HPUX 11.31系统镜像
【HPUX 11.31专题】HPUX 11.31系统镜像
HPUX 11.23及以后版本与11.22版本配置根盘镜像的最大的不同:
1. 新增加了HPSP分区
11.22系统根盘只划分了两个分区EFI / HP-UX，在11.23系统中，划分了3个分区，分别为EFI / HP-UX / HPSP相应在使用idisk命令划分硬盘分区时使的/tmp/partitionfile 文件中的内容也做了相应调整。
2. EFI分区大小从原先的100M，增加到500M。
镜像步骤
1、查看基本信息
#ioscan -m dsf
Persistent DSF Legacy DSF(s)
========================================
/dev/pt/pt2 /dev/rscsi/c5t7d0
/dev/rtape/tape1_BEST /dev/rmt/c7t3d0BEST
/dev/rtape/tape1_BESTn /dev/rmt/c7t3d0BESTn
/dev/rtape/tape1_BESTb /dev/rmt/c7t3d0BESTb
/dev/rtape/tape1_BESTnb /dev/rmt/c7t3d0BESTnb
/dev/pt/pt3 /dev/rscsi/c6t15d0
/dev/rdisk/disk11 /dev/rdsk/c0t6d0
/dev/rdisk/disk11_p1 /dev/rdsk/c0t6d0s1
/dev/rdisk/disk11_p2 /dev/rdsk/c0t6d0s2
/dev/rdisk/disk11_p3 /dev/rdsk/c0t6d0s3
/dev/rdisk/disk12 /dev/rdsk/c1t2d0
/dev/rdisk/disk13 /dev/rdsk/c2t6d0
/dev/rdisk/disk14 /dev/rdsk/c5t1d0
/dev/rdisk/disk15 /dev/rdsk/c5t0d0
/dev/rdisk/disk16 /dev/rdsk/c5t3d0
/dev/rdisk/disk17 /dev/rdsk/c5t2d0
/dev/rdisk/disk18 /dev/rdsk/c6t1d0
/dev/rdisk/disk19 /dev/rdsk/c6t0d0
/dev/rdisk/disk20 /dev/rdsk/c6t2d0
/dev/rdisk/disk21 /dev/rdsk/c6t3d0
这个命令是11.31操作系统里面所独有的，普通操作的时候看不出有什么好处，在有多路径的时候优势就显示出来了，比如说添加了EMC的存储，设备名/dev/rdsk/c5t0d0跟/dev/rdsk/c8t0d0对应的是同一块磁盘，在11.23下面如果要加入到vg里面必须把两个设备名都加进去，而在11.31下面因为有了多路径映射，会显示为/dev/rdisk/diskxx的形式，对应这两个设备，这样就比较一目了然了。比如说：
#ioscan -m dsf /dev/rdisk/disk15
/dev/rdisk/disk15 /dev/rdsk/c5t0d0
/dev/rdsk/c8t0d0
#ioscan -kfnC disk
Class I H/W Path Driver S/W State H/W Type Description
======================================================== ===============
disk 0 3/0/0/2/0.6.0 sdisk CLAIMED DEVICE HP 146 GHUS153014VL3800 /dev/dsk/c0t6d0 /dev/dsk/c0t6d0s2 /dev/rdsk/c0t6d0 /dev/rdsk /c0t6d0s2
/dev/dsk/c0t6d0s1 /dev/dsk/c0t6d0s3 /dev/rdsk/c0t6d0s1 /dev/rd sk/c0t6d0s3
disk 10 3/0/0/2/1.2.0 sdisk CLAIMED DEVICE HL-DT-STDVD-RAM GH40L /dev/dsk/c1t2d0 /dev/rdsk/c1t2d0
disk 1 3/0/0/3/0.6.0 sdisk CLAIMED DEVICE HP 146 GHUS153014VL3800 /dev/dsk/c2t6d0 /dev/rdsk/c2t6d0
disk 3 3/0/8/1/0/4/1.0.0 sdisk CLAIMED DEVICE COMPAQ BF1468AFEB /dev/dsk/c5t0d0 /dev/rdsk/c5t0d0
disk 2 3/0/8/1/0/4/1.1.0 sdisk CLAIMED DEVICE COMPAQ BF1468AFEB /dev/dsk/c5t1d0 /dev/rdsk/c5t1d0
disk 5 3/0/8/1/0/4/1.2.0 sdisk CLAIMED DEVICE COMPAQ BF1468AFEB /dev/dsk/c5t2d0 /dev/rdsk/c5t2d0
disk 4 3/0/8/1/0/4/1.3.0 sdisk CLAIMED DEVICE COMPAQ BF1468AFEB /dev/dsk/c5t3d0 /dev/rdsk/c5t3d0
disk 7 3/0/10/1/0/4/0.0.0 sdisk CLAIMED DEVICE COMPAQ BF1468AFEB /dev/dsk/c6t0d0 /dev/rdsk/c6t0d0
disk 6 3/0/10/1/0/4/0.1.0 sdisk CLAIMED DEVICE COMPAQ BF1468AFEB /dev/dsk/c6t1d0 /dev/rdsk/c6t1d0
disk 8 3/0/10/1/0/4/0.2.0 sdisk CLAIMED DEVICE COMPAQ BF1468AFEB /dev/dsk/c6t2d0 /dev/rdsk/c6t2d0
disk 9 3/0/10/1/0/4/0.3.0 sdisk CLAIMED DEVICE COMPAQ BF1468AFEB /dev/dsk/c6t3d0 /dev/rdsk/c6t3d0
