automotive_handbook Altera汽车级产品系列

The Automotive-Grade Device Handbook

101 Innovation Drive

San Jose, CA 95134

https://www.wendangku.net/doc/e216157110.html,

AUT5V1-1.2

Copyright ? 2010 Altera Corporation. All rights reserved. Altera, The Programmable Solutions Company, the stylized Altera logo, specific device designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of Altera Corporation in the U.S. and other countries. All other product or service names are the property of their respective holders. Altera products are protected under numerous U.S. and foreign patents and pending ap-plications, maskwork rights, and copyrights. Altera warrants performance of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information, product, or service described herein except as expressly agreed to in writing by Altera Corporation. Altera customers are advised to obtain the latest version of device specifications before relying on any published information and before placing orders for products or services.

? March 2010Altera Corporation

The Automotive-Grade Device Handbook

Contents

About this Handbook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . About–3

How to Contact Altera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3Typographic Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3

Chapter 1.Introduction

Altera Automotive-Grade Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1Altera Automotive Qualifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2Supported Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3Document Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3

Chapter 2.MAX 7000A Devices

Supported Automotive-Grade Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1Device Ordering Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1Quartus II Software Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2Power Analysis and Estimation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3PowerPlay Early Power Estimator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3PowerPlay Power Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3DC and Timing Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–4Pin-Out Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–4Package and Board Layout Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–4Document Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5

Chapter 3.MAX II Devices

Supported Automotive-Grade Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1Device Ordering Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1Quartus II Software Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–2Power Analysis and Estimation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–3PowerPlay Early Power Estimator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–3PowerPlay Power Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–3DC and Timing Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–4Pin-Out Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–4Package and Board Layout Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–4Document Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–5

Chapter 4.Cyclone Devices

Supported Automotive-Grade Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1Device Ordering Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1Quartus II Software Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2Power Analysis and Estimation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2PowerPlay Early Power Estimator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2PowerPlay Power Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–3DC and Timing Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–4Pin-Out Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–4Package and Board Layout Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–4Document Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–4

Chapter 5.Cyclone II Devices

Supported Automotive-Grade Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1

iv Contents Device Ordering Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1 Quartus II Software Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2 Power Analysis and Estimation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3 PowerPlay Early Power Estimator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3 PowerPlay Power Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3 DC and Timing Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–4 Pin-Out Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–5 Package and Board Layout Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–5 Document Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–5

Chapter6.Cyclone IV Devices

Supported Automotive-Grade Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–1 Device Ordering Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–2 Quartus II Software Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–2 Power Analysis and Estimation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–3 PowerPlay Early Power Estimator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–3 PowerPlay Power Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–3 DC and Timing Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–4 Pin-Out Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–5 Package and Board Layout Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–5 Document Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–5 Chapter7.HardCopy II Devices

Supported Automotive-Grade Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–1 Device Ordering Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–1 Quartus II Software Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–2 Power Analysis and Estimation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–2 PowerPlay Early Power Estimator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–2 PowerPlay Power Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–3 DC and Timing Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–3 Pin-Out Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–4 Package and Board Layout Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–4 Document Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–4 The Automotive-Grade Device Handbook? March 2010Altera Corporation

? March 2010Altera Corporation

The Automotive-Grade Device Handbook

Chapter Revision Dates

The chapters in this book, The Automotive-Grade Device Handbook, were revised on the following dates. Where chapters or groups of chapters are available separately, part numbers are listed.

Chapter 1

Introduction Revised:March 2010Part Number:AUT51001-1.2Chapter 2

MAX 7000A Devices Revised:March 2010Part Number:AUT51002-1.2Chapter 3

MAX II Devices Revised:March 2010Part Number:AUT51003-1.2Chapter 4

Cyclone Devices Revised:March 2010Part Number:AUT51004-1.2Chapter 5

Cyclone II Devices Revised:March 2010Part Number:AUT51005-1.2Chapter 6

Cyclone IV Devices Revised:March 2010Part Number:AUT51008-1.0Chapter 7

HardCopy II Devices Revised:March 2010Part Number:AUT51007-1.2

2Chapter Revision Dates The Automotive-Grade Device Handbook? March 2010Altera Corporation

?March 2010Altera Corporation

The Automotive-Grade Device Handbook

About this Handbook

This handbook provides comprehensive information about the Altera ? automotive-grade devices.

How to Contact Altera

For the most up-to-date information about Altera products, refer to the following table.

Typographic Conventions

This document uses the typographic conventions shown below.

