博士英文简历Curriculum Vitae

Fu Zhao, Ph.D.

Associate Professor

School of Mechanical Engineering and

Division of Environmental and Ecological Engineering

Purdue University

585 Purdue Mall, West Lafayette, Indiana 47907

Phone: (765) 494-6637

Fax: (765)494-0539

E-mail: fzhao@https://www.wendangku.net/doc/ee7293961.html,

C ITIZENSHIP

Canadian (Permanent Resident of U.S.)

E DUCATION

Ph.D. Mechanical Engineering, Department of Mechanical Engineering,

The University of Michigan at Ann Arbor, February 2005

Master of Science Electrical Eng.-Systems, Dept. of Electrical Eng. and Computer Science,

The University of Michigan at Ann Arbor, December 2001 Master of Engineering Thermal Engineering, Department of Thermal Engineering,

Tsinghua University, Beijing, China, July 1996

Bachelor of Science Environmental Engineering, Department of Environmental Engineering,

Thermal Engineering, Department of Thermal Engineering,

Tsinghua University, Beijing, China, July, 1993

E XPERIENCE

08/2013-present Associate Professor

School of Mechanical Engineering & Division of Environmental and Ecological

Engineering, Purdue University

01/2007-07/2013 Assistant Professor

School of Mechanical Engineering & Division of Environmental and Ecological

Engineering, Purdue University

02/2005-12/2006 Research Fellow

Dept. of Civil and Environmental Engineering, University of Michigan 01/2000-01/2005 Graduate Student Research Assistant

Dept. of Mechanical Engineering, University of Michigan 01/2004-04/2004 Graduate Student Instructor

Dept. of Mechanical Engineering, University of Michigan 01/2003-04/2003 Graduate Student Instructor

Dept. of Mechanical Engineering, University of Michigan 08/1996-08/1999 Research Engineer

State Key Laboratory of Clean Coal Combustion, Beijing, China 09/1994-07/1996 Research Assistant

Department of Thermal Engineering, Tsinghua University

R ESEARCH AND C URRICULUM G RANTS

Zhao, F (PI), Steinbuks, J. (co-PI), Understanding the economic and environmental consequences of widespread deployment of thin film solar photovoltaics, NSF, 08/15/2013-07/31/2016,$298,388.

Zhao, F., (PI), Sutherland, J.W. (co-PI), Sustainability Assessment of Metal Processing, The

Sustainability Consortium, 02/01/2013-03/31/2013, $19,995.

Handwerker, C. (PI), Zhao, F. (co-PI), Sutherland, J.W. (co-PI), Iyer, A. (co-PI), DOE Critical Materials Hub, subcontract to Ames Laboratory, 03/01/2013-12/31/2017, $2.6 million.

Zhao, F. (PI), Handwerker, C. (co-PI), Recycling of Liquid Crystal Displays for Maximum Resource Recovery, EPA, 08/14/2012-07/31/2013, $14,938.

Handwerker, C. (PI), IGERT: Global Traineeship in Sustainable Electronics, NSF, 07/01/2012-

06/30/2017, $3.2 million, as senior personnel.

Zhao, F. (PI), Xiang, C., Handwerker, C., Steinbuks, J., “Economic and Environmental Consequences of Widespread Deployment of Solar Photovoltaics”, Purdue Global Policy Research Institute, 02/01/2012-4/30/2013, $39,858.

Zhao, F. (PI), Sutherland, J.W. (co-PI), Development of a Unit Process Life Cycle Inventory for Forging Processes, General Dynamics, 02/01/2012-08/31/2012, $5,785.

Zhao, F. (PI), Sutherland, J.W. (co-PI), “Wind Energy and Sustainable Energy Solutions”, Wichita State University, 01/01/2011-02/19/2012, $10,572.

Zhao, F., “Environmental Analysis of Renewable Energy Systems”, Division of Ecological and

Environmental Engineering Curriculum Development Grant, 05/15/2011-05/14/2012, $13,000.

Ramani, K. (PI), Zhao, F. (co-PI), Sutherland, J.W. (co-PI), Integrating Design and Manufacturing Considerations Towards Sustainable Decision Making, NSF CMMI 1100619, 05/01/2011-04/30/2014, $418,284.

Zhao, F. (PI), Sutherland, J.W. (co-PI), Enterprise Carbon Footprint Reduction, Biomet Inc., $34,900, 11/01/2010-08/31/2011.

Zhao, F., Exploring Collaboration Opportunity with Tsinghua University for Division of Environmental and Ecological Engineering, $2,800, Purdue International Program, 11/01/2010-07/31/2011.

Hua, I., (PI), REU Site: Tackling Some of the Grand Challenges of Engineering, NSF EEC1004974, 06/01/2010-05/31/2013, $282,348, as senior personnel.

Handwerker, C. (PI), Zhao, F (co-PI), Sutherland, J. (co-PI), Youngblood, J. (co-PI), Iyer, A. (co-PI), Planning Grant: I/UCRC for Resource Recovery and Recycling, NSF IIP 1035027, 05/15/2010-

04/30/2013, $13,000.

Qu, M. (PI), Zhao, F. (co-PI), Enabling Economic and Environmental Sustainability Assessment of Solar Thermal Systems via Temporally and Spatially Explicit Life Cycle Analysis, NSF CBET 1034348,

07/15/2010-06/30/2013, $299,417.

Zhao, F (PI), Ramani, K. (co-PI), Enable Project Based Learning for Eco-Design: Method Development and Curriculum Reform, NSF EEC0935074, 09/01/2009-08/31/2012, $150,000.

Zhao, F., Gasification of Heterogeneous Carbonaceous Residues for Liquid Fuels – Integrated Multi-scale Analysis of Technical & Environmental Challenges, Purdue Research Foundation, $16,750, 07/01/2009-12/31/2010.

Handwerker, C. (PI), Zhao, F., (co-PI), Cooper, H.K. (co-PI), Environmentally Sound Disassembly and Recycling of LCD TVs, $10,000, Electronics Take back Consortium, 2009.

Zhao, F (PI) and Nies, L (co-PI), “EEE555 Life Cycle Assessment: Principals and Applications Module for DEEE Students”, Division of Ecol ogical and Environmental Engineering Curriculum Development Grant, 2008, $10,000.

Zhao, F. (PI), Development of Soybean Oil Lubricants for Metalworking Applications, Indiana Soybean Alliance, 05/01/2008-04/30/2009, $30,000.

Zhao, F, Eco-efficiency Improvement for Cloth Washer and Dryers, Whirlpool Corporation, Spring 2008, $5,000.

Zhao, F., Characterization of Waste Streams from Thermochemcial Conversion of Biomass for Biofuel Production, Eissenmann Corporation, 07/01/2008-08/31/2008, $2,000

Hua, I (PI), Zhao, F et al. (co-PI), Building Vision, Communication, and Research Capacity in the Global Sustainable Industrial Systems Signature Area, $10,000, College of Engineering, Purdue University, 2008. P UBLICATIONS/P RESENTATIONS

Journal Publication (Total published/accepted: 35; under review: 3)

Under Review (Total 3)

1.Wilson, J.M., Piya C., Murray, V., Shin, Y., Zhao, F., Ramani, K., Laser-Based Remanufacturing of

Engineering Components and Its Energy and Environmental Impact Analysis, under review, Journal of Laser Applications.

2.Ramanujan, D., Choi, J.K., Bernstein, W.Z., Zhao, F., Ramani, K., Multi Criteria Decision Analysis

under Uncertain Preferences for Sustainable Product Design, under review, ASME Journal of

Mechanical Design.

