General Description
The MAX6035 is a high-voltage, precision micropower voltage reference. This three-terminal device is available with output voltage options of 2.5V, 3.0V, and 5.0V. It is an excellent upgrade for industry-standard devices such as the REF02 and REF43. The MAX6035 offers 14x lower power than the REF02 and 5x lower power than the REF43, as well as a reduced package size from an 8-pin SO to a 3-pin SOT23. The MAX6035 features a proprietary temperature coefficient curvature-correction circuit and laser-trimmed, thin-film resistors that result in a very low temperature coefficient of 25ppm/°C (max) and an initial accuracy of ±0.2% (max).
The MAX6035 typically draws only 73μA of supply cur-rent and can source 10mA or sink 2mA of load current.Unlike conventional shunt-mode (two-terminal) refer-ences that waste supply current and require an external resistor, this device offers a supply current that is virtu-ally independent of the supply voltage and does not require an external resistor. Additionally, this internally compensated device does not require an external com-pensation capacitor, but is also stable with capacitive loads up to 5μF. Eliminating the external compensation capacitor saves valuable board area in space-critical applications. The supply independent, ultra-low supply current makes this device ideal for battery-operated,high-performance systems.
The MAX6035 is available in a 3-pin SOT23 package and is specified for operation from -40°C to +125°C.
Applications
Features
o Wide Supply Voltage Range: Up to 33V o 25ppm/°C (max) Temperature Coefficient (-40°C to +85°C)
o ±0.2% (max) Initial Accuracy
o 95μA (max) Quiescent Supply Current o 10mA Source Current, 2mA Sink Current o No Output Capacitor Required
o Stable with Capacitive Loads up to 5μF
MAX6035
High-Supply-Voltage, Precision Voltage Reference in SOT23
________________________________________________________________Maxim Integrated Products 1
Ordering Information
19-2606; Rev 3; 11/06
For pricing, delivery, and ordering information,please contact Maxim/Dallas Direct!at 1-888-629-4642, or visit Maxim’s website at https://www.wendangku.net/doc/e54558730.html,.
Typical Operating Circuit
4mA to 20mA Industrial
Control Loops
Li+ Battery Chargers 12-Bit A/D and D/A Converters
Digital Multimeters
Portable Data-Acquisition Systems
Low-Power Test Equipment
Note: The 3-pin SOT23 package code is U3-1. The 8-pin SO package code is S8-2.
M A X 6035
High-Supply-Voltage, Precision Voltage Reference in SOT23
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS —MAX6035_AUR25 and MAX6035ESA25 (2.5V)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
(Voltages referenced to GND)
IN............................................................................-0.3V to +36V OUT .............................................................-0.3V to (V IN + 0.3V)OUT Short-Circuit Duration to GND or IN (Note 1).....Continuous Current into Any Pin..........................................................±20mA Continuous Power Dissipation
3-Pin SOT23 (derate 4.0mW/°C above +70°C)............320mW 8-Pin SO (derate 5.9mW/°C above +70°C)...............470.6mW Operating Temperature Range:
MAX6035ESA ..................................................-40°C to +85°C MAX6035_AUR..............................................-40°C to +125°C Storage Temperature Range.............................-65°C to +150°C Junction Temperature......................................................+150°C Lead Temperature (soldering, 10s).................................+300°C
Note 1: Continuous power dissipation should also be observed.
MAX6035
High-Supply-Voltage, Precision Voltage Reference in SOT23
ELECTRICAL CHARACTERISTICS —MAX6035_AUR25 and MAX6035ESA25 (2.5V) (continued)
(V = 5V, I = 0, T = T to T , unless otherwise noted. Typical values are at T = +25°C.) (Note 2)
(V = 5V, I = 0, T = T to T , unless otherwise noted. Typical values are at T = +25°C.) (Note 2)
M A X 6035
High-Supply-Voltage, Precision Voltage Reference in SOT23
ELECTRICAL CHARACTERISTICS —MAX6035_AUR30 (3.0V) (continued)
(V IN = 5V, I OUT = 0, T A = T MIN to T MAX , unless otherwise noted. Typical values are at T A = +25°C.) (Note 2)
ELECTRICAL CHARACTERISTICS —MAX6035_AUR50 (5.0V)
MAX6035
High-Supply-Voltage, Precision Voltage Reference in SOT23
_______________________________________________________________________________________5
ELECTRICAL CHARACTERISTICS —MAX6035_AUR50 (5.0V) (continued)
(V IN = 5V, I OUT = 0, T A = T MIN to T MAX , unless otherwise noted. Typical values are at T A = +25°C.) (Note 2)
Note 3:Temperature Coefficient is measured by the “box ” method, i.e., the maximum ?V OUT is divided by the maximum ?T.Note 4:Line and load regulation are measured with pulses and do not include output voltage fluctuation due to die-temperature
changes.