Contact (1)

Contact Method

Address

T echnical support Website https://www.wendangku.net/doc/e216157110.html,/support T echnical training Website https://www.wendangku.net/doc/e216157110.html,/training Email custrain@https://www.wendangku.net/doc/e216157110.html, Product literature Website https://www.wendangku.net/doc/e216157110.html,/literature Altera literature services Email literature@https://www.wendangku.net/doc/e216157110.html, Non-technical support (General)

(Software Licensing)(Quality)Email

nacomp@https://www.wendangku.net/doc/e216157110.html, Email

authorization@https://www.wendangku.net/doc/e216157110.html, Email

customer-quality@https://www.wendangku.net/doc/e216157110.html,

Note to table:

(1)You can also contact your local Altera sales office or sales representative.

Visual Cue Meaning

Bold Type with Initial Capital Letters Command names, dialog box titles, checkbox options, and dialog box options are shown in bold, initial capital letters. Example: Save As dialog box. bold type

External timing parameters, directory names, project names, disk drive names,

filenames, filename extensions, and software utility names are shown in bold type. Examples: f MAX , \qdesigns directory, d: drive, chiptrip.gdf file.

Italic T ype with Initial Capital Letters Document titles are shown in italic type with initial capital letters. Example: AN 75: High-Speed Board Design.

Italic type

Internal timing parameters and variables are shown in italic type. Examples: t PIA , n + 1.

Variable names are enclosed in angle brackets (< >) and shown in italic type. Example: , .pof file.

Initial Capital Letters Keyboard keys and menu names are shown with initial capital letters. Examples: Delete key, the Options menu.

“Subheading Title”

References to sections in a document and titles of on-line help topics are shown in quotation marks. Example: “T ypographic Conventions.”

1–4

Chapter :

Typographic Conventions

The Automotive-Grade Device Handbook ?March 2010Altera Corporation

Courier type

Signal and port names are shown in lowercase Courier type. Examples: data1, tdi , input. Active-low signals are denoted by suffix n , e.g., resetn .Anything that must be typed exactly as it appears is shown in Courier type. For example: c:\qdesigns\tutorial\chiptrip.gdf . Also, sections of an actual file, such as a Report File, references to parts of files (e.g., the AHDL keyword SUBDESIGN ), as well as logic function names (e.g., TRI ) are shown in Courier.

1.,

2.,

3., and a., b., c., etc.Numbered steps are used in a list of items when the sequence of the items is important, such as the steps listed in a procedure.

■●?

Bullets are used in a list of items when the sequence of the items is not important. v The checkmark indicates a procedure that consists of one step only.1

The hand points to information that requires special attention.

c The caution indicates require

d information that needs special consideration and understanding and should b

e read prior to starting or continuing with the procedure or process.

w

The warning indicates information that should be read prior to starting or continuing the procedure or processes.

r The angled arrow indicates you should press the Enter key.f

The feet direct you to more information on a particular topic.

Visual Cue

Meaning

? March 2010Altera Corporation

The Automotive-Grade Device Handbook

1.Introduction

Altera Automotive-Grade Devices

The Altera ? automotive product portfolio consists of the best-in-class end-application solutions, devices, and development tools supporting the automotive industry. This select group of automotive-grade devices provides engineers with the design

flexibility and short time-to-market that programmable logic is well-known for, while meeting the high-quality standards and extended temperature range needed for automotive electronics.

Altera is the only supplier offering both programmable devices and structured ASICs. Whether you need a simple low-cost, low-power glue logic or a complex graphics controller solution driving your in-dash infotainment display, Altera has the reference designs and expertise to help you succeed in the market. The Altera automotive solutions offer the following advantages:

■

Reference designs or design examples for infotainment, driver assistance, hybrid engineer control units, and other electronic modules.

■

30–50% lower power consumption in Altera CPLDs and FPGAs compared to competitor products.

■

Unique FPGA-to-structured-ASIC flow which Stratix ?II devices are converted to HardCopy ?II devices resulting in a quick prototyping process, rapid production ramp, and lower costs.

■

Extensive range of on-chip functionalities and IP cores. Examples of on-chip functionalities include RAM blocks, DSP blocks, and PLLs. Examples of IP cores include the Nios ?II 32-bit embedded soft processor, Controller Area Network (CAN), and Media Oriented Systems Transport (MOST).