2. Create the system, OS, and service partitions.
#vi /tmp/partitionfile
3
EFI 500MB
HPUX 100%
HPSP 400MB
#idisk -wf /tmp/partitionfile /dev/rdisk/disk13
idisk version: 1.44
********************** WARNING ***********************
If you continue you may destroy all data on this disk.
Do you wish to continue(yes/no)? yes
EFI Primary Header:
Signature = EFI PART
Revision = 0x10000
HeaderCRC32 = 0x60f87d52
MyLbaLo = 0x1
MyLbaHi = 0x0
AlternateLbaLo = 0x1117732f
AlternateLbaHi = 0x0
FirstUsableLbaLo = 0x40
FirstUsableLbaHi = 0x0
LastUsableLbaLo = 0x111772ff
LastUsableLbaHi = 0x0
Disk GUID = 5a0c2376-ec7e-11de-8000-d6217b60e588
PartitionEntryLbaLo = 0x2
PartitionEntryLbaHi = 0x0
NumberOfPartitionEntries = 0xc
SizeOfPartitionEntry = 0x80
PartitionEntryArrayCRC32 = 0xc3dc096
Primary Partition Table (in 512 byte blocks):
Partition 1 (EFI):
Partition Type GUID = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
Unique Partition GUID = 5a0c25b0-ec7e-11de-8000-d6217b60e588 Starting Lba Lo = 0x40
Starting Lba Hi = 0x0
Ending Lba Lo = 0xf9fff
Ending Lba Hi = 0x0
Partition 2 (HP-UX):
Partition Type GUID = 75894c1e-3aeb-11d3-b7c1-7b03a0000000 Unique Partition GUID = 5a0c25c4-ec7e-11de-8000-d6217b60e588 Starting Lba Lo = 0xfa000
Starting Lba Hi = 0x0
Ending Lba Lo = 0x110af7ff
Ending Lba Hi = 0x0
Partition 3 (HPSP):
Partition Type GUID = e2a1e728-32e3-11d6-a682-7b03a0000000 Unique Partition GUID = 5a0c25d8-ec7e-11de-8000-d6217b60e588 Starting Lba Lo = 0x110af800
Starting Lba Hi = 0x0
Ending Lba Lo = 0x111772ff
Ending Lba Hi = 0x0
EFI Alternate Header:
Signature = EFI PART
Revision = 0x10000
HeaderSize = 0x5c
HeaderCRC32 = 0x4c050c26
MyLbaLo = 0x1117732f
AlternateLbaLo = 0x1
AlternateLbaHi = 0x0
FirstUsableLbaLo = 0x40
FirstUsableLbaHi = 0x0
LastUsableLbaLo = 0x111772ff
LastUsableLbaHi = 0x0
Disk GUID = 5a0c2376-ec7e-11de-8000-d6217b60e588
PartitionEntryLbaLo = 0x1117730f
PartitionEntryLbaHi = 0x0
NumberOfPartitionEntries = 0xc
SizeOfPartitionEntry = 0x80
PartitionEntryArrayCRC32 = 0xc3dc096
Alternate Partition Table (in 512 byte blocks):
Partition 1 (EFI):
Partition Type GUID = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
Unique Partition GUID = 5a0c25b0-ec7e-11de-8000-d6217b60e588 Starting Lba Lo = 0x40
Starting Lba Hi = 0x0
Ending Lba Lo = 0xf9fff
Ending Lba Hi = 0x0
Partition 2 (HP-UX):
Partition Type GUID = 75894c1e-3aeb-11d3-b7c1-7b03a0000000 Unique Partition GUID = 5a0c25c4-ec7e-11de-8000-d6217b60e588 Starting Lba Lo = 0xfa000
Starting Lba Hi = 0x0
Ending Lba Lo = 0x110af7ff
Ending Lba Hi = 0x0
Partition 3 (HPSP):
Partition Type GUID = e2a1e728-32e3-11d6-a682-7b03a0000000 Unique Partition GUID = 5a0c25d8-ec7e-11de-8000-d6217b60e588 Starting Lba Lo = 0x110af800