3.Sharma, A., Zhao, F., Sutherland, J.W., Econological Scheduling of Manufacturing Enterprise

Running with Time-of-use Electricity Tariff, under review, Journal of Industrial Ecology.

Published/In Press based on Work at Purdue (Total 19)

1.Haapala, K., Zhao, F., Camelio, J., Sutherland, J.W., Skerlos, S.J., Dornfeld, D., Jawair, I.S.,

Clarens, A.F., Rickli, J., A Review of Engineering Research in Sustainable Manufacturing, to

appear, ASME Journal of Manufacturing Science and Engineering.

2.Kou, N., Zhao, F., Operational Flexibility: A Key Factor in the Development of Biofuel

Technologies, Sustainable Energy Technologies and Assessments, Vol.1, 2013, pp 28-33.

3.Fang, K., Uhan, N., Zhao, F., Sutherland, J.W., Flow Shop Scheduling with Peak Power

Consumption Constraints, Annals of Operations Research, Vol.206, 2013, pp.115-145.

4.Zhao, F., Murray, V.R., Ramani, K., Sutherland, J.W., Toward the Development of Process Plans

with Reduced Environmental Impacts, Frontier of Mechanical Engineering, as feature article, Vol.7 2012, pp 231-246

5.Murray, V.R., Zhao, F., Sutherland, J.W., Life Cycle Analysis of Grinding: A Case Study of Non-

Cylindrical Computer Numerical Control Grinding via Unit-Process Life Cycle Inventory Approach, Proceedings of the IMechE - Part B: Journal of Engineering Manufacture, 2012, Vol. 226, pp.1604-1611.

6.Zhao, F., Ogaldez, J., Sutherland, J.W., Quantifying the Water Inventory of Machining Processes,

CIRP Annals, Vol.61, 2012, pp.67-70.

7.Bernstein, W.Z., Ramanujan, D., Cox, M.F., Zhao, F., Sutherland, J.W., Ramani, K., Teaching

Design for Environment through Critique within a Traditional Product Design Course, International Journal of Engineering Education, Vol.28, 2012, pp.1-12.

8.Hang, Y., Qu, M., Zhao, F., Economic and Environmental Life Cycle Analysis of Solar Hot Water

Systems in the United States, Energy and Buildings, 2012, 45(2), pp.181–188.

9.Agusdinata, D.B., Zhao, F., Delaurentis, D., Sustainability of Bio-jet Fuels: A Multi-Actor Life

Cycle Assessment Approach, IEEE Potentials, 2012, 31(1), pp.27-33.

10.Agusdinata, D.B., Zhao, F., Ileleji, K., Delaurentis, D., Life Cycle Assessment of Potential Bio-jet

Fuel Production in the United States, Environmental Science and Technology, 2011, 45 (21), pp 9133–9143

11.Kou, N, Zhao, F., Techno-Economical Analysis of A Thermo-Chemical Biofuel Plant with

Feedstock and Product Flexibility Under External Disturbances, Energy, 2011, 36(12), pp.6745–6752.

12.Fang, K., Uhan, N., Zhao, F., Sutherland, J.W., A New Approach to Scheduling in Manufacturing

for Power Consumption and Carbon Footprint Reduction, Journal of Manufacturing Systems, 2011,

30 (4):pp. 234-240.

13.Kou, N., Zhao, F., Effect Of Multiple Feedstock Strategy on the Economic and Environmental

Performance of Thermochemical Ethanol Production under Extreme Weather Conditions, Biomass and Bioenergy, Vol.35, Issue 1, 2011, pp. 608-616.

14.Mu, D., Seager, T., Rao, S., Park, J., Zhao, F., A Resilience Perspective of Biofuel Production,

Integrated Environmental Assessment and Management, Volume 7, Issue 3, pp. 348–359, 2011. 15.Hang, Y., Qu, M., Zhao, F., Economical and Environmental Assessment of an Optimized Solar

Cooling System for a Medium-sized Benchmark Office Building in Los Angeles, California,

Renewable Energy, Volume 36, Issue 2, 2011, Pages 648-658.

16.Devanathan, S., Bernstein, W.Z., Ramanujan, D., Zhao, F.,Ramani, K., 2010, Integration of

Sustainability Into Early Design Through the Function Impact Matrix, ASME Journal of Mechanical Design, Volume 132, Issue 8, 081004.

17.Ramani, K., Bernstein, W.Z., Ramanujan, D., Zhao, F., Sutherland, J., Handwerker, C., Choi, J.K.,

Kim, H., and Thurston, D., 2010, Integrated Sustainable Lifecycle Design: A Review, ASME Journal of Mechanical Design, Volume 132, Issue 9, 091004.

18.Zhao, F., Naik, G., Cheng, G., Environmental Assessment of Laser-Assisted Manufacturing: Case

Studies On Laser Shock Peening and Laser Assisted Turning, Journal of Cleaner Production,

Volume 18, Issue 13, 2010, Pages 1311-1319.

19.Mu, D., Seager, T., Rao, P.S.C., Zhao, F, 2010, “Comparative Life Cycle Assessment of

Lignocellulosic Ethanol Production: Bio-chemical vs. Thermo-chemical Conversion”,

Environmental Management, Volume 46, Number 4, 565-578.

Early Publication (Total 16)

20.Skerlos, S.J., Clarens, A.F., Hayes, K.F., Zhao, F., “Current Advances in Sustainable Metalworking

Fluids Research” (Invited paper), International Journal of Sustainable Manufacturing, Vol. 1, No.1-2, pp.180-202, 2008.

21.Zhao, F ., Clarens, A.F., Hayes, K.F. Skerlos, S.J., “Evaluating Activation Conditions for Extreme

Pressure Additives in Metalworking Fluids using the Thread Forming Test", Transactions of

NAMRI/SME , Vol.35, p 351-358, 2007.

22.Zhao, F., Clarens, A.F., Skerlos, S.J., “Optimization of Metalworking Fluid Microemulsion

Surfactant Concentrations f or Microfiltration Recycling”, Environmental Science and Technology, Vol.41, No.3, pp.1016 -1023, 2007.

23.Zhao, F., Clarens, A.F., Skerlos, S.J., Hayes, K., “Structural Aspects of Surfactant Selection for the

Design of Vegetable Oil Semi-Synthetic Metalworking Fluids”, Environmental Science and

Technology, Vol. 40, No. 24, pp.7930-7937, 2006.

24.Zhao, F., Landis, H.R., Skerlos, S.J., “Modeling of Porous Filter Permeability via Image-Based

Stochastic Reconstruction of Spatial Porosity Correlations”, Environmental Science and Technology, Vol.39, No.1, pp.239, 2005.

25.Zhao, F.,Urbance, M., Skerlos, S.J., “Mechanistic Model of Coaxial Microfiltration for Semi-

Synthetic Metalworking Fluid Microemulsions”, Journal of Manufacturing Science and Engineering, Vol. 126, No.3, pp435, 2004.

26.Skerlos, S.J., Zhao, F., “An Optimization Approach to Implementing Microfiltration for Microbial

Control and Recycling in Metalworking Fluids”, Journal of Manufacturing System, Vol. 22, No.3, pp202, 2003.

27.Skerlos, S.J., Skerlos, L.A., Aguilar, C.A., Zhao, F., “Expeditious Identification and Quantification

of Mycobacteria Species in Metalworking Fluids using Peptide Nucleic Acid Probes”, Journal of Manufacturing System, Vol. 22, No. 2, pp136, 2003.