Note 5:Thermal Hysteresis is defined as the change in the output voltage at T A = +25°C before and after cycling the device from
T MAX to T MIN .
Note 6:Guaranteed by design.
Note 7:Although the source current is guaranteed to be 10mA, exercise caution to ensure that the package ’s absolute power dissi-pation rating is not exceeded.
M A X 6035
High-Supply-Voltage, Precision Voltage Reference in SOT236_______________________________________________________________________________________
Typical Operating Characteristics
(V IN = 5V for MAX6035AAUR25/MAX6035AAUR30, V IN = 15V for MAX6035AAUR50, I OUT = 0, T A = +25°C, unless otherwise noted.)
MAX6035
LOAD REGULATION (V OUT = 5V)
LOAD CURRENT (mA)
O U T P U T V O L T A G E (V )8
6
4
2
4.995
4.9964.9974.9984.999
5.0005.001
4.994
-2
10
MAX6035
LOAD REGULATION (V OUT = 3V)
LOAD CURRENT (mA)
O U T P U T V O L T A G E (V )8
6
4
2
2.99602.9965
2.99702.99752.99802.99852.99902.9995
3.00003.0005
2.9955
-2
10
MAX6035
LOAD REGULATION (V OUT = 2.5V)
LOAD CURRENT (mA)O U T P U T V O L T A G E (V )86
4
2
2.49702.49752.49802.49852.49902.49952.50002.50052.50102.4965
-2
10
MAX6035
LINE REGULATION (V OUT = 5V)
INPUT VOLTAGE (V)
O U T P U T V O L T A G E (V )
30
26
22
18
14
10
4.9975
4.9980
4.9985
4.99904.9995
4.9970
6
34
MAX6035
LINE REGULATION (V OUT = 3V)
INPUT VOLTAGE (V)
O U T P U T V O L T A G E (V )28
22
16
10
2.99652.99702.99752.99802.99852.99902.9995
3.00003.00052.9960
4
34
MAX6035
LINE REGULATION (V OUT = 2.5V)
INPUT VOLTAGE (V)
O U T P U T V O L T A G E (V )2822
10
16
2.49752.49802.49852.49902.49952.50002.50052.50102.4970
4
34
MAX6035AAUR50
OUTPUT VOLTAGE TEMPERATURE DRIFT
TEMPERATURE (°C)
O U T P U T V O L T A G E (V )110
85
60
35
10
-15
5.0005.0015.0025.0035.0045.005
4.999
4.998
4.997
-40
MAX6035AAUR30
OUTPUT VOLTAGE TEMPERATURE DRIFT
TEMPERATURE (°C)
O U T P U T V O L T A G E (V )
110
85
60
35
10
-15
2.9972.999
3.0013.003
2.995
2.993
-40
MAX6035AAUR25
OUTPUT VOLTAGE TEMPERATURE DRIFT
TEMPERATURE (°C)
O U T P U T V O L T A G E (V )110
85
60
35
10
-15
2.50102.50052.50002.49952.50152.50202.50252.50302.50352.4990
-40
MAX6035
High-Supply-Voltage, Precision Voltage Reference in SOT23
_______________________________________________________________________________________
7
MAX6035SUPPLY CURRENT
vs. INPUT VOLTAGE (V OUT = 3V)
INPUT VOLTAGE (V)
S U P P L Y C U R R E N T (μA )
28
22
16
10
75
80
85
909570
4
34
INPUT VOLTAGE (V)
S U P P L Y C U R R E N T (μA )
30
24
18
12
75
80
85
9095
70
6
MAX6035SUPPLY CURRENT
vs. INPUT VOLTAGE (V OUT = 5V)
0.01
0.1
1
10
100
1000
MAX6035
OUTPUT IMPEDANCE vs. FREQUENCY (V OUT = 2.5V)
FREQUENCY (kHz)
O U T P U T I M P E D A N C E (?)
4000100200
3000.001
0.1
10
1000
MAX6035
OUTPUT IMPEDANCE vs. FREQUENCY (V OUT = 3V)
FREQUENCY (kHz)
O U T P U T I M P E D A N C E (?)