Starting Lba Hi = 0x0
Ending Lba Lo = 0x111772ff
Ending Lba Hi = 0x0
Legacy MBR (MBR Signatures in little endian):
MBR Signature = 0x12230c5a
Protective MBR
3. Create device files needed for the new partitions. #insf -eCdisk
insf: Installing special files for sdisk instance 0 address 3/0/0/2/0.6.0
insf: Installing special files for sdisk instance 10 address 3/0/0/2/1.2.0
insf: Installing special files for sdisk instance 1 address 3/0/0/3/0.6.0
insf: Installing special files for sdisk instance 3 address 3/0/8/1/0/4/1.0.0
insf: Installing special files for sdisk instance 2 address 3/0/8/1/0/4/1.1.0
insf: Installing special files for sdisk instance 5 address 3/0/8/1/0/4/1.2.0
insf: Installing special files for sdisk instance 4 address 3/0/8/1/0/4/1.3.0
insf: Installing special files for sdisk instance 7 address 3/0/10/1/0/4/0.0.0
insf: Installing special files for sdisk instance 6 address 3/0/10/1/0/4/0.1.0
insf: Installing special files for sdisk instance 8 address 3/0/10/1/0/4/0.2.0
insf: Installing special files for sdisk instance 9 address 3/0/10/1/0/4/0.3.0
insf: Installing special files for esdisk instance 11 address 64000/0xfa00/0x0
insf: Installing special files for esdisk instance 12 address 64000/0xfa00/0x1
insf: Installing special files for esdisk instance 13 address 64000/0xfa00/0x2
insf: Installing special files for esdisk instance 14 address 64000/0xfa00/0x4
insf: Installing special files for esdisk instance 15 address 64000/0xfa00/0x5
insf: Installing special files for esdisk instance 16 address 64000/0xfa00/0x6
insf: Installing special files for esdisk instance 17 address 64000/0xfa00/0x7
insf: Installing special files for esdisk instance 18 address 64000/0xfa00/0x9
insf: Installing special files for esdisk instance 19 address 64000/0xfa00/0xa
insf: Installing special files for esdisk instance 20 address 64000/0xfa00/0xb
insf: Installing special files for esdisk instance 21 address 64000/0xfa00/0xc
4. Verify the partition table.
# idisk /dev/rdsk/c3t2d0
5. Verify that the device files were created properly.
#ioscan -kfnC disk
Class I H/W Path Driver S/W State H/W Type Description
======================================================== ===============
disk 0 3/0/0/2/0.6.0 sdisk CLAIMED DEVICE HP 146 GHUS153014VL3800 /dev/dsk/c0t6d0 /dev/dsk/c0t6d0s2 /dev/rdsk/c0t6d0 /dev/rdsk /c0t6d0s2
/dev/dsk/c0t6d0s1 /dev/dsk/c0t6d0s3 /dev/rdsk/c0t6d0s1 /dev/rd sk/c0t6d0s3
disk 10 3/0/0/2/1.2.0 sdisk CLAIMED DEVICE HL-DT-STDVD-RAM GH40L /dev/dsk/c1t2d0 /dev/rdsk/c1t2d0
disk 1 3/0/0/3/0.6.0 sdisk CLAIMED DEVICE HP 146 GHUS153014VL3800 /dev/dsk/c2t6d0 /dev/dsk/c2t6d0s2 /dev/rdsk/c2t6d0 /dev/rdsk /c2t6d0s2