28.Zhao, F., Li, D., Cui, L., “O n Gaseous Pollutant Emission and Sulfur Capture in a Steam Fluidized

Bed. Part I. Experimental Study on Pollutants Formation and Sulphur Capture”, Acta Scientiae

Circumstantiae, Vol.18, No.3, pp225-230, 1998.

29.Zhao, F.,Li, D., Cui, L., “On Gaseous Pollutan t Formation and Sulfur Capture in a Steam Fluidized

Bed. Part II. Comprehensive Model on Pollutants Formation And Sulphur Capture”, Acta Scientiae Circumstantiae, Vol.18, No.3, pp231-236, 1998.

30.Guo, B., Shen, Y., Li, D., Zhao, F., “Modeling Coal Gasification with a Hybrid Neural Network”,

Fuel, Vol. 76, No. 12, pp 1159, 1997.

31.Cui, L., Shen, Y., Li, D., Zhao, F., “Experimental Study on Coal Gasification in Steam Fluidized

Bed”, Engineering Chemistry & Metallurgy, Vol. 18, No. 2, pp 97, 1997.

32.Cui, L. , Shen, Y. , Li, D. , Guo, B. , Zhao, F., “Study on Coal Gasification in Steam Fluidized Bed

Reactor”, Journal of Fuel Chemistry and Technology, Vol 25, No.2, pp.103, 1997.

33.Zhao, F., Li, D., 1996, “Development of Comprehensive Model for Pollutant Emission and

Desulfurization during Coal Gasification in a Steam Fluidized Bed Reactor”, Journal of Combustion Science and Technology, Vol. 2, No. 2, pp 161, 1996.

34.Zhao, F., Wang, A., Analysis of Gaseous Pollutant Components in Syngas from Steam Fluidized

Bed Coal Gasification, Municipal Administration & Technology, Vol.12, no.4, pp.19-22, 1996. 35.Li, D., Zhao, F., Yang, J., Zhang, J., Wang, J., Tian, R., Optimization of Urban Energy Resource

Allocation for Air Pollution Minimization, Energy of China (in Chinese), Vol.18, 1995, pp.29-32. Refereed Conference Proceedings (Total 30, 22 based on work at Purdue)

1.Hang, Y., Qu, M., Zhao, F., Uncertainty Analysis of a Solar Absorption Cooling and Heating System

for a Medium-sized Office Building in Atlanta, the 6th ASME International Conference on Energy Sustainability, July 23-26, 2012, San Diego, USA.

2.Ogaldez, J., Barker, A., Zhao, F., Sutherland, J.W., Water Footprint Quantification of Machining

Processes, 19th CIRP Conference on Life Cycle Engineering, May 23-25, 2012, Berkeley, CA.

3.Bernstein, W.Z., Ramanujan, D., Koho, M., Zhao, F., Ramani, K., Discovering Material Recovery

Scenarios for Industrial Machinery: A Case-Based Approach, Proceedings of the ASME 2012

International Manufacturing Science and Engineering Conference, June 4-8, 2012, Notre Dame, IN.

4.Murray, V.R., Zhao, F., Sutherland, J.W., Integration of Economic and Environmental

Considerations into Process Selection and Planning, accepted, 40th North American Manufacturing Research Conference, June 4-8, 2012, South Bend, IN.

5.Wilson, J.M., Piya C., Murray, V., Shin, Y., Zhao, F., Ramani, K., Laser-Based Remanufacturing of

Engineering Components and Its Environmental Impact Analysis, The International Congress on Applications of Lasers & Electro-Optics, 23 - 27 October , 2011, Disney World Resort, FL.

6.Haapala, K., Zhao, F., Camelio, J., Skerlos, S.J., Sutherland, J.W., Jawair, I.S., Zhang, H.C.,

Dornfeld, D., Clarens, A.F., A Review of Engineering Research in Sustainable Manufacturing,

Proceedings of the ASME 2011 International Manufacturing Science and Engineering Conference, MSEC2011, June 13-17, 2011, Corvallis, Oregon, USA

7.Bernstein, W. Z., Ramanujan, D., Cox, M., Zhao, F., Sutherland, J.W., Ramani, K., Implementing

Design Critique for Teaching Sustainable Concept Generation, International Conference on

Engineering Design ICED ’11, 15-18 August 2011, Technical University of Denmark.

8.Ramanujan, D., Bernstein, W.Z., Zhao, F., Ramani, K., Incorporating Information Gap Decision

Theory Within the Function Impact Method, ASME 2011 International Design Engineering

Technical Conferences, August 28-31, 2011, Washington, DC.

9.Fang, K., Uhan, N., Zhao, F., Sutherland, J.W., A New Approach to Scheduling in Manufacturing

for Power Consumption and Carbon Footprint Reduction, 39th North American Manufacturing

Research Conference, June 13-17, Corvallis, OR.

10.Fang, K., Uhan, N., Zhao, F., Sutherland, J.W., Flow Shop Scheduling for Sustainable

Manufacturing, 10th Workshop on Models and Algorithms for Planning and Scheduling Problems, June 19 - 24, Nymburk, Czech Republic.

11.Zhao, F., Cooper, K., Handwerker, C., GreenTV: A project-based learning module on sustainable

electronics, Proceedings of the 2011 IEEE International Symposium on Sustainable Systems and Technology, Chicago, May 16-18, 2011.

12.Fang, K., Uhan, N., Zhao, F., Sutherland, J.W., A New Shop Scheduling Approach in Support of

Sustainable Manufacturing, 18th CIRP International Conference on Life Cycle Engineering, May 2-4, 2011, Braunschweig, Germany.

13.Bernstein, W.Z., Ramanujan, D., Devanathan, Zhao, F., Ramani, K., Sutherland, J.W., Sustainable

Conceptual Design through Function-Impact Matrix: A designer’s Perspective, ASME IDETC/CIE, August 15-18, 2010, Montreal, Canada.

14.Mu, D., Seager, T., Rao, P.S., Zhao, F., An Examination of Biofuel Production from a Resilience

Perspective, ASME IDETC/CIE, August 15-18, 2010, Montreal, Canada.

15.Bernstein, W.Z., Ramanujan, D., Devanathan, S., Zhao, F., Ramani, K., Sutherland, J.W.,

Development of a Framework for Sustainable Concept Design, 17th CIRP International Conference on Life Cycle Engineering, Hefei, China, May 19-21, 2010.

16.Kou, N., Zhao, F., Feasibility Analysis of Flexible Carbon To Ethanol Process Using Aspen Plus

Process Simulation, Proceedings of the 2009 ASME International Mechanical Engineering

Congress & Exposition, Nov 13-19, 2009, Lake Buena Vista, Florida.

17.Devanathan, S., Zhao, F., Ramani, K., Integration Of Sustainability into Early Design Through

Working Knowledge Model and Visual Tools, 2009 International Manufacturing Science And

Engineering Conference, Oct 4-7, 2009, West Lafayette.

18.Zhao, F., Naik, G., Zhang, L., Environmental Sustainability of Laser-Assisted Manufacturing: Case

Studies On Laser Shock Peening and Laser Assisted Turning, International Manufacturing Science And Engineering Conference, Oct 4-7, 2009, West Lafayette.

19. Iqbal, L.U., Naik, G., Pothala, D., Surapaneni, P.K., Zhao, F., Sullivan, J.P., Environmentally

Conscious Wing Design for the Medium Altitude Long Range UAV, 2009 International

Manufacturing Science And Engineering Conference, Oct 4-7, 2009, West Lafayette.

