mechanical damage

ΔC/C:± 5 %

tan δ≤1.2 x spec. limit Z ≤1.2 x spec. limit I L5≤1.5 x spec. limit

Passive flammability

IEC 60695-2-2

capacitor mounted to a vertical printed-circuit board,

one flame on capacitor body; T amb =20 °C to 25°C;test duration =20 s

after removing the test flame from the capacitor, the capacitor must not continue to burn for more than 15s; no burning particles must drop from the sample

Disclaimer Legal Disclaimer Notice

Vishay

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

元器件交易网https://www.wendangku.net/doc/ea823581.html,

Document Number: https://www.wendangku.net/doc/ea823581.html,