■

AEC-Q100 qualified devices, TS-16949 certified manufacturing sites, and PPAP documentation.

f

For more information about the Altera automotive solutions, visit https://www.wendangku.net/doc/e216157110.html,/end-markets/auto/aut-index.html .This chapter contains the following sections:

■“Altera Automotive Qualifications”■

“Supported Devices”

AUT51001-1.2

Altera Automotive Qualifications

Altera Automotive Qualifications

The Altera automotive-grade devices offer the same functionalities as commercial and

industrial-grade devices, but operate over the full automotive temperature range

(T junction=–40°C to 125°C).

Altera is a member of the Automotive Electronics Council (AEC) and adheres to the

automotive quality standard, AEC-Q100.

f For device-specific details on the AEC-Q100 qualification testing, contact Altera at

customer-quality@https://www.wendangku.net/doc/e216157110.html,.

f For more information on the AEC-Q100 qualification, refer to

https://www.wendangku.net/doc/e216157110.html,/AECDocuments.html.

Altera is also an ISO-9001 certified supplier. Altera’s manufacturing fab partners

(TSMC and Wafertech) and its packaging and test partners (ASE and AMKOR)

producing automotive-grade products are registered and certified to the ISO and TS-

16949 quality standards.

f To view the certificates, refer to https://www.wendangku.net/doc/e216157110.html,/end-markets/auto/quality/aut-

quality.html.

Altera performs stringent reliability qualification and monitoring on a product family

basis. Altera devices exceed the reliability requirements established by the Electronic

Industries Association (EIA) and the Joint Electron Device Engineering Council

(JEDEC). JEDEC qualification tests ensure that Altera devices meet or exceed these

reliability standards.

f For more information on the reliability qualification and monitorin

g programs for

Altera products, refer to the Altera Reliability Report.

All Altera automotive-grade devices have a Production Part Approval Process

(PPAP) document.

f For device-specific details on the PPAP documentation, contact Altera at

customer-quality@https://www.wendangku.net/doc/e216157110.html,.

The Automotive-Grade Device Handbook? March 2010Altera Corporation

Supported Devices

? March 2010Altera Corporation The Automotive-Grade Device Handbook

Supported Devices

Altera offers automotive-grade products in the following integrated circuit (IC)

categories: CPLDs, FPGAs, and structured ASICs. Also available are configuration IC devices that can be used to program the FPGAs.

Table 1–1 shows the product families offering automotive-grade devices.Document Revision History

Table 1–2 shows the revision history for this document.Table 1–1.The Altera Automotive-Grade Products (Note 1)

Category Product Family Description

IC, CPLD MAX 7000A High-performance, glue logic CPLDs (5-V I/O compatible)IC, CPLD MAX II High-density, low-power glue logic CPLDs IC, FPGA Cyclone Low-cost, simple FPGAs IC, FPGA Cyclone II Low-cost, feature-rich FPGAs

IC, FPGA Cyclone IV

Low-cost, lowest-power, feature-rich FPGAs IC, ASIC

HardCopy II

Low-cost, one-million-gate structured ASICs

Note to Table 1–1:

(1)Refer to the following chapters for the complete list of automotive-grade devices.

Table 1–2.Document Revision History

Date V

ersion Changes

March 2010v1.2Removed Referenced Documents section.

October 2008v1.1Converted to new template.February 2008

v1.0

Initial release.

Document Revision History The Automotive-Grade Device Handbook? March 2010Altera Corporation

? March 2010Altera Corporation

The Automotive-Grade Device Handbook

2.MAX 7000A Devices

Supported Automotive-Grade Devices

Altera offers MAX ?7000A devices in the automotive temperature range. These devices are available only in the –10 speed grade.

Table 2–1 shows the automotive-grade devices in the MAX 7000A family.This chapter contains the following sections:

■“Device Ordering Codes”■“Quartus II Software Support”■“Power Analysis and Estimation”■

“DC and Timing Specifications”

Device Ordering Codes

Figure 2–1 describes the ordering codes for automotive-grade devices offered in the MAX 7000A family.

f

For more information about a specific package, refer to the Altera Device Package Information Data Sheet .

