Fiber Inspection and Cleaning Kits
Key Features
?Complete solution for inspecting and cleaning fiber connectors in a single kit
?Easily inspect and clean both sides of fiber connections ?Crisp,clear fiber end face images for detailed visual inspection of contamination ?Portable,handheld probe and display ?Highly effective cleaning tools
?Precision inspection tips for different connectors and applications
?Compact carrying case for portability and organization
Dirt,dust,and other particles on fiber end faces are the primary causes of troubleshooting in optical networks.In addition,most field test failures can be attributed to dirty connectors.JDSU Fiber Inspection and Cleaning Kits enable quick and easy visual inspection to determine whether fiber connectors are truly clean before they are mated.Proactively inspecting and cleaning fiber connectors,enables technicians to reduce network troubleshooting and downtime,optimizes signal performance,and prevents network damage.
JDSU provides the industry’s most complete solution for inspecting and cleaning fiber connectors with a combination of all the necessary equipment that technicians need to ensure the integrity of optical connections.These convenient kits address the vast array of inspection and cleaning needs in today’s field applications.
For inspection,
each kit comes equipped with a probe microscope,a portable handheld HD3 video display,and eight precision inspection tips for various bulkhead and patch cord configurations.For cleaning,each kit includes two bulkhead/patch cord cleaning tools,connector cleaning solvent,and lint-free wipes.All contents are provided in a compact and secure carrying case,providing a safe,portable,and convenient solution for fiber technicians.
Applications
?
Easily inspects both sides
(bulkhead and patch cord) of a fiber connection
COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS
?Provides a quick and easy cleaning solution for end face contaminants
?Effectively remove stubborn
contaminants with cleaning solvent
Fiber Inspection
The JDSU video fiber inspection probe and handheld display system is used to inspect both “male”(patch cord) and “female”(bulkhead) sides of a fiber interconnect.Both the probe and display fit comfortably in a users’hand for portability and easy operation.Various interchangeable tips enable optimized inspection for different connector types and applications.
The FBP series probe provides dual (200x and 400x) magnification and a selection of over 350 different inspection tips.FBE series probes provide a more economical option with single magnification (200x or 400x) and a selection of common tip configurations.Both configurations are hardwired with a compact HD3 series display,which includes a 1.8-inch TFT LCD to provide a portable inspection
solution for fiber technicians.
Kit Components
Focus Control
Recirculating focus wheel adjusts
focus on the display screen
FBET Inspection Tip
FBET-SC
Magnification Control
Switch between low & high
magnification
FBPT Inspection tip
and Barrel Assembly
Focus Control
Adjust focus on the
display screen
Accessory Connection
Power Mode Selector
·ON mode for continuous ON
·GripSwitch Mode designed to
save battery life
·Off/Charge Mode to turn
power OFF or to CHARGE
battery
Hex Screw
Remove to access battery
compartment
AC Power/Charger Input
Alternative AC power and battery charger input
Probe Input
4-pin FBP Probe Input for stand-alone display
Low Battery Indicator
When lit,remaining battery life = 30 minutes
1.8”TFT LCD Screen
Press both sides to turn power ON and release
to turn power OFF
FBE-SM1-C/FBE-SM2-C FBP-SM03-C Microscope FBE FBP
Display HD3HD3
Compatability FBET Series (~30)FBPT Series (350+)
Patchcord Inspection Tips Universal 1.25 mm Universal 1.25 mm
Universal 2.5 mm Universal 2.5 mm
Universal 2.5 mm APC Universal 2.5 mm APC Bulkhead Inspection Tips SC,LC,FC,ST,SC/APC SC,LC,FC,ST,SC/APC
Portable Cleaning Tool:Bulkhead/Patch Cord - 2.5 mm Yes Yes
Portable Cleaning Tool:Bulkhead/Patch Cord - 1.25 mm Yes Yes
Cleaning Solvent Yes Yes
Cleaning Wipes Yes Yes
Carrying Case Yes Yes
FBP Probe
FBE Probe
HD3 Display
Fiber Cleaning Tools
IBC? brand cleaners are dry cloth cleaners specifically designed to clean either side of a fiber connection.For cleaning connectors behind a bulkhead,simply insert the device into the bulkhead until a click sound is heard.For cleaning patch cords,the dust cap acts as an adapter to receive the connector ferrule.These tools are simple to use and highly effective at removing oil and dust contaminants.
FCC2? optical-grade solvent is designed specifically for cleaning optical
connectors.Electrically conductive,this solvent is ideal and effective at removing stubborn forms of debris by dissipating static charges that bind particulate to connector end faces.Ideal for wet-to-dry cleaning procedures,this fast-drying solvent is nonflammable,nontoxic,noncorrosive,
and safe to use.