20.Clarens, A.F., Park, Y.E., Temme, J., Hayes, K., Zhao, F., Skelros, S.J., Evaluation Of Cooling

Potential And Tool Life In Turning Using Metalworking Fluids Delivered In Supercritical Carbon Dioxide, 2009 International Manufacturing Science And Engineering Conference, Oct 4-7, 2009, West Lafayette.

21.Kou, N., Zhao, F., Zhang, L., Aspen Plus Process Simulation of Flexible Feedstock

Thermochemcial Ethanol Production, 2009 International Manufacturing Science And Engineering Conference, Oct 4-7, 2009, West Lafayette.

22.Zhao.F., Mu, D., Rao, P.S., Seager, T., “Technical, Economic, and Environmental Feasibility of

Flexible Feedstock Carbon to Liquid Fuel Process: A Preliminary Analysis”, 6th Global Conference on Sustainable Product Development and Life Cycle Engineering, Sep. 29-Oct.1, 2008, Busan,

Korea.

23.Skerlos, S.J., Hayes, K.F., Clarens, F.C., Zhao, F., “Current Advances in Sustainable Metalworking

Fluids Research”, 6th Global Conference on Sustainable Product Development and Life Cycle

Engineering, Sep. 29-Oct.1, 2008, Busan, Korea.

24.Zhao, F., Clarens, A.F., Hayes, K.F., Skerlos, S.J., “Evaluating Activation Conditions for Extreme

Pressure Additives in Metalworking Fluids Using the Thread Forming Test,”Thirty-five Annual North American Manufacturing Research Conference, May 22-25, 2007, Ann Arbor, Michigan. 25.Skerlos, S.J., Adriaens, P., Hayes, K., Zimmerman, J., Zhao, F.,“Ecological Material and Green

Manufacturing: Design and Technology for Metalworking Fluid Systems” (invited paper),

Proceedings of World Engineering Congress, November 2-6, 2004, Shanghai, China.

26.Zhao, F.,Landis, H., Skerlos, S.J., “Prediction of Microfiltration Flux Decline due to Electroviscous

Retardation and Adsorption using Pore Scale Stochastic Reconstruction Model”, 9th World Filtration Congress, April 18-22, 2004, New Orleans, LA.

27.Skerlos, S.J., Morrow, W.R., Chan, K-Y., Zhao,F.,Seliger, G. et al, “Economic and Environmental

Characteristics of Global Cellular Telephone Remanufacturing”, 2003 IEEE International

Symposium on Electronics and the Environment, May 19-22, 2003, Boston, MA.

28.Skerlos, S.J., Skerlos, L.A., Aguilar, C.A., Zhao, F.,2003, “Expeditious Identification and

Quantification of Mycobacteria Species in Metalworking Fluids using Peptide Nucleic Acid

Probes”, Thirty-first Annual North American Manufacturing Research Conference, May 20-23,

2003, Hamilton, Ontario, Canada.

29.Zhao, F.,Urbance, M., Skerlos, S.J., “Mechanistic Model of Coaxial Microfiltration for Semi-

S ynthetic Metalworking Fluid Microemulsions”, Japan/USA Symposium on Flexible Manufacturing, July 15-18, 2002, Hiroshima, Japan.

30.Skerlos, S.J., Adriaens, P., Hayes, K., Rihana, A., Kurabayashi, K., Takayama, S., Zimmerman, J.,

Zhao, F.,“Challenges to Achieving Sustainable Aqueous Systems: A Case Study in Metalworking

Fluids”, The Second International Symposium on Inverse Manufacturing, December 13-16, 2001,

Tokyo, Japan.

Other Conference Proceedings/Abstracts/Presentations (total 6)

1.Zhao, F., Choi, J.K., Sutherland, J.W., Handwerker, C., Ramani, K., Sustainable Product

Realization For The Life Cycle: Current Drivers And Future Trends, Indo-US Workshop on

Designing Sustainable Products, Services and Manufacturing Systems, Aug. 18-20, 2009, Bangalore, India.

2.Mu, D., Seager, T., Rao, P.S., Zhao, F., An Examination of Biofuel Production from a Resilience

Perspective, 2009 Association of Environmental Engineering and Science Professors Annual

Conference, July 26th-29th, 2009, University of Iowa.

3.Zhao, F., Life Cycle Assessment: Principles and Its Application to Biofuel Technologies,

Proceedings of the 2008 China-US Workshop on Bioenergy Consequences for Global

Environmental Change, October 15-18, 2008, Beijing, China.

4.Zhao, F., Clarens, A.F., Sk erlos, S.J., “Design of Microfiltration Compatible Semi-Synthetic

Metalworking Fluids Using Vegetable Base Oils”, Proceedings of the International Society for

Industrial Ecology Conference 2005, June 12-15, 2005, Stockholm, Sweden.

5.Zhao, F., Clarens, A.F., Skerlos, S.J., 2005. “Design of Sustainable Metalworking Fluid Systems ",

2005 AEESP Research and Education Conference, Clarkson University, July 23 - July 27, 2005.

6.Zhao, F., Clarens, A.F., Skerlos, S.J., 2005. “Optimization of Metalworking Fluid Formulations for

Microfiltration Recycling" 2005 AEESP Research and Education Conference. Clarkson University, July 23 - July 27, 2005.

Book Chapters

1. Zhao, F.,Hayes, K.F., Skerlos, S.J., “Formulation Design of Metalworking Fluid Microemulsions

Using Bio-based Surfactants”, in Bio-Based Surfactants and Detergents, Edited by Douglas G.

Hayes, Daniel Solaiman, Richard Ashby, and Dai Kitamono, to be published by AOCS Press /

Taylor and Francis, Spring 2009.

I NVITED S EMINAR/PRESENTATION

1. “Applying Life Cycle Assessment to Product Design and Development”, Ecological Science and

Engineering Seminar, Purdue University, West Lafayette, April 1st, 2008.

2. “Formulating Vegetable Oil Microemuslions Using Bio-based Surfactants for Metalworking

Applications”, 99th AOCS Annual Meeting, Seattle, WA, May 21, 2008.

3. “Environmental Sustainability: The Role of Engineers”, Purdue Mechanical Engineering graduate

seminar, Oct 22, 2009.

4. “ How Green is Green Energy: A Reflection on Environmental Consequence of Renewable Energy”,

Purdue Energy Club, Nov 5, 2009.

5. “Flexible Carbon to Liquid Process”, 4th Biomass to Liquid Conference, Graz, Austria, Sep. 23-25,

2009.

6.“ Life Cycle Analysis and Sustainability”, Purdue Engineers for a Sustainable World, Jan 21, 2010.

7. “Applying Life Cycle Assessment to Bioenergy Production”, Indiana Biomass Energy Group, West

Lafayette, IN, March 3rd, 2010.

8. “ Integrating Sustainability into Mechanical Engineering Curriculum”, Annual ESW Conference, West

Lafayette, IN, 10/09/2010.

9. “Life Cycle Analysis and its Application for Policy Making Support”, IUPUI Mechanical Engineering

Graduate Seminar, 12/16/2010.

10. “Life Cycle Analysis and Sustainable Product Development”, Southern Indiana Network for the

Advancement of Manufacturing Workshop, Vincennes University-Jasper Campus, Jasper, Indiana, 10/13/2011.

11. “Developing UPLCI model for Gas Metal Arc Welding Process”, as panelist, Building the Industry-

University Network for Unit Process Life Cycle Inventions (UPLCI/CO2PE!) Workshop, 19th CIRP Conference on Life Cycle Engineering, May 23, 2012, Berkeley, CA.