Table 2–1.Automotive-Grade MAX 7000A Devices

Device Ordering Code Package EPM7032AETA44-10N 44-Pin TQFP EPM7064AETA44-10N 44-Pin TQFP EPM7064AETA100-10N 100-Pin TQFP EPM7128AETA100-10N 100-Pin TQFP EPM7128AETA144-10N

144-Pin TQFP

AUT51002-1.2

Quartus II Software Support

The Automotive-Grade Device Handbook ? March 2010Altera Corporation

Quartus II Software Support

The Altera ? Quartus ?II design software supports the MAX 7000A devices in the automotive temperature range. The Quartus II software includes hardware description language (HDL) and schematic design entry, compilation and logic synthesis, full simulation and advanced timing analysis, and device programming.

f

For more information about the Quartus II software features, refer to the Quartus II Handbook .

To target an automotive-grade MAX 7000A device in your design, perform the following steps in the Quartus II software:

1.On the Assignments menu, click Device . The Settings dialog box appears.

2.In the Family drop-down list, select MAX7000AE .

3.Under Target device, select Specific device selected in ‘Available devices’ list .

4.In the Available devices list, select the appropriate ordering code, as shown in

Table 2–1.

1

The Quartus II software does not show the “N” suffix, which indicates a lead-free device. For example, the EPM7032AETA44-10N device is shown only as EPM7032AETA44-10.

5.Click OK .

Figure 2–1.Automotive-Grade MAX 7000A Device Ordering Information

A: A u tomoti v e T emperat u re (T J = –40°C to 130°C)

Power Analysis and Estimation

1Support for the automotive-grade MAX7000A devices is only available in the

Quartus II software version 7.2SP1 and later.

Power Analysis and Estimation

Altera provides the following power analysis and estimation tools for your design:

■“PowerPlay Early Power Estimator”

■“PowerPlay Power Analyzer”

PowerPlay Early Power Estimator

The PowerPlay Early Power Estimator (EPE) is a power estimation tool that helps you

estimate the power consumption of your design during the system planning phase for

proper power supply planning and consideration. The EPE allows you to enter design

information based on architectural features and calculates the power consumed by

each architectural feature. Inputs to the EPE are environmental conditions and device

resources (such as clock frequency) that you expect to use in your design. The EPE

then calculates the static and dynamic power, current estimates, and thermal analysis

for the design.

You can either enter the design information manually into the spreadsheet or import a

power estimator file of a fully or partially completed design from the Quartus II

software. After importing a file, you can edit some of the input parameters including

V CCINT, ambient temperature, airflow, clock frequency, and toggle percentage to suit

your system requirements.

1The value obtained from the EPE is only an estimation and should not be used as a specification. The accuracy of the EPE results is dependent on how close your input of

the design information into the EPE resembles that of the final design.

PowerPlay Power Analyzer

The PowerPlay Power Analyzer tool in the Quartus II software is a power analysis

tool that helps you calculate your design power consumption accurately to ensure

thermal and power supply budgets are not violated after your design is complete. The

PowerPlay Power Analyzer tool requires your design to be synthesized and fitted to

the target device. Availability of information such as design resources, how the

design is placed and routed on the target device, and the I/O standards assigned to

each I/O cell allow the PowerPlay Power Analyzer tool to provide accurate power

estimation.

The process of using the PowerPlay Power Analyzer tool consists of three parts:

specifying sources of input data, specifying operating conditions, and running the

PowerPlay Power Analyzer tool.

The input data consists of the signal activities data (toggle rates and static

probabilities) of the compiled design. Signal activity data can be derived from

simulation results, user assignment in the Assignment Editor, user-defined default

toggle rate, and vectorless estimation.

The operating conditions include device power characteristic, ambient and junction

temperature, cooling solution, and board thermal model, all of which can be set in the

Quartus II software.

? March 2010Altera Corporation The Automotive-Grade Device Handbook

DC and Timing Specifications

The Automotive-Grade Device Handbook ? March 2010Altera Corporation

The PowerPlay Power Analyzer tool calculates the dynamic, static and I/O thermal power consumption, current consumed from voltage source, a summary of the signal activities used for analysis, and a confidence metric that reflects the overall quality of the data sources for the signal activities.

f

For more information about the Signal Activity Files (.saf ) and how to create them, refer to the Quartus II Simulator chapter in volume 3 of the Quartus II Handbook .f

For more information about the PowerPlay Power Analyzer tool, refer to the PowerPlay Power Analysis chapter in volume 3 of the Quartus II Handbook .

