T h u m b w h e e l & P u s h w h e e l
Features/Benefits
?Most complete product offering in the industry ?Spacers available to fit most panel cutouts ?Front or rear mounting options
Typical Applications
?Test & measurement equipment ?Industrial equipment ?Computer devices
Specifications
CONTACT RATING:
CARRY: 1 AMP continuous.SWITCH: 100 mA max.
OPERATING VOLTAGE: 50 mV to 28 V DC or 120 V AC.ELECTRICAL LIFE: 100,000 actuations.
CONTACT RESISTANCE: Below 100 m ?typ. initial @
2-4 V DC, 100 mA.
INSULATION RESISTANCE: 109?min.
DIELECTRIC STRENGTH: 500 Vrms min. @ sea level
between common terminal and any output.OPERATING TEMPERATURE: -10oC to 65oC.
Materials
HOUSING: ABS plastic.
THUMBWHEEL: ABS plastic.
ROTOR CONTACTS: Precious metal on copper alloy.STATOR CONTACTS: Hard gold over nickel over copper
on epoxy fiberglass.
NOTE:Specifications and materials listed above are for switches with standard options For information on specific and custom switches, consult Customer Service Center.
* Note: All models listed are RoHS compliant. See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
Build-A-Switch
T o order , simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages N–9 thru N–12. For additional options not shown in catalog, consult Customer Service Center.Consult factory for illumination availability.
Series
3
Thumbwheel switch Number of Sections 0Switch section 1 1 Switch section 2 2 Switch sections 3 3 Switch sections 4 4 Switch sections 5 5 Switch sections 6
6 Switch sections 7
7 Switch sections 8
8 Switch sections 9More than 8switch sections
Seal
0No seal
1Sealed contacts 2Dust lens
3Sealed contacts & dust lens
Function Code
11Decimal,SP ,10 position 14Resistor decade 21BCD,10 position
23Complement of BCD,10 position 27BCD,10 position 31BCD,10 position 71BCH,16 position
Terminations
0Type 0
1Type 1,extended type 0
N Solder pins with .100”spacing**P Solder pins with .156”spacing**9Any combination
Color/Marking/Stops 0Matte black body,gloss black wheel,white marking
Mounting Style
00Snap-in,front mount 09Snap-in,front mount*10Rear mount
19Rear mount*
20Rear mount
29Rear mount*
*X9 mounting styles must be ordered with ‘0’ number of sections.
** Note: Termination option N (RoHS compliant) replaced termination option 3 (Non-RoHS compliant).
Termination option P (RoHS compliant) replaced termination option B (Non-RoHS compliant).
Thumbwheel & Pushwheel
Available Terminations: 0, 1, N See fig. 1, page N-12.
Available Terminations: 1See fig. 1, page N-12.
See fig. 1, page N-12.
Available Terminations: 0, 1, N 21
BCD 1-2-4-8; 10 POSITION
14
RESISTOR DECADE; 1-2-2-2-2 CODE (RESISTORS NOT SUPPLIED)
11
DECIMAL–1 POLE; 10 POSITION
9
More than 8 switch sections, specify on CONFIGURATION FORM, page N–15 and consult Customer Service Center.
1-8Number of switch sections in assembly, includes endplates.
0Switch section only, no assembly. Blank bodies are considered sections; endplates are not sections.Must be ordered with 09 or 19 mounting style options, see pages N–10 and N–11.3
THUMBWHEEL SWITCHES
NOTE: For terminal location diagram, see page N-12.
T h u m b w h e e l & P u s h w h e e l
Available Terminations: 0, 1, N See fig. 1, page N-12.
Available Terminations: P See fig. 2, page N-12.
See fig. 1, page N-12.
Available Terminations: 0, 1, N Available Terminations: 0, 1, N See fig. 1, page N-12.
N = Number of sections.