12. “Sustainable Manufacturing: Product, Process, and System”, Midwest Design and Manufacturing

Conference and Expo, Chicago, IL, June 19-21, 2012.

13. “Environmental Sustainability of Buildings”, guest lecture, CE597Sustainable building design

construction and operation, School of Civil Engineering, Purdue University, Nov 1st, 2012.

T EACHING AND C URRICULUM D EVELOPMENT

Courses Taught:

ME 463 Engineering Design Spring 2007, 2008, 2009, 2010, 2012 Project highlights:

Water transportation device for Africa, Spring 2009, 3rd place, ME design innovation competition

Windworks: Kiteboarding for energy, Spring 2009. 4th place, ME design innovation competition

Energy harvesting turnstile, Spring 2010, 3rd place, ME design innovation competition

Anti-theft newspaper dispenser, Spring 2010, 4th place, ME design innovation competition ME 597Z Sustainable Design and Manufacturing Fall 2007, 2008

ME597Z/EEE 555 Life Cycle Assessment: Principles and Applications Fall 2009, 2010, 2011

ME597ZE Environmetnal Analysis of Renewable Energy Systems, Fall 2012

ME200 Thermodynamics I Spring 2011

Curriculum Development

ME 597Z Sustainable Design and Manufacturing (Developed Summer 2007)

EEE 555 Life Cycle Assessment: Principles and Applications (Developed Summer 2008)

U NDERGRADUATE STUDENTS S UPERVISED

Andrew Martinez, Whirlpool Eco-efficiency Projects, Fall 2007.

Vance Pieske, Whirlpool Eco-efficiency Projects, Fall 2007.

John Berlakovic, Summer Undergraduate Research Fellowship student, Summer 2008.

Michael Hountz, LCD TV Recycling, Spring 2009.

Ryan Boris, Sustainable Conceptual Design, Spring 2010.

Suju Huang, Table Top Gasifier, Fall 2010.

Adam Largo, Recycling LCD monitors, Fall 2012.

G RADUATE STUDENTS S UPERVISED

Graduated:

Satija, G., MSME, 2013, Consequential Life Cycle Assessment of Solar PV, as advisor.

Kulkani, M., MSME, 2013, as advisor.

Ogaldez, J., MSME, 2012, Water Footprint Quantification of Manufacturing Processes, as advisor.

Park, J., Ph.D., Civil Engineering, 2012, Quantification of Resilience for Coupled Ecological-Industrial Systems, as co-advisor.

Sapthasayee, R., M.S. in Civil Engineering, May 2012, as co-advisor.

Kou, N, Ph.D., 2011, Biofuel Production System with Operation Flexibility: Evaluation of Economic and Environmental Performance under External Disturbance, as advisor.

Murray, V.R., MSME, 2011, Environmentally Conscious Process Planning, as co-advisor.

Sean Britt, MSME, 2011, as advisor.

Mu, D., Ph.D., 2010, Civil Engineering and Ecological Science and Engineering Interdisciplinary

Graduate Program, An Examination of Biofuel Production Systems from a Resilience Perspective, as co-advisor.

Bomidi, A.R., MSME, 2009, as advisor.

Kou, N., MSME, 2009, as advisor.

In Progress:

Bernstein, W. Z., Direct-Ph.D. student, Mechanical Engineering, Integration of Sustainability into

Conceptual Design, 2009-present, as co-advisor.

Zhang, H., Ph.D. student, Mechanical Engineering, Shop Floor Scheduling for Sustainable

Manufacturing, 2011-present, as advisor.

Abotalib, M., Ph.D. student, Civil Engineering and Ecological Science and Engineering Interdisciplinary Graduate Program, Life Cycle Assessment of Carbon Sequestration Technologies.

C OMMITTEE SERVICES TO P URDUE

Co-director, Purdue Product Lifecycle Management Center, 2011-2013.

Member of Faculty Search Committee, Fall 2012-Spring 2013

Division of Environmental and Ecological Engineering, Purdue University

Member of Faculty Search Committee (Design area), 2008-2009, 2011-2012.

School of Mechanical Engineering, Purdue University

Member of Founding Executive Committee, 2008-2010

Division of Environmental and Ecological Engineering, Purdue University

Member of Curriculum Committee, 2008-present

Division of Environmental and Ecological Engineering, Purdue University

Member of Head Search Committee, 2008-2009

Division of Environmental and Ecological Engineering, Purdue University

Member of Graduate Committee, 2008-present

Ecological Science and Engineering Interdisciplinary Graduate Program, Purdue University Ph.D. Design Area Exam Writer, Spring 2011

School of Mechanical Engineering, Purdue University

P ROFESSIONAL S OCIETY AND A CTIVITIES

Member of

ASME (American Society of Mechanical Engineers)

Chair, 2008-2010/Vice Chair, 2006-2008

Life Cycle Engineering Technical Committee, Division of Manufacturing Engineering

Technical Committee Member, Design for Manufacturing and Life Cycle, Division of Design

Engineering Division

AEESP (Association of Environmental Engineering and Science Professors)

Student Service Committee Member

ACLCA (American Center for Life Cycle Assessment)

Technical Committee Member.

Program Co-chair

17th Design for Manufacturing and the Life Cycle Conference, August 12-15, 2012, Chicago, IL.

Program Chair

18th Design for Manufacturing and the Life Cycle Conference, August 3-6, 2013, Portland, OR.

Session Co-chair

Thirty-five Annual North American Manufacturing Research Conference, May 22-25, 2007, Ann Arbor, Michigan.

Session 3-A: Tool Wear, Tool Life, and Surface Roughness

Session 7-B: Novel Approaches to Machining, Part Positioning and

Manufacturing System Representation

2008 International Manufacturing Science and Engineering Conference

Session 4-A: Material Selection for Sustainable Manufacturing

2009 International Manufacturing Science and Engineering Conference

Session 2-A: Green Manufacturing Processes

2011 International Manufacturing Science and Engineering Conference

Session 7-B: Sustainable Nanomanufacturing

Session 5-A: Manufacturing Systems

Symposium/panel co-organizer:

Panel Discussion: New Criteria for Engineering Optimization, 2009 International Manufacturing Science and Engineering Conference, Oct 4-7, 2009, West Lafayette, IN.

Sustainable Manufacturing Process and Systems, 2009 International Manufacturing Science and Engineering Conference, Oct 4-7, 2009, West Lafayette, IN.

Material Selection, Processing, Reuse and Recycle for Sustainable Manufacturing, The 2008

International Manufacturing Science and Engineering Conference, Oct 7-10, 2008, Chicago, IL.

Sustainable Design and Manufacturing, 2012 Japan-USA Symposium on Flexible Automation, June 10-12, St. Louis, MS.

Member of Technical/Scientific Committee

The 2009 International Manufacturing Science and Engineering Conference, Oct 4-7, 2009, West Lafayette, IN.

6th Global Conference on Sustainable Product Development and Life Cycle Engineering, Sep. 29-Oct.1, 2008, Busan, Korea.

2012 IEEE International Symposium on Sustainable Systems and Technology.

Reviewer of:

For government agencies:

Leaders Opportunity Fund, Canada Foundation for Innovation

Qatar National Priorities Research Program

Executive Agency for Higher Education, Research, Development and Innovation Funding, Romania.

EPA P3: People, Prosperity and the Planet Student Design Competition for Sustainability.

USDA Sun Grant Western Center

National Science Foundation, OISE, the International Research Experience for Students Program.

National Science Foundation, CMMI, Advanced Manufacturing Program, Manufacturing and Construction Machines and Equipment Panel.