/dev/dsk/c2t6d0s1 /dev/dsk/c2t6d0s3 /dev/rdsk/c2t6d0s1 /dev/rd sk/c2t6d0s3
6. Populate the /efi/hpux/ directory in the new EFI system partition.
#mkboot -e -l /dev/rdisk/disk13
7. Change the auto file for the mirror to boot without quorum. #mkboot -a "boot vmunix -lq" /dev/rdisk/disk11
#mkboot -a "boot vmunix -lq" /dev/rdisk/disk13
8. Verify the contents of the auto file on the primary and the
mirror.
#efi_cp -d /dev/rdisk/disk11_p1 -u /efi/hpux/auto /dev/tty
boot vmunix -lq
#efi_cp -d /dev/rdisk/disk13_p1 -u /efi/hpux/auto /dev/tty
boot vmunix -lq
#ioscan -m dsf
Persistent DSF Legacy DSF(s)
========================================
/dev/pt/pt2 /dev/rscsi/c5t7d0
/dev/rtape/tape1_BEST /dev/rmt/c7t3d0BEST
/dev/rtape/tape1_BESTn /dev/rmt/c7t3d0BESTn
/dev/rtape/tape1_BESTb /dev/rmt/c7t3d0BESTb
/dev/rtape/tape1_BESTnb /dev/rmt/c7t3d0BESTnb
/dev/pt/pt3 /dev/rscsi/c6t15d0
/dev/rdisk/disk11 /dev/rdsk/c0t6d0
/dev/rdisk/disk11_p1 /dev/rdsk/c0t6d0s1
/dev/rdisk/disk11_p2 /dev/rdsk/c0t6d0s2
/dev/rdisk/disk11_p3 /dev/rdsk/c0t6d0s3
/dev/rdisk/disk12 /dev/rdsk/c1t2d0
/dev/rdisk/disk13 /dev/rdsk/c2t6d0
/dev/rdisk/disk13_p1 /dev/rdsk/c2t6d0s1
/dev/rdisk/disk13_p3 /dev/rdsk/c2t6d0s3
/dev/rdisk/disk13_p2 /dev/rdsk/c2t6d0s2
/dev/rdisk/disk14 /dev/rdsk/c5t1d0
/dev/rdisk/disk15 /dev/rdsk/c5t0d0
/dev/rdisk/disk16 /dev/rdsk/c5t3d0
/dev/rdisk/disk17 /dev/rdsk/c5t2d0
/dev/rdisk/disk18 /dev/rdsk/c6t1d0
/dev/rdisk/disk19 /dev/rdsk/c6t0d0
/dev/rdisk/disk20 /dev/rdsk/c6t2d0
/dev/rdisk/disk21 /dev/rdsk/c6t3d0
9. Add the new partition to vg00.
#pvcreate -fB /dev/rdisk/disk13_p2
Physical volume "/dev/rdisk/disk13_p2" has been successfully created.
#vgextend vg00 /dev/disk/disk13_p2
Volume group "vg00" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf 10. Mirror all logical volumes in vg00
#for lv in /dev/vg00/lvol*
> do
> lvextend -m 1 $lv /dev/disk/disk13_p2;
> done
The newly allocated mirrors are now being synchronized. This operation will
take some time. Please wait ....
Logical volume "/dev/vg00/lvol1" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf The newly allocated mirrors are now being synchronized. This operation will
take some time. Please wait ....
Logical volume "/dev/vg00/lvol2" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf The newly allocated mirrors are now being synchronized. This operation will
take some time. Please wait ....
Logical volume "/dev/vg00/lvol3" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf The newly allocated mirrors are now being synchronized. This operation will
take some time. Please wait ....
Logical volume "/dev/vg00/lvol4" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf The newly allocated mirrors are now being synchronized. This operation will
take some time. Please wait ....
Logical volume "/dev/vg00/lvol5" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf The newly allocated mirrors are now being synchronized. This operation will
take some time. Please wait ....
Logical volume "/dev/vg00/lvol6" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf The newly allocated mirrors are now being synchronized. This operation will
take some time. Please wait ....