400
0100
200
300
0.01
0.1
1
10
100
1000
MAX6035
OUTPUT IMPEDANCE vs. FREQUENCY (V OUT = 5V)
FREQUENCY (kHz)
O U T P U T I M P E D A N C E (?)
300050
150100250
200MAX6035SUPPLY CURRENT
vs. INPUT VOLTAGE (V OUT = 2.5V)
INPUT VOLTAGE (V)
S U P P L Y C U R R E N T (μA )
28
22
16
10
70758085909565
4
34
0.001
0.1101000
MAX6035
POWER-SUPPLY REJECTION RATIO vs. FREQUENCY (V OUT = 5V)
FREQUENCY (kHz)
P S R R (d B )
-120
-100-80-60-40-200.001
0.1
10
1000MAX6035
POWER-SUPPLY REJECTION RATIO vs. FREQUENCY (V OUT = 3V)
FREQUENCY (kHz)P S R R (d B )
-120
-100-80-60-40
-200.001
0.1
10
1000
MAX6035
POWER-SUPPLY REJECTION RATIO vs. FREQUENCY (V OUT = 2.5V)
FREQUENCY (kHz)
P S R R (d B )
-120
-100-80-60-40-20Typical Operating Characteristics (continued)
(V IN = 5V for MAX6035AAUR25/MAX6035AAUR30, V IN = 15V for MAX6035AAUR50, I OUT = 0, T A = +25°C, unless otherwise noted.)
M A X 6035
High-Supply-Voltage, Precision Voltage Reference in SOT238_______________________________________________________________________________________
MAX6035 toc19
1s/div
10μV/div
MAX6035
0.1Hz to 10Hz OUTPUT NOISE
(V OUT = 2.5V)
MAX6035 toc201s/div 10μV/div MAX6035
0.1Hz to 10Hz OUTPUT NOISE
(V OUT = 3V)
MAX6035 toc21
1s/div
20μV/div
MAX6035
0.1Hz to 10Hz OUTPUT NOISE
(V OUT
= 5V)
MAX6035 toc22
100ms/div 50μV/div MAX6035
10Hz to 1kHz OUTPUT NOISE
(V OUT
= 2.5V)
MAX6035 toc23
100ms/div 50μV/div MAX6035
10Hz to 1kHz OUTPUT NOISE
(V OUT
= 3V)
MAX6035 toc24
100ms/div
100μV/div
MAX6035
10Hz to 1kHz OUTPUT NOISE
(V OUT = 5V)
10μs/div 0V 0V
V OUT 1V/div V IN 5V/div MAX6035
TURN-ON TRANSIENT (V OUT = 2.5V)
C L = 50pF
10μs/div V OUT 1V/div V IN 5V/div MAX6035
TURN-ON TRANSIENT (V OUT = 3V)
C L = 50pF
0V
0V
40μs/div
V OUT 2V/div
V IN 10V/div
MAX6035
TURN-ON TRANSIENT (V OUT = 5V)
C L = 50pF
Typical Operating Characteristics (continued)
(V IN = 5V for MAX6035AAUR25/MAX6035AAUR30, V IN = 15V for MAX6035AAUR50, I OUT = 0, T A = +25°C, unless otherwise noted.)