DOE ARPA-E, Concept Paper Review.

National Science Foundation Small Business Innovation Research/ Small Business Technology Transfer (SBIR/STTR) Phase I panel.

For journals:

Advances in Engineering Education

Advances in Mechanical Engineering

Applied Energy

BioEnergy Research

Biomass and Bioenergy

BioResources

Catalysis Letters

Energy

Energy Efficiency

Environmental Management

Environmental Science and Technology

Industrial & Engineering Chemistry Research

International Journal of Computer Integrated Manufacturing

International Journal of Modelling, Identification and Control

International Journal of Precision Engineering and Manufacturing.

International Journal of Production Economics

International Journal of Sustainable Transportation

Journal of Cleaner Production

Journal of Environmental Engineering

Journal of Intelligent Manufacturing

Journal of Manufacturing Processes

Journal of Mechanical Design

Journal of Renewable and Sustainable Energy

Journal of Surfactants and Detergents

Proceedings of Combustion Institute

Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture Proceedings of the Institution of Mechanical Engineers, Part N, Journal of Nanoengineering and Nanosystems

SV-Journal of Mechanical Engineering

Water Environment Research

For conferences:

2006 Japan-USA Symposium on Flexible Automation

2007 International Manufacturing Science and Engineering Conference

2008 International Manufacturing Science and Engineering Conference

2009 International Manufacturing Science and Engineering Conference

2010 International Design Engineering Technical Conference

2011 IEEE International Symposium on Sustainable Systems and Technology 2011 North American Manufacturing Research Conference

2011 International Manufacturing Science and Engineering Conference 2011 International Design Engineering Technical Conference

2012 IEEE International Symposium on Sustainable Systems and Technology 2012 International Manufacturing Science and Engineering Conference 2012 International Design Engineering Technical Conference

2013 North American Manufacturing Research Conference

2013 International Manufacturing Science and Engineering Conference

美国签证提交简历中英文样板---Sample-Resume-(使馆提供)

姓名(拼音和汉字): 性别: 出生日期: 出生地: 家庭住址: 单位地址: 家庭电话: 工作电话: 手机号码: 电子邮箱: 教育背景–请分别列出您取得的所有学位，从最高学位写起。 月，年—月，年大学名称 学位和专业 论文标题/研究焦点（只对硕士和博士学位）工作经历–请列举您的所有工作经历。 月，年—月，年单位名称 地址 职位或职称 工作职责 所获奖项及加入哪些团体组织（如果适用） 出版物—请列出您发表的所有出版物标题、合作者和年份（如果适用）

出国经历—请列举您到访过的所有国家及到访时间 国家（年） 例如：美国（2002，2003）；加拿大（2008，2009） 同行人–请写出和您一起赴美的所有同行人姓名及与您的关系

Name (in pinyin and Chinese): Gender: Date of Birth: Place of Birth: Home Address: Business Address: Home Phone: Work Phone: Mobile Phone: E-mail: Education – please list all degrees attained, beginning with the most recent Month, Year – Month, Year University Name Degree and Major Thesis Topic/Research Focus (for masters and phd degrees) Work Experience – please list all work experience Month, Year – Month, Year Employer Location Position or Title Duties Awards and Group Memberships – if any

2016年博士后英文简历范文

2016年博士后英文简历范文 Job objectives Search for colleges and universities or research institutes and the work of enterprises and institutions engaged in teaching or research activities. Personal Information Name Date of Birth Sex Male XXX *** Graduated from Zhejiang University, academic institutions, professional Dr animal nutrition and feed science 2007-07 English proficiency graduation time CET6 Origin, marital status *** *** *** political landscape Personal evaluation I am honest sincere, character, cheerful, mature self-confidence, positive; good com#munication, a strong team spirit and sense of responsibility, strong organizational skills; thinking active, good at innovation, a strong practical ability, suitable for scientific research and development,

英文简历必备-个人资料中英翻译

个人资料 name 姓名 alias 别名 pen name 笔名 date of birth 出生日期 birth date 出生日期 born 出生于 birth place 出生地点 age 年龄 native place 籍贯 province 省 city 市 autonomous region 自治区prefecture 专区 county 县 nationality 民族，国籍citizenship 国籍 duel citizenship 双重国籍address 地址 current address 目前地址present address 目前地址permanent address 永久地址postal code 邮政编码 home phone 住宅电话 office phone 办公电话business phone 办公电话Tel.电话 sex 性别 male 男

female 女 height 身高 weight 体重 marital status 婚姻状况family status 家庭状况married 已婚 single/unmarried 未婚divorced 离异 separated 分居 number of children 子女人数none 无 street 街 lane 胡同，巷 road 路 district 区 house number 门牌 health 健康状况 health condition 健康状况blood type 血型 short-sighted 近视 far-sighted 远视 color-blind 色盲 ID card No.身份证号码 date of availability 可到职时间available 可到职membership 会员，资格president 会长 vice-president 副会长director 理事 standing director 常务理事

申请国外博士 个人简历(CV) 模板

XXX Gender: Male Date of Birth: 10/20/1987 Add: Nanjing University of Information Science & Technology School of Environmental Science and Engineering School Office No. 219, Ningliu Road, Pukou District, Nanjing, Jiangsu Province, 210044, P. R. China E-mail: mr.xxx@https://www.wendangku.net/doc/ee7293961.html, Tel: 86-137******** Education Nanjing University of Information Science & Technology September 2008- Present ●Bachelor of Science in Applied Chemistry Nanjing, China ●Anticipated Graduation : June 2012 ●Cumulative Grade Point Average: 3.56/4.0 (89/100);Integrated Ranking: 1/53 Research Experience ●Professor W’s Group February 2011-Present Research Projects: The modification of the antifungal Fluconazole; Synthesis of carbohydrate compounds containing β-amino alcohol via Henry Reaction; The synthesis and applications of oxazolidinone compounds. Main Responsibility: Search literature, optimize experimental methods under the guidance; Carry out reactions and purify the products. ●Associate Professor M’s Group March-December 2010 1.Research Projects: Design and Applications of Functional Macrocyclic Compounds( College Students' Science and Technology Innovation Training Projects of Jiangsu Province (No.xxx and No.xxxx) ) 2.Chinese Patent: The Synthesis and Applications of Macrocyclic Compounds Containing The Structure of Arylamine (Application No. xxxxxxxxx.x). 3.Publication Synthesis and characterization of the novel shape-persistent nanosized cavity macrocycle, synthetic metals 2011, XXX, XXXX-XXXX. Research Interests

博士英文简历范文【最新版】

博士英文简历范文 Resume Personal Information Name: Wang Jiang Gender: male Date of Birth: 1986/02/22 Residency: HuangShi Zip Code: 435002 Career Objective:English Teacher Home Tel: 086-0714-******* Mobile: 0714- Email: Wang Jiang https://www.wendangku.net/doc/ee7293961.html, Political Background:probationary party member Leadership Position:the chair of league member Address: HuBei province HuangShi City Ma Fang village Work Experience

20xx/07-20xx/9:commended by dean to be an English private tutor in BeiJing 20xx/03--20xx/05:QiHui private tutor Center as an English Tutor in XianNing 20xx/06-20xx/12:as an English Tutor teaching High School student in HuangShi 20xx/10-20xx/05:as a student secretary of the college of foreign studies 20xx/08-20xx/12:an English training teacher of Info Tech Essentials, Inc. Huang Shi Branch Education 20xx/09--20xx/06 XianNing University English Education Associate 20xx/09--20xx/06 HuBei Normal Univercity English

