https://www.wendangku.net/doc/eb12377841.html, 1.3 Watt – Unregulated Wall Plug
PLA01A Linear Replacement
Features
? EISA Level IV Compliant ? Lower Cost than Regulated ? 90 – 264 VAC Input Range ? Zero Minimum Load ? High Efficiency ? Light Weight
? Double Insulated
Applications
? Wireless Communications ? Blue Tooth Device Charger ? Cordless Head Set
? Cell Phone
Safety Approvals
? UL / cUL 60950-1
Mechanical Characteristics
? Length: 50.5 mm (2.0 in) ? Height: 35 mm (1.38 in) ? Width: 25 mm (0.98 in) ?
Weight: 58 g ( 2.05 oz)
Dimension Diagram Unit: mm (inch)
Output Voltage / Current Characteristics Curve
Model Nameplate
Voltage PLA01A-050-R 5.0 V PLA01A-090-R 9.0
V
PLA01A-120-R 12.0
V
PLA01A-050-R
PLA01A-090-R
PLA01A-120-R
PLA01A Characteristics INPUT:
AC Input Voltage Range Immunity
90 to 264VAC
EN61000-4-2, Level 3 AC Inrush Current
EN61000-4-5, Level 3 40A max @ 240VAC, 25°C
Input Power Saving
General
Leakage Current <0.3W max @ 120/240VAC, no load
≤ 10 uA max
California Energy Commission Compliant, Level IV Dielectric Withstand (Hi-pot) Efficiency 3KVAC, Primary to Secondary MTBF (Full Load, 25°C)
≥ 52.4 %
100K Hrs. min. at max load, 25°C ambient and 120VAC
OUTPUT: Ripple (1) DC Output Connector
150 mVp-p
2.1 mm x 5.5 mm Center Positive AC Input Clip Over Voltage Protection
5VDC: OVP shall not exceed 15V Max Fixed US blade 9VDC: OVP shall not exceed 18V Max 12VDC: OVP shall not exceed 24V Max Short Circuit Protection Auto Recovery
ENVIRONMENTAL:
Operation Temperature (Convection) 0°C ~ 40°C
Storage Temperature -40°C ~ 85°C Humidity 90% RH Max Emissions FCC Class B EN55022 class B
Note: (1) Measured after 10 minutes with by-pass
capacitors 0.1uf / 10uf at output connector terminal and oscilloscope set at 20 MHz.
Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit https://www.wendangku.net/doc/eb12377841.html, for the most up-to-date specifications.
11-11-08