DC and Timing Specifications

The automotive-grade MAX 7000A devices have the same absolute maximum ratings, recommended operating conditions, and DC electrical characteristics as those

published for the MAX 7000A devices in the MAX 7000A Programmable Logic Device Data Sheet .

The timing specifications of the automotive-grade MAX 7000A devices are the same as those published for the MAX 7000A devices in the MAX 7000A Programmable Logic Device Data Sheet . The automotive-grade devices meet these timing specifications over the automotive temperature range (–40°C to 130°C).

Table 2–2 shows the automotive-grade MAX 7000A device ordering codes and their equivalent timing specifications.

Pin-Out Information

For details on the MAX 7000A device pin-outs, refer to the MAX 7000, MAX 7000A, and MAX 7000B Device Pin-Out Files web page.

Package and Board Layout Information

For package-related information (for example, dimensions and thermal resistance values) on MAX 7000A devices, refer to the Altera Device Package Information Data Sheet .

For PCB design guidelines, refer to AN114:Designing With High-Density BGA Packages for Altera Devices .

Table 2–2.Automotive-Grade MAX 7000A Device Ordering Codes and Their Equivalent Timing Specifications

Automotive-Grade Device

Ordering Code Device Timing Specification

Device Temperature Range Speed Grade

EPM7032AETA44-10N EPM7032AE –40°C to 130°C –10EPM7064AETA44-10N EPM7064AE –40°C to 130°C –10EPM7064AETA100-10N EPM7064AE –40°C to 130°C –10EPM7128AETA100-10N EPM7128AE –40°C to 130°C –10EPM7128AETA144-10N

EPM7128AE

–40°C to 130°C

–10

Document Revision History

? March 2010Altera Corporation The Automotive-Grade Device Handbook

Document Revision History

Table 2–3 shows the revision history for this document.Table 2–3.Document Revision History

Date V

ersion Changes

March 2010v1.2Removed Referenced Documents section.

October 2008v1.1Converted to new template.February 2008

v1.0

Initial release.

Document Revision History The Automotive-Grade Device Handbook? March 2010Altera Corporation

? March 2010Altera Corporation

The Automotive-Grade Device Handbook

3.MAX II Devices

Supported Automotive-Grade Devices

Altera offers MAX ?II devices in the automotive temperature range. These devices are available only in the –5 speed grade.

Table 3–1 shows the automotive-grade devices in the MAX II family.This chapter contains the following sections:

■“Device Ordering Codes”■“Quartus II Software Support”■“Power Analysis and Estimation”■

“DC and Timing Specifications”

Device Ordering Codes

Figure 3–1 describes the ordering codes for automotive-grade devices offered in the MAX II family.

f

For more information about a specific package, refer to the Package Information chapter of the MAX II Device Handbook .

Table 3–1.Automotive-Grade MAX II Devices

Device Ordering Code Package EPM240T100A5N 100-Pin TQFP EPM570T100A5N 100-Pin TQFP EPM570T144A5N 144-Pin TQFP EPM1270T144A5N 144-Pin TQFP EPM1270F256A5N 256-Pin FineLine BGA EPM2210F256A5N 256-Pin FineLine BGA EPM2210F324A5N

324-Pin FineLine BGA

AUT51003-1.2

Quartus II Software Support Figure3–1.Automotive-Grade MAX II Device Ordering Information

Nu m b er of pins for a partic u lar package

Quartus II Software Support

The Altera? Quartus?II design software supports the MAX II devices in the

automotive temperature range. The Quartus II software includes hardware

description language (HDL) and schematic design entry, compilation and logic

synthesis, full simulation and advanced timing analysis, and device programming.

f For more information about the Quartus II software features, refer to the Quartus II

Handbook.

To target an automotive-grade MAX II device in your design, perform the following

steps in the Quartus II software:

1.On the Assignments menu, click Device. The Settings dialog box appears.

2.In the Family drop-down list, select MAX II.

3.Under Target device, select Specific device selected in ‘Available devices’ list.

4.In the Available devices list, select the appropriate ordering code, as shown in

Table3–1.

1The Quartus II software does not show the “N” suffix, which indicates a

lead-free device. For example, the device EPM240T100A5N is shown only

as EPM240T100A5.

5.Click OK.

1Support for the automotive-grade MAX II devices is only available in the Quartus II software version 7.2SP1 and later.

The Automotive-Grade Device Handbook? March 2010Altera Corporation