(完整版)博士英文自我介绍范文

博士英文自我介绍范文一： Good morning, Dear Professors: It’s my honor to introduce myself. My name is chenchen, I am from qingyang County anhui Province, April 6 I was born in a common family, and my parents are workers, I love and respect them very much. We were delight with my becoming a fresh man in September 1994. Luckily, I was permitted to be a graduate student after 5 years colorful life on campus. I received my Bachelor degree 2005 in anhui agriculture university Institute of (College of )Resources and Environmental Science, then a Master degree 2009 in anhui agriclture University of Science and Technology. For those 7 years my major was Die Design. Before I received my Master degree, I had done the subject of meteorology. For the past 3 years, I have been in anhui agriculture College, where I have been and still am a teacher. I teach students Machine Design etc. I have published more than 10 first-author papers. That’s all, thanks! 博士英文自我介绍范文二： Good afternoon, my dear teachers. I am great honored to be here for this interview. Now allow me to give a brief self-introduction. My name is XX, XX years old, born in XX province. I spent my college life in XX. During my campus life, I was getting to know my major—XX and loving it gradually. Thanks to my passion for this profession, I had an idea to get further studies. Then I chose the XX to continue my study because I think our school can give me the higher platform to increase my knowledge. Now I am proud to be a master graduate student in our school. I have had nearly XX years’ graduate experience in our school. In the period of this time, I learned a variety of expertise and was inspired by a lot of teachers in their classes. At the same time, I worked involved in a number of practical projects under my tutor’s guidance. Those experiences have given me a wonderful opportunity to put the theoretic knowledge into real practice. Only in this way can we master the knowledge we’ve lea rned firmly. As the saying goes:”genuine knowledge comes from practice.” I think that

博士毕业英文简历模板

博士毕业英文简历 Job objectives Search for colleges and universities or research institutes and the work of enterprises and institutions engaged in teaching or research activities. Personal Information Name Date of Birth Sex Male XXX *** Graduated from Zhejiang University, academic institutions, professional Dr animal nutrition and feed science 2007-07 English proficiency graduation time CET6 Origin, marital status *** *** *** political landscape Personal evaluation I am honest sincere, character, cheerful, mature self-confidence, positive; good communication, a strong team spirit and sense of responsibility, strong organizational skills; thinking active, good at innovation, a strong practical ability, suitable for scientific research and development, teaching and business management aspects of the work of Education Duration Learning experiences Zhejiang University 2004.9-2007.7 animal nutrition and feed science PhD 2001.9-2004.7 ****** 1997.9-2001.7 ***** Foreign language

博士面试英文自我介绍3分钟范文

博士面试英文自我介绍3分钟范文 无论在面试过程中还是在简历上，英文自我介绍都发挥着越来越重要的作用，一份优秀的3分钟自我介绍可也成为博士求职的敲门砖，下面是我整理的博士面试英文自我介绍3分钟范文，欢迎大家阅读。 博士面试英文自我介绍3分钟范文篇1 Good afternoon! Professors ： I am honored to introduce myself. My name is ** 30 years old, born in ** city, ** province. In year 20xx and 20xx, I received my Bachelor degree and Master degree in **i University. I major in **. After my graduation, I got a job in **. In the past three years, I was involved in several research projects, such as **。Owning to my hard work, I was rewarded the Excellent Prize in the successive three years. However, with time going on, the more I experienced, the clearer I realized that I am really interested in the exchange process of **. I find that the similar and complicated problems rise in my study subject, so I’m eager to cognize more about this field and I hope I can study further in this University . So I am standing here now. I am really excited. I believe what I am doing is a right thing. Thank you! 为什么考 I am interested in **. I find that the similar and complicated problems rise in my study subject, so I’m eager to cognize more about this field and I hope I can study further in this University . 介绍你的学习计划 Firstly, I hope I can form systematic view of **. Secondly, I wish to find a way to solve the complicated problem in my study subject. 如何毕业并发表论文

考研复试英文简历常用词汇中英文对照

考研复试英文简历常用词汇中英文对照 有的学校考研复试需要提供相关的英文个人简历，在写简历时常用到的词语比如：个人资料、个人品质、教育程度、工作经历等等常用词汇都可以在下面的中英文对照中查到。 个人资料常用语 name 姓名in. 英寸pen name 笔名ft. 英尺 alias 别名street 街road 路 district 区 house number 门牌 lane 胡同，巷 address 地址 permanent address 永久住址 Mr. 先生Miss 小姐Ms （小姐或太太） Mrs. 太太 age 年龄height 身高 blood type 血型weight 体重 born 生于 birthday 生日 birthdate/date of birth 出生日期 province 省 city 市birthplace 出生地点 county 县home phone 住宅电话 prefecture 专区office/business phone 办公电话 autonomous region 自治区 nationality 民族；国籍current address 目前住址 citizenship 国籍 native place 籍贯 postal code 邮政编码 dual citizenship 双重国籍 marital status 婚姻状况 family status 家庭状况married 已婚 single 未婚divorced 离异 separated 分居number of children 子女人数 health condition 健康状况health 健康状况 excellent （身体）极佳short-sighted 近视 far-sighted 远视ID card 身份证 membership 会员、资格 president 会长vice-president 副会长 director 理事standing director 常务理事 society 学会association 协会 secretary-general 秘书长research society 研究会 个人品质常用词汇 able 有才干的，能干的adaptable 适应性强的 active 主动的，活跃的aggressive 有进取心的ambitious 有雄心壮志的amiable 和蔼可亲的 amicable 友好的analytical 善于分析的

博士生英文自我介绍范文

博士生英文自我介绍范文Introduction of doctoral students in English

博士生英文自我介绍范文 前言：个人简历是求职者给招聘单位发的一份简要介绍，包括个人的 基本信息、过往实习工作经验以及求职目标对应聘工作的简要理解， 在编写简历时，要强调工作目标和重点，语言精简，避免可能会使你 被淘汰的不相关信息。写出一份出色的个人简历不光是对找工作很有 用处，更是让陌生人对本人第一步了解和拉进关系的线。本文档根据 个人简历内容要求和特点展开说明，具有实践指导意义，便于学习和 使用，本文下载后内容可随意调整修改及打印。 good morning, dear professors: it’s my honor to introduce myself. my name is xxx, i am fromxxcountyxxprovince, december xxxx i was born in a poor family, and my parents are farmers, i love and respect them very much. we were delight with my becoming a fresh man in september 1997.luckily, i was permitted to be a graduate student after 4 years colorful life on campus. i received my bachelor degreeXX inxx institute of science and technology, then a master degreeXX inxx university of science and technology. for those 7 years my major was die design. before i received my master degree, i had done the

博士英文简历范文

博士英文简历范文 本文是关于博士英文简历范文，仅供参考，希望对您有所帮助，感谢阅读。 博士英文简历范文(一) Resume personal Information Name: Wang Jiang Gender: male Date of Birth: 1986/02/22 Residency: HuangShi Zip Code: 435002 Career Objective：English Teacher Home Tel: 086-0714-******* Mobile: 0714- Email: Wang Jiang political Background：probationary party member Leadership position：the chair of league member Address: HuBei province HuangShi City Ma Fang village Work Experience 20xx/07-20xx/9：commended by dean to be an English private tutor in BeiJing 20xx/03--20xx/05：QiHui private tutor Center as an English Tutor in XianNing 20xx/06-20xx/12：as an English Tutor teaching High School student in HuangShi 20xx/10-20xx/05：as a student secretary of the college of foreign studies 20xx/08-20xx/12：an English training teacher of Info Tech Essentials, Inc. Huang Shi Branch Education 20xx/09--20xx/06 XianNing University English Education Associate 20xx/09--20xx/06 HuBei Normal Univercity English Bachelor Training 20xx/10--20xx/12 No 14 Middle School in HuangShi city English cadet