MAX6035
High-Supply-Voltage, Precision Voltage Reference in SOT23
_______________________________________________________________________________________9
MAX6035 toc2840μs/div
V L 10V/div
V OUT
AC-COUPLED 100mV/div
MAX6035
LOAD TRANSIENT (V OUT = 2.5V)
(I OUT = ±250μA, C L = 0, R L = 10k ?) (Figure 1)
MAX6035 toc2920μs/div
V L 10V/div
V OUT
AC-COUPLED 200mV/div MAX6035
LOAD TRANSIENT (V OUT = 3V)
(I OUT = ±250μA, C L = 0, R L = 12k ?) (Figure 1)
MAX6035 toc30
20μs/div
V L 10V/div
V OUT
AC-COUPLED 100mV/div
MAX6035
LOAD TRANSIENT (V OUT = 5V)
(I OUT = ±250μA, C L = 0, R L = 20k ?) (Figure 1)
MAX6035 toc31
100μs/div
V L 5V/div
V OUT
AC-COUPLED
20mV/div MAX6035
LOAD TRANSIENT (V OUT = 2.5V)(I OUT = ±250μA, C L = 1μF, R L = 10k ?) (Figure 1)
MAX6035 toc32
100μs/div
V L 10V/div
V OUT
AC-COUPLED
20mV/div MAX6035
LOAD TRANSIENT (V OUT = 3V)
(I OUT = ±250μA, C L = 1μF, R L = 12k ?) (Figure 1)
MAX6035 toc33
100μs/div
V L 10V/div
V OUT
AC-COUPLED
20mV/div
MAX6035
LOAD TRANSIENT (V OUT = 5V)
(I OUT = ±250μA, C L = 1μF, R L = 20k ?) (Figure 1)
MAX6035 toc34
10μs/div
V L 5V/div
V OUT
AC-COUPLED 500mV/div MAX6035
LOAD TRANSIENT (V OUT = 2.5V)
(I OUT = ±2mA, C L = 0, R L = 1.25k ?) (Figure 1)
MAX6035 toc35
40μs/div
V L 5V/div
V OUT
AC-COUPLED 500mV/div MAX6035
LOAD TRANSIENT (V OUT = 3V)
(I OUT = ±2mA, C L = 0, R L = 1.5k ?) (Figure 1)
MAX6035 toc36
20μs/div
V L 10V/div
V OUT
AC-COUPLED 500mV/div
MAX6035
LOAD TRANSIENT (V OUT = 5V)
(I OUT = ±2mA, C L = 0, R L = 2.5k ?) (Figure 1)
Typical Operating Characteristics (continued)
(V IN = 5V for MAX6035AAUR25/MAX6035AAUR30, V IN = 15V for MAX6035AAUR50, I OUT = 0, T A = +25°C, unless otherwise noted.)
M A X 6035
High-Supply-Voltage, Precision Voltage Reference in SOT2310______________________________________________________________________________________
MAX6035 toc37
40μs/div
V L 5V/div
V OUT
AC-COUPLED 100mV/div MAX6035
LOAD TRANSIENT (V OUT = 2.5V)(I OUT = ±2mA, C L = 1μF, R L = 1.25k ?) (Figure 1)
MAX6035 toc38
100μs/div
V L 10V/div
V OUT
AC-COUPLED 100mV/div MAX6035
LOAD TRANSIENT (V OUT = 3V)
(I OUT = ±2mA, C L = 1μF, R L = 1.5k ?) (Figure 1)
MAX6035 toc39
200μs/div
V L 10V/div
V OUT
AC-COUPLED
20mV/div
MAX6035
LOAD TRANSIENT (V OUT = 5V)
(I OUT = ±2mA, C L = 1μF, R L = 2.5k ?) (Figure 1)
MAX6035 toc40
20μs/div
V L 5V/div
V OUT
AC-COUPLED 500mV/div
MAX6035
LOAD TRANSIENT (V OUT = 2.5V)
(I OUT = 0 to 10mA, C L = 0, R L = 250?) (Figure 2)
MAX6035 toc41
20μs/div
V L 5V/div
V OUT
AC-COUPLED 500mV/div
MAX6035
LOAD TRANSIENT (V OUT = 3V)
(I OUT = 0 to 10mA, C L = 0, R L = 300?) (Figure 2)
MAX6035 toc42
200μs/div
V L 5V/div
V OUT
AC-COUPLED
20mV/div
MAX6035
LOAD TRANSIENT (V OUT = 5V)
(I OUT = 0 to 10mA, C L = 0, R L = 500?) (Figure 2)
Typical Operating Characteristics (continued)
(V IN = 5V for MAX6035AAUR25/MAX6035AAUR30, V IN = 15V for MAX6035AAUR50, I OUT = 0, T A = +25°C, unless otherwise noted.)
MAX6035
High-Supply-Voltage, Precision Voltage Reference in SOT23
______________________________________________________________________________________11
MAX6035 toc43100μs/div
V L 5V/div
V OUT
AC-COUPLED 100mV/div
MAX6035
LOAD TRANSIENT (V OUT = 2.5V)
(I OUT = 0 to 10mA, C L = 1μF, R L = 250?) (Figure 2)
MAX6035 toc44100μs/div
V L 5V/div
V OUT
AC-COUPLED 100mV/div MAX6035
LOAD TRANSIENT (V OUT = 3V)
(I OUT = 0 to 10mA, C L = 1μF, R L = 300?) (Figure 2)
MAX6035 toc45
100μs/div
V L 5V/div
V OUT
AC-COUPLED 100mV/div
MAX6035
LOAD TRANSIENT (V OUT = 5V)
(I OUT = 0 to 10mA, C L = 1μF, R L = 500?) (Figure 2)
MAX6035 toc46
4μs/div V OUT
AC-COUPLED 100mV/div
V IN
500mV/div
MAX6035
LINE TRANSIENT (V OUT = 2.5V)
C L = 0
MAX6035 toc47
10μs/div V OUT
AC-COUPLED 100mV/div
V IN
500mV/div
MAX6035
LINE TRANSIENT (V OUT = 3V)
C L = 0
Typical Operating Characteristics (continued)
(V IN = 5V for MAX6035AAUR25/MAX6035AAUR30, V IN = 15V for MAX6035AAUR50, I OUT = 0, T A = +25°C, unless otherwise noted.)