Logical volume "/dev/vg00/lvol7" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf The newly allocated mirrors are now being synchronized. This operation will
take some time. Please wait ....
Logical volume "/dev/vg00/lvol8" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf 11. Add the new disk to /stand/bootconf
#cat /stand/bootconf
l /dev/disk/disk11_p2
#vi /stand/bootconf
l /dev/disk/disk11_p2
l /dev/disk/disk13_p2
12. Verify that the new disk was added to vg00, and the lv's are in sync.
# vgdisplay -v vg00
13. Verify that the BDRA was updated properly
#lvlnboot -R
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf
#lvlnboot -v
Boot Definitions for Volume Group /dev/vg00:
Physical Volumes belonging in Root Volume Group:
/dev/disk/disk11_p2 -- Boot Disk
/dev/disk/disk13_p2 -- Boot Disk
Boot: lvol1 on: /dev/disk/disk11_p2
/dev/disk/disk13_p2
Root: lvol3 on: /dev/disk/disk11_p2
/dev/disk/disk13_p2
Swap: lvol2 on: /dev/disk/disk11_p2
/dev/disk/disk13_p2
Dump: lvol2 on: /dev/disk/disk11_p2, 0
14. Add EFI primary and high availability boot path menu entries.
#setboot -p 3/0/0/2/0.6.0
#setboot -h 3/0/0/3/0.6.0
#setboot–b on
15. Verify that the primary and mirror boot paths are configured properly.
#setboot
Primary bootpath : 3/0/0/2/0.0x6.0x0 (/dev/rdisk/disk11)
HA Alternate bootpath : 3/0/0/3/0.0x6.0x0 (/dev/rdisk/disk13)
Alternate bootpath :
Autoboot is ON (enabled)
Hyperthreading : OFF
: OFF (next boot)
16. Test the new mirror by booting off of it.
# shutdown -r -y 0
17. Select "HP-UX HA Alternate Boot" to test the mirror.
EFI Boot Manager ver 1.10 [14.61] Firmware ver 2.21 [4334]
Please select a boot option
HP-UX Primary Boot: 3/0/0/2/0.6.0
HP-UX HA Alternate Boot: 3/0/0/3/0.6.0
EFI Shell [Built-in]
18.Verify which disk/kernel you booted from.
# grep "Boot device" /var/adm/syslog/syslog.log
vmunix: Boot device's HP-UX HW path is: 3/0/0/3/0.6.0
19. Remove temporary files.
# rm /tmp/partitionfile
附：HP-UX 11.31下完全清除硬盘残留的分区信息
如下所示，HP-UX 11.31操作系统中，一次镜像分拆后，/dev/dsk/c5t0d0磁盘上(原系统镜像盘)仍旧留有和系统盘/dev/dsk/c0t6d0相同的分区信息:
# ioscan -fnC disk
Class I H/W Path Driver S/W State H/W Type Description
====================================================================== =====
disk 1 2/0/0/2/0.6.0 sdisk CLAIMED DEVICE HP 146 GST3146855LC
/dev/dsk/c0t6d0 /dev/dsk/c0t6d0s2 /dev/rdsk/c0t6d0 /dev/rdsk/c0t 6d0s2
/dev/dsk/c0t6d0s1 /dev/dsk/c0t6d0s3 /dev/rdsk/c0t6d0s1 /dev/rdsk/c0t 6d0s3
disk 3 2/0/12/1/0/4/1.0.0 sdisk CLAIMED DEVICE COMPAQ BF1468B26B
/dev/dsk/c5t0d0 /dev/dsk/c5t0d0s2 /dev/rdsk/c5t0d0 /dev/rdsk/c5t 0d0s2
/dev/dsk/c5t0d0s1 /dev/dsk/c5t0d0s3 /dev/rdsk/c5t0d0s1 /dev/rdsk/c5t 0d0s3
仅仅通过“pvcreate -f /dev/rdsk/c5t0d0”来对磁盘进行格式化也只能对磁盘中数据进行清空，但分区信息依然存在:
# pvcreate -f /dev/rdsk/c5t0d0
Physical volume "/dev/rdsk/c5t0d0" has been successfully created.
