物性表,物性表大全

UBE Nylon 1013NW8

Polyamide 6

UBE Engineering Plastics,S.A.

1of 1

.

Product Description

UBE NYLON 1013NW8is a standard viscosity Polyamide 6for general injection moulding application.It offers an excellent balance between toughness and rigidity.General

Material Status ?Commercial:Active Availability ?

Europe Features

?Good Flow ?Good Toughness ?Medium Rigidity

RoHS Compliance ?RoHS Compliant Appearance ?Natural Color Forms

?Pellets

Processing Method

?

Injection Molding

Physical

Nominal Value Unit

Test Method Specific Gravity 1.14g/cm3ASTM D792Molding Shrinkage ASTM D955Flow

1.2% Across Flow 1.3%

Mechanical

Nominal Value Unit Test Method Tensile Strength ASTM D638Yield 80.0MPa Break

65.0MPa

Tensile Elongation (Break)100%ASTM D638Flexural Modulus 2850MPa ASTM D790Flexural Strength 110MPa

ASTM D790Impact

Nominal Value Unit

Test Method Notched Izod Impact 65J/m

ASTM D256Hardness

Nominal Value Unit

Test Method Rockwell Hardness (R-Scale)120

ASTM D785Thermal

Nominal Value Unit Test Method Deflection Temperature Under Load ASTM D6480.45MPa,Unannealed 195°C 1.8MPa,Unannealed 75.0°C Melting Temperature 220°C

DSC

Electrical

Nominal Value Unit

Test Method Surface Resistivity 1.0E+15ohm ASTM D257Flammability

Nominal Value Unit

Test Method Flame Rating -UL V-2

UL 94

Additional Information

Relative Viscosity,JIS K6920,96%H2SO4,conc.1.0%:2.49

Notes

1 Typical

properties:these are not to be construed as specifications.