PANEL MOUNTING
09
SWITCH SECTION ONLY–UNASSEMBLED WITHOUT ENDPLATES OR SPACERS (Must be ordered with number of sections option “0”, see Page N–9.)
00
SWITCH ASSEMBLY W/ ENDPLATES–.315 (8,00) SECTION PITCH
Type 0 Snap-In Front Mount
23
COMPLEMENT OF BCD 1-2-4-8;10 POSITION
71
BINARY CODED HEXADECIMAL,16 POSITION
31
BCD 1-2-4-8; 10 POSITION
27
BCD 1-2-4-8; 10 POSITION
NOTE:Endplates, blank sections, spacers
and assembly hardware available separately, see pages N–13 and N–14.
(.315 x N)+ .326(8,00 x N) + (8,28)
00
DIM. ‘A’MOUNTING STYLE
N = Number of sections.Recommended panel thickness:
0.46-.125(1,16-3,18)
Thumbwheel & Pushwheel
N = Number of sections.
PANEL MOUNTING
Mtg. Holes
N = Number of sections.
(.350 x N)+ .560(8,89 x N) + (14,22)
(.350 x N)+ .340(8,89 x N) + (8,64)
10
DIM. ‘B’
DIM. ‘A’MOUNTING STYLE
N = Number of sections.Recommended panel thickness:
0.46-.125(1,16-3,18)
20
SWITCH ASSEMBLY W/ ENDPLATES–.350 (8,89) SECTION PITCH
29
SWITCH SECTION ONLY–UNASSEMBLED WITHOUT ENDPLATES OR SPACERS (Must be ordered with number of sections option “0”, see Page N–9.)
19
SWITCH SECTION ONLY–UNASSEMBLED WITHOUT ENDPLATES OR SPACERS (Must be ordered with number of sections option “0”, see Page N–9.)
10
SWITCH ASSEMBLY W/ ENDPLATES–.350 (8,89) SECTION PITCH
Type 1 Rear Mount
Type 2 Rear Mount
NOTE:Endplates, blank sections, spacers and
assembly hardware available separately, see pages N–13 and N–14.
T h u m b w h e e l & P u s h w h e e l
Signal traces cut except for common(s).
FIG. 1
FIG. 2
9
ANY COMBINATION OF TERMINATION
CONFIGURATIONS OR SPECIAL TERMINATIONS.P
SOLDER PINS WITH .156” SPACING
N
SOLDER PINS WITH .100” SPACING
1
TYPE 1, EXTENDED TYPE 0
TYPE 0
3
SEALED SWITCHING CONTACTS AND DUST LENS
2DUST LENS. (Protects the character face of the wheel from abrasion and dirt).1SEALED SWITCHING CONTACTS. (Sealing is by means of an o-ring rotary seal and a cured-in-place elastomer gasket.Switching contact area is protected from moisture, oil, and airborne contaminants.)0UNSEALED SWITCHING CONTACTS.
MATTE BLACK HOUSING (Gloss black wheel with white characters; no stops.)
PC Board 1/32" (0,79) thick.
NOTE:See function codes, pages N–9 and N–10, for signal locations.
NOTE:Stop pins are available separately, see page N–14.
Dust Lens
NOTE: All terminal holes shown may not be present for all function codes, consult Customer Service Center.
Terminal connector available for termination options 0 & 1, see page N–14.Specify on configuration form, page N–15and consult Customer Service Center.
Terminal Location Numbers
NOTE:Termination option N (RoHS compliant) replaced termination option 3 (Non-RoHS compliant).
Termination option P (RoHS compliant) replaced termination option B (Non-RoHS compliant).
Thumbwheel & Pushwheel
T h u m b w
h e
e l & P u s h w h e e l
PART NO.
605A00000PC
605A02000SOLDER LUG
Fits 0 & 1 terminations only.
Terminal connector
Screws for field assembly of thumbwheel switches (2 screws needed per assembly + 403500000 nuts)
605A00000605A02000
Thumbwheel & Pushwheel