VQP-100-3B中文资料
Features
·Universal AC input / Full range
·Built-in active PFC function, PF>0.95
·Protections:Short circuit/Over load/Over voltage
·Free air cooling convection
·CH4: Polarity is selectable
·Fixed switching frequency at 100KHz(Optional)
·3 year warranty
CH1CH2CH3CH4
DC output voltage5V 3.3V12V-12V
Output V.tolerance±3%±3%±6%±5%
Output rated current8A8A 2.2A0.6A
Output current range2-10A0-10A0.3-3A0-1A
Ripple & noise p-p100mV100mV150mV150mV
Line regulation±1%±1%±2%±1%
Load regulation±2%±2%±6%±2%
Max. output power100W
Efficiency74%
DC voltage adj.CH1,2: +10, -5%
Input voltage range90~264VAC 47~63Hz; 120-370VDC
AC current 1.5A/115V 0.75A/230V
Inrush current cold start<= 40A/230V
Leakage current<3.5mA/240VAC
Overload protection105%~150%, pulsing (hiccup mode), auto restart.
Over voltage protection CH1:5.75~6.75V CH2:3.8~4.4V type: shutdown reset:re-power on
Over temp. protection95°C±5°C TSW1 type:shutdown reset:auto recovery
Temperature coefficient±0.3%/ °C(0~50°C)
Set up, rise, hold up time800ms, 50ms, 16ms / 115, 230VAC
Power factor PF>0.95/230VAC, PF>0.98/115VAC
Vibration10~500Hz, 2G 10 min./1 cycle, period fo 60 min. each axes
Withstand voltage I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC for 1 min.
Isolation resistance I/P-O/P, I/P-FG, O/P-FG: 500VDC / 100M Ohms min.
Working temp., humidity-10°C~+60°C (refer to output derating curve), 20%-90% RH
Storage temp., humidity-20°C~+85°C, 10%-95% RH
Dimensions7.83x3.9x1.97 inches (199x99x50mm) case: 916A
Weight 1.61lbs (730gs)
Safety standards UL1950, TUV EN60950 approved
EMC standards EN55022 class B, EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-3-2,-3,
EN55024 verification
Notes: 1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient
2. Tolerance includes set up tolerance, line regulation, load regulation
3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor
4. Line regulation is measured from low line to high line at rated load
5. Load regulation is measured from 20% to 100% rated load, and other outputs at 60% rated load.
6. Each output provides up to maximum current, but total load can not exceed max. output power.
V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise customers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for customer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s published specifications. Nothing will be covered outside of standard product warranty.