# ioscan -fnC disk
disk 3 2/0/12/1/0/4/1.0.0 sdisk CLAIMED DEVICE COMPAQ BF1468B26B
/dev/dsk/c5t0d0 /dev/dsk/c5t0d0s2 /dev/rdsk/c5t0d0 /dev/rdsk/c5t 0d0s2
/dev/dsk/c5t0d0s1 /dev/dsk/c5t0d0s3 /dev/rdsk/c5t0d0s1 /dev/rdsk/c5t 0d0s3
下面介绍清空分区信息的具体方法：
1，# idisk -R /dev/rdsk/c5t0d0 或者# idisk –w –R /dev/rdsk/c5t0d0
idisk version: 1.44
********************** WARNING ***********************
If you continue you will destroy all partition data on this disk.
Do you wish to continue(yes/no)? yes
2，# rmsf -H 2/0/12/1/0/4/1.0.0
3，ioscan -fnC disk
Class I H/W Path Driver S/W State H/W Type Description
====================================================================== =====
disk 1 2/0/0/2/0.6.0 sdisk CLAIMED DEVICE HP 146 GST3146855LC
/dev/dsk/c0t6d0 /dev/dsk/c0t6d0s2 /dev/rdsk/c0t6d0 /dev/rdsk/c0t 6d0s2
/dev/dsk/c0t6d0s1 /dev/dsk/c0t6d0s3 /dev/rdsk/c0t6d0s1 /dev/rdsk/c0t 6d0s3
disk 0 2/0/0/2/1.2.0 sdisk CLAIMED DEVICE Optiarc DVD RW AD-5170A
/dev/dsk/c1t2d0 /dev/rdsk/c1t2d0
disk 2 2/0/0/3/0.6.0 sdisk CLAIMED DEVICE HP 146 GST3146855LC
/dev/dsk/c2t6d0 /dev/rdsk/c2t6d0
disk 3 2/0/12/1/0/4/1.0.0 sdisk CLAIMED DEVICE COMPAQ BF1468B26B disk 4 2/0/12/1/0/4/1.1.0 sdisk CLAIMED DEVICE COMPAQ BF1468B26B
/dev/dsk/c5t1d0 /dev/rdsk/c5t1d0
通过以上信息可见磁盘/dev/dsk/c5t0d0上分区信息已经丢失，磁盘路径没有显示是与"rmsf -H 2/0/12/1/0/4.1.0.0"有关；
4，通过"insf"命令为磁盘加载驱动程序：
# insf -e
insf: Installing special files for sdisk instance 1 address 2/0/0/2/0.6.0
insf: Installing special files for sctl instance 0 address 2/0/0/2/0.7.0
insf: Installing special files for sdisk instance 0 address 2/0/0/2/1.2.0
insf: Installing special files for sctl instance 1 address 2/0/0/2/1.7.0
insf: Installing special files for sdisk instance 2 address 2/0/0/3/0.6.0
insf: Installing special files for sctl instance 2 address 2/0/0/3/0.7.0
insf: Installing special files for stape instance 0 address 2/0/0/3/1.3.0
insf: Installing special files for sctl instance 3 address 2/0/0/3/1.7.0
insf: Installing special files for sctl instance 5 address 2/0/12/1/0/4/0.7.0
insf: Installing special files for sdisk instance 3 address 2/0/12/1/0/4/1.0.0
insf: Installing special files for sdisk instance 4 address 2/0/12/1/0/4/1.1.0
insf: Installing special files for sdisk instance 5 address 2/0/12/1/0/4/1.2.0
insf: Installing special files for sdisk instance 6 address 2/0/12/1/0/4/1.3.0
insf: Installing special files for sctl instance 4 address 2/0/12/1/0/4/1.7.0
insf: Installing special files for sctl instance 7 address 2/0/12/1/0/4/1.15.0
insf: Installing special files for sctl instance 8 address 2/0/14/1/0/4/0.7.0
insf: Installing special files for sdisk instance 7 address 2/0/14/1/0/4/1.0.0
insf: Installing special files for sdisk instance 8 address 2/0/14/1/0/4/1.1.0
insf: Installing special files for sdisk instance 9 address 2/0/14/1/0/4/1.2.0
insf: Installing special files for sdisk instance 10 address 2/0/14/1/0/4/1.3.0
insf: Installing special files for sctl instance 6 address 2/0/14/1/0/4/1.7.0
insf: Installing special files for ipmi instance 0 address 2/250/1
insf: Installing special files for asio0 instance 0 address 2/250/2
insf: Installing special files for pseudo driver cn