MAX6035 toc48
4μs/div
V OUT
AC-COUPLED 100mV/div
V IN
500mV/div
MAX6035
LINE TRANSIENT (V OUT = 5V)
C L = 0
Figure 1. Load-Transient Test Circuit Figure 2. Load-Transient Test Circuit
M A X 6035
High-Supply-Voltage, Precision Voltage Reference in SOT2312______________________________________________________________________________________
Applications Information
Input Bypassing
For the best line-transient performance, decouple the input with a 0.1μF ceramic capacitor as shown in the Typical Operating Circuit . Locate the capacitor as close to the device as possible. Where transient perfor-mance is less important, no capacitor is necessary.
Output/Load Capacitance
Devices in the MAX6035 family do not require any out-put capacitance for frequency stability. In applications where the load or the supply can experience step changes, an output capacitor of at least 0.1μF reduces the amount of overshoot (undershoot) and improves the circuit ’s transient response. Many applications do not require an external capacitor, and the MAX6035 family can offer a significant advantage in these applications when board space is critical.
Supply Current
The quiescent supply current of the MAX6035 series-mode family is typically 73μA and is virtually indepen-dent of the supply voltage, with only a 0.7μA/V (max)variation with supply voltage. In contrast, the quiescent current of a shunt-mode reference is a function of the input voltage due to a series resistor connected to the
power supply. Additionally, shunt-mode references have to be biased at the maximum expected load cur-rent, even if the load current is not present at the time.In the MAX6035 family, the load current is drawn from the input voltage only when required, so supply current is not wasted and efficiency is maximized at all input voltages. This improved efficiency reduces power dissi-pation and extends battery life.
Thermal Hysteresis
Thermal hysteresis is the change of output voltage at T A = +25°C before and after the device is cycled over its entire operating temperature range. The typical tem-perature hysteresis value is 135ppm.
Turn-On Time
These devices typically turn on and settle to within 0.1% of their final value in 240μs. Increased output capacitance also increases turn-on time.
Temperature Coefficient vs.Operating Temperature Range
for a 1 LSB Maximum Error
In a data converter application, the reference voltage of the converter must stay within a certain limit to keep the error in the data converter smaller than the resolution limit through the operating temperature range. Figure 3shows the maximum allowable reference-voltage tem-perature coefficient to keep the conversion error to less than 1LSB, as a function of the operating temperature range (T MAX - T MIN ) with the converter resolution as a parameter. The graph assumes the reference-voltage temperature coefficient as the only parameter affecting accuracy.
In reality, the absolute static accuracy of a data con-verter is dependent on the combination of many para-meters such as integral nonlinearity, differential nonlinearity, offset error, gain error, as well as voltage reference changes
Pin Description
MAX6035
High-Supply-Voltage, Precision Voltage Reference in SOT23
______________________________________________________________________________________13
Figure 3. Temperature Coefficient vs. Operating Temperature Range for a 1 LSB Maximum Error
TEMPERATURE COEFFICIENT (ppm/°C)
1
10
100
16 BIT 14 BIT 12 BIT 10 BIT 8 BIT
0.01
0.110100
1000110,00018 BIT 20 BIT OPERATING TEMPERATURE RANGE (T MAX - T MIN ) (°C)
Chip Information
TRANSISTOR COUNT: 84PROCESS: BiCMOS
M A X 6035
High-Supply-Voltage, Precision Voltage Reference in SOT23
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,go to https://www.wendangku.net/doc/e54558730.html,/packages .
MAX6035
High-Supply-Voltage, Precision Voltage Reference in SOT23
Maxim cannot assume responsibility f or use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________15?2006 Maxim Integrated Products
is a registered trademark of Maxim Integrated Products, Inc.
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to https://www.wendangku.net/doc/e54558730.html,/packages .)
Revision History
Pages changed at Rev 2: 1, 2, 3, 12, 15Pages changed at Rev 3: 1, 2, 15