英文简历模板普林斯顿博士生简历

XXXXXXXX Email: XXXXXXXXXX Address: 88 College Road West, Princeton, NJ 08544 Princeton, New Jersey (United States) 2015 Master of Finance (expected) Expected courses: Asset pricing, Macroeconomics: domestic policy (by Alan Blinder), Fixed income models, Econometrics: nonlinear models, International monetary policy. Ecole Polytechnique, Paris (France) 2011 - 2014 Undergraduate student at France’s leading institute of technology Majoring in Economics, Applied Mathematics, Computer programming, with a minor in Physics and Mathematics Lycée Condorcet, Paris (France) 2009 – 2011 Selective undergraduate course in sciences preparing for the competitive entrance exam to French ‘Grandes Ecoles’ (elite science academic institutions) with majors in Mathematics and Physics Lycée Louis-le-Grand, Paris (France) 2005 – 2008 High School Diploma equivalent to A-levels Fortress Investment Group April 2014 – July 2014 Analyst intern in Liquid Markets Group ?W orked as an analyst at Fortress Global Macro Fund. Analyzed many companies in sectors ranging from Industrials to Luxury by combining a bottom-up approach with macroeconomic considerations ?P articipated in the inception of a Global Equity hedge fund, leveraged the experience of several portfolio managers and acquired knowledge about several developed and emerging markets MMA Pan Asia Fund Summer 2013 Research intern in a hedge fund ?Worked as an analyst in a hedge fund in New York. Developed set of skills and models to understand and evaluate a company and its prospects ?Gained an insight of the psychology of financial markets while communicating with many analysts working at several prestigious institutions Lycée Marcel Rudloff Winter 2011 – Spring 2012 Teacher Assistant and Students’ Tutor ?Worked with a team of teachers to help underprivileged students. Taught science classes and learned to work under scrutiny and pressure, while assessing my authority ?Discovered a different side of the French education system and its potential failures Represented Ecole Polytechnique during the 2013 Spring Session - Music: Played the piano for 12 years, and enjoys classical music concerts Languages French : native ; English : fluent ; Spanish : basic Computer skills - Maple, Bloomberg, VBA, Microsoft Office - Basics knowledge about Java programming language

中英文对照简历模板+英文简历词汇大全 (备考BEC的童鞋们看过来~)

新东方洪薇薇老师的心血~~ PART ONE 简历模板 Personal Data个人信息 Name 姓名 Age 年龄 Job objective 应聘职位 Date of birth 出生日期 Height 身高 Health status 健康状况 Registered Residence 户口所在地 Contact 联系方式 Education Qualifications教育程度 Degree 学历学位 Major 专业 Specialized courses 专业课程 Compulsory courses 必修课程 Optional courses 选修课程 GPA (grade point average) 平均绩点Certificates 证书(Capability of English/Computer Honor 荣誉( scholarship, rewards, etc.)

Working Experiences工作经历 （以下为格式举例，供参考） (Time Period) (Name of Enterprise/department) (Position) (Contents) Jul. ~Aug., 2008 08年7~8月Microsoft Customer Services 微软客服 IT support Intern 技术支持实习生 Computer-related problem-shooting 排除计算机相关故障 Strengths特长 eg. 良好的沟通能力(Good Communication skill) 敏锐的商业头脑(Sharp Business Mind) 决策及信息高度透明(Transparency) 能当机立断(I’m willing to make decisions.) 我和他人容易共事。(I work well with others.) 我能有效进行时间管理。(I can organize my time efficiently.) PART TWO 简历英文词汇 个人资料 name 姓名 alias 别名 pen name 笔名 date of birth 出生日期 birth date 出生日期 born 出生于 birth place 出生地点 age 年龄

博士英文简历范文

博士英文简历范文 导读：本文是关于博士英文简历范文，希望能帮助到您！ 博士英文简历范文(一) Resume personal Information Name: Wang Jiang Gender: male Date of Birth: 1986/02/22 Residency: HuangShi Zip Code: 435002 Career Objective：English Teacher Home Tel: 086-0714-******* Mobile: 0714- Email: Wang Jiang political Background：probationary party member Leadership position：the chair of league member Address: HuBei province HuangShi City Ma Fang village Work Experience 20xx/07-20xx/9：commended by dean to be an English private tutor in BeiJing 20xx/03--20xx/05：QiHui private tutor Center as an English Tutor in XianNing 20xx/06-20xx/12：as an English Tutor teaching High School student in HuangShi 20xx/10-20xx/05：as a student secretary of the college of foreign studies

博士面试英文自我介绍_模板

博士面试英文自我介绍_模板 博士面试英文自我介绍（一） good morning, dear professors: it’s my honor to introduce myself. my name is xxx, i am from xx county xx province, december xxxx i was born in a poor family, and my parents are farmers, i love and respect them very much. we were delight with my becoming a fresh man in september 1997. luckily, i was permitted to be a graduate student after 4 years colorful life on campus. i received my bachelor degree 2001 in xx institute of science and technology, then a master degree 2004 in xx university of science and technology. for those 7 years my major was die design. before i received my master degree, i had done the subject of xxxxxxxxxxx. for the past 3 years, i have been in xxxxxx college, where i have been and still am a teacher. i teach students machine design etc. i have published more than 10 first-author papers. that’s all, thanks! 博士面试英文自我介绍（二） Hello, my professors.It’s a fine day today,and i’m very pleased to meet you here.First of all,i’d like to introduce mysel f to you.My name is ***,my hometown is ***,which is a really beautiful city.Even when i was a young boy,i was very interested in biology science.Every one may have a dream,and i still remember that my dream is to be a biology scientist (just like ZHU KE ZHEN).I liked to make wonders just like,where are we from?Where are we going in the universe?And then i would find the answers in book by myself.Still today i think that interest is the best teacher in one’s whole life (and knowledge comes from practice). Second, i will introduce my major in the university.My major is Biological Engineering in *** University.It has a great relationship with biology scince.Their relationship can be shown with an example: Just like a river,biology science,which often finds new discoveries and theories, is at the head of the river.And my major,which lays more stress on practical use, seems to be at the end of it.When both of them interact well enough,the discovries and theories in biology science can be soon turned into products in all of the modern industry. Four years’ university education gives me a lot of things to learn,a lot of chances to try,and a lot of practices to improve myself.It teaches me not only what to study and how to think,but also to see the importance of practical ability (such as doing expriment as much as possible). In the university life,i have made many good friends.They help me improve my study and research ability, do ererything just like a man,and often give me good example to follow. Besides what i have introduced myself above,i also have many interests in my spare time.I like playing football,which is an effective way i think to improve my body health,and it can teach me how to join in a group and deal with other people.Drawing and writing is another favor to me. Above all,i choose the major in order to broad my view in biology scince,and enhance my research ability.I will do my best to join the new group and be good at postgraduate study. 篇一：简单的自我介绍 本人性格活泼开朗、工作认真仔细、具有很好的亲和力，善于与人沟通、而且爱好广泛，爱好唱歌、写作、喜欢不断创新、追求新事物。毕业于20**年*月份。步入社会以后，做过兼职和两年的全职工作，有一定的工作能力和语言的沟通能力。做事也比较认真付责任。收