insf: Installing special files for pseudo driver mm
insf: Installing special files for pseudo driver ptym
insf: Installing special files for pseudo driver ptys
insf: Installing special files for pseudo driver udp
insf: Installing special files for pseudo driver tcp
insf: Installing special files for pseudo driver rawip
insf: Installing special files for pseudo driver nuls
insf: Installing special files for pseudo driver dmem
insf: Installing special files for pseudo driver ip
insf: Installing special files for pseudo driver arp
insf: Installing special files for pseudo driver tlcotsod
insf: Installing special files for pseudo driver tlcots
insf: Installing special files for pseudo driver tlclts
insf: Installing special files for pseudo driver devkrs
insf: Installing special files for pseudo driver dmp
insf: Installing special files for pseudo driver dev_config
insf: Installing special files for pseudo driver strlog
insf: Installing special files for pseudo driver sad
insf: Installing special files for pseudo driver stcpmap
insf: Installing special files for pseudo driver tels
insf: Installing special files for pseudo driver telm
insf: Installing special files for pseudo driver asyncdsk
insf: Installing special files for pseudo driver vols
insf: Installing special files for pseudo driver echo
insf: Installing special files for pseudo driver dlpi
insf: Installing special files for pseudo driver ptm
insf: Installing special files for pseudo driver pts
insf: Installing special files for pseudo driver klog
insf: Installing special files for pseudo driver sy
insf: Installing special files for pseudo driver kepd
insf: Installing special files for pseudo driver diag2
insf: Installing special files for pseudo driver root
5，通过"ioscan"命令进行确认：
# ioscan -fnC disk
Class I H/W Path Driver S/W State H/W Type Description
====================================================================== =====
disk 1 2/0/0/2/0.6.0 sdisk CLAIMED DEVICE HP 146 GST3146855LC
/dev/dsk/c0t6d0 /dev/dsk/c0t6d0s2 /dev/rdsk/c0t6d0 /dev/rdsk/c0t 6d0s2
/dev/dsk/c0t6d0s1 /dev/dsk/c0t6d0s3 /dev/rdsk/c0t6d0s1 /dev/rdsk/c0t 6d0s3
disk 0 2/0/0/2/1.2.0 sdisk CLAIMED DEVICE Optiarc DVD RW AD-5170A
/dev/dsk/c1t2d0 /dev/rdsk/c1t2d0
disk 2 2/0/0/3/0.6.0 sdisk CLAIMED DEVICE HP 146 GST3146855LC
/dev/dsk/c2t6d0 /dev/rdsk/c2t6d0
disk 3 2/0/12/1/0/4/1.0.0 sdisk CLAIMED DEVICE COMPAQ BF1468B26B
/dev/dsk/c5t0d0 /dev/rdsk/c5t0d0
disk 4 2/0/12/1/0/4/1.1.0 sdisk CLAIMED DEVICE COMPAQ BF1468B26B
/dev/dsk/c5t1d0 /dev/rdsk/c5t1d0
disk 5 2/0/12/1/0/4/1.2.0 sdisk CLAIMED DEVICE COMPAQ BF1468B26B
/dev/dsk/c5t2d0 /dev/rdsk/c5t2d0
disk 6 2/0/12/1/0/4/1.3.0 sdisk CLAIMED DEVICE COMPAQ BF1468B26B
/dev/dsk/c5t3d0 /dev/rdsk/c5t3d0
disk 7 2/0/14/1/0/4/1.0.0 sdisk CLAIMED DEVICE COMPAQ BF1468B26B
/dev/dsk/c7t0d0 /dev/rdsk/c7t0d0
disk 8 2/0/14/1/0/4/1.1.0 sdisk CLAIMED DEVICE COMPAQ BF1468B26B /dev/dsk/c7t1d0 /dev/rdsk/c7t1d0
disk 9 2/0/14/1/0/4/1.2.0 sdisk CLAIMED DEVICE COMPAQ BF1468B26B /dev/dsk/c7t2d0 /dev/rdsk/c7t2d0
disk 10 2/0/14/1/0/4/1.3.0 sdisk CLAIMED DEVICE COMPAQ BF1468B26B /dev/dsk/c7t3d0 /dev/rdsk/c7t3d0