IBC Cleaner (1.25 mm)
IBC Connector cleaner (Universal 2.5 mm)
Optical-grade cleaning solvent and lint-free wipes remove stubborn contaminants
Specifications
FBE Probe Inspection Tip Compatibility FBET Series tips Dimensions
12.5 x 3.3 x 3.2 cm (5 x 1.32 x 1.28 in)
Detection w/ HD3 display <1 μm Low Mag (HFOV)550 μm High Mag (HFOV)350 μm Weight 180 g (6.35 oz)Cord Length 240 cm (7.87 ft) coil Camera Type 1/3”CMOS Sensor
Light Source
Blue LED,100,000+ hour life
Lighting Technique Coaxial
Power Source
From HD3 display
FBP Probe Inspection Tip Compatibility FBPT Series tips Dimensions
14.0 x 4.6 x 4.4 cm (5.5 x 1.8 x 1.7 in)
Detection w/ HD3 display <1 μm Low Mag (HFOV)550 μm High Mag (HFOV)350 μm Weight 180 g (6.35 oz)Cord Length 240 cm (7.87 ft) coil Camera Type 1/3”CMOS Sensor
Light Source
Blue LED,100,000+ hour life
Lighting Technique Coaxial
Power Source
From HD3 display
HD3 Display Dimensions
10 x 7 x 4.3 cm (3.9 x 2.8 x 1.7 in)
Weight 150 g (5 oz) w/ Hanging accy Screen Size 4.6 cm (1.8 in)Power Source Built-in rechargeable NiMH
(nickel metal hydride),800 mAH battery of AC adapter
(100-200 VAC/12 VDC)
Power Mode ON (continuous on)
ON/GRIP (GripSwitch power save mode)
OFF/CHARGE (power off or charge)
Portable Cleaning Tools Compatibility
1.25 mm Version (LC,MU)
2.5 mm Version (SC,FC,ST)
Cleanings per unit 525+Impact resistance:Up to 6 feet Operating Temperature Range -10 to +60°C
(14 to 140°F)
Crush resistance up to 20.4 kg (45 lbs)Effective at removing:Debris,dust,skin oil,70% IPA residue,hand lotion,distilled water residue,salt residue
Lint-Free Cleaning Wipes Material
Soft,hydroentangled polyester fabric
Dimensions (in tub) 5 x 10.80 cm (2 x 4.25 in)
Quantity (per tub)
90
Cleaning Solvent
Technical Details Chemical Family HFC solvent Appearance Clear,colorless liquid Odor Slight,ethereal Boiling Point 45°C / 113°F Solvency & Cleaning Data Vapor Pressure (mmHg @ 20°C)310Percent Volatile 100%Specific Gravity 1.34pH Neutral Health,Safety & Environmental Data Toxicity ppm,8-Hr TWA,PEL See MSDS Flashpoint (TCC)None Flammability Nonflammable NFPA Health:1;Fire 0;Reactivity:1Ozone Impact Zero RoHS and WEEE Compliant Yes SNAP Approved Yes Safe for Travel Yes
Ordering Information
Inspection and Cleaning Kits
FBE-SM1-C Fiber Inspection and Cleaning Kit,200X FBE probe,hardwired to HD3 display.Includes SC,LC,FC,ST,SC-APC,U25M,
U25MA,and U12M tips,bulkhead/patch cord cleaning tools (2.5 mm and 1.25 mm),soft case,and
power supply/charger
FBE-SM2-C Fiber Inspection and Cleaning Kit,400X FBE probe,hardwired to HD3 display.Includes SC,LC,FC,ST,SC-APC,U25M,
U25MA,and U12M tips,bulkhead/patch cord cleaning tools (2.5 mm and 1.25 mm),soft case,and
power supply/charger
FBP-SM03-C Fiber Inspection and Cleaning Kit,200X/400X FBP probe,hardwired to HD3 display.Includes SC,LC,FC,ST,SC-APC,
U25M,U25MA,and U12M tips,bulkhead/patch cord cleaning tools (2.5 mm and 1.25 mm),carrying case,and power
supply/charger
Accessories
Supplemental Cleaning Tools and Consumables
FCB-IBC12-10Fiber cleaning tool,IBC,bulkhead and patch cord,1.25 mm ferrules,10-Pack
FCB-IBC25-10Fiber cleaning tool,IBC,bulkhead and patch cord,2.5 mm ferrules,10-Pack
FCR-001Fiber cleaning tool,CleanCheck,patch cord
FCR-CLN-01Fiber Field Cleaning Consumables Kit
FCR-FCC-01Fiber Cleaning Consumables (Solvent & Wipes) Bulk Refill Pack
Supplemental Inspection Tips and Adapters
FBPT-E2000Tip,E2000 bulkhead,for FBP video fiber microscope
FBPT-FC Tip,FC bulkhead,for FBP video fiber microscope
FBPT-LC Tip,LC bulkhead,for FBP video fiber microscope
FBPT-LC-L Tip,LC long reach for FBP video fiber microscope
FBPT-MTP Tip,MTP/MPO multimode bulkhead,for FBP video fiber microscope
FBPT-MTPA Tip,MTP/MPO single-mode bulkhead,for FBP video fiber microscope
FBPT-SC Tip,SC bulkhead,for FBP video fiber microscope
FBPT-SC-APC Tip,SC-APC bulkhead,for FBP video fiber microscope
FBPT-SC-A6Tip,SC bulkhead,for FBP video fiber microscope,angled 60°
FBPT-ST Tip,ST bulkhead,for FBP video fiber microscope
FBPT-ST-A6Tip,ST bulkhead,for FBP video fiber microscope,angled 60°
FBPT-U12M Tip,universal 1.25 mm patch cord for FBP video fiber microscope
FBPT-U25M Tip,universal 2.5 mm patch cord for FBP video fiber microscope
FBPT-U25MA Tip,universal 2.5 mm APC patch cord for FBP video fiber microscope
FBPT-UFMA Universal flare adapter,connects FMA adapters to FBP probe
* For additional information on tips and accessories not listed above,please contact a JDSU sales representative.
Test & Measurement Regional Sales
Product specifications and descriptions in this document subject to change without notice.? 2008 JDS Uniphase Corporation July 200830149492 000 0708 CLEANKIT.DS.FOP.TM.AE