74530-0002中文资料
FEATURES AND SPECIFICATIONS SPECIFICATIONS
Reference Information
Mates With: 91803-XXXX (jackscrew) Designed In: Millimeters
Electrical
Voltage: 30V AC per contact
Current: 0.5A per contact
Contact Resistance: 80 ohms
Dielectric Withstanding Voltage: 300V min. DC Insulation Resistance: 1000 Megohms minimum between adjacent contacts Mechanical
Mating Force: 55.5N (12.36 lbf.)
Unmating Force: 49.0N (11.02 lbf.) Durability: 250 cycles
Physical
Housing: Zinc die-cast
Contact: Gold flash over Nickel plating Plating: Contact Area – Nickel
Solder Tail Area – Nickel allover
Underplating – Gold flash over Paladium Nickel Operating Temperature: -20 to + 85°C
Features and Benefits
I Sturdy jackscrew hardware provides user with
guaranteed mating with the PCB connector
I Molex offers a total system solution providing an industry standard compatible interface with 4X mating connectors I High performance production test rack provides
100% eye pattern testing to SAS and SATA I/O
standards
I Break-out cables (SAS to SATA) provide an
external-to-internal connection
I LaneLink assemblies are SFF-8470 compliant to
meet industry specifications
LaneLink? assemblies feature sturdy jack-screw hardware to guarantee secure mating 0.50mm (.020") Pitch LaneLink? 4X Cable Assemblies 74527 SAS
74530 SATA I/O
The new 4X Serial Attached SCSI (SAS) and Serial ATA (SATA) cable assemblies are the latest addition to Molex’s extensive LaneLink product line. Molex’s superior design and engineering along with state-of-the-art manufacturing combine to provide a solution for all external, 4X SAS and SATA Input/Output (I/O) applications.
LaneLink 4X SAS and SATA I/O cable assemblies are designed and engineered to meet the architecture set forth by the T10 SCSI specification. The standard specifies a high-speed, point-to-point technology, initially designed to operate at speeds up to 3 Gbps, with a roadmap to operate at 12 Gbps. Customer protocol requirements determine which assembly is used, as both designs are identical.
With storage requirements escalating and becoming more complex, factors such as larger capacity, greater density, security, scalability and accessibility are more critical than ever. Enterprise solutions are recognizing increasing pressure for substantial capacity, performance, lower failure rates and greater choice of components. SAS and SATA I/O solutions meet these demands while providing the highest performance available.
Molex is an active member of the SCSI and SATA trade associations. LaneLink 4X assemblies have been accepted by multiple standards groups, or Multi-Source Agreement (MSA) groups, including the T10 SCSI specification, SAS, SATA I/O, 4X and 12X InfiniBand*, 10 Gigabit Ethernet and 10 Gigabit Fibre Channel.These 4X SAS and SATA I/O assemblies complement
the broad line of Molex’s LaneLink offerings. The
following list details Molex’s extensive LaneLink
product line:
I4X InfiniBand Latch Cable Assembly (Series 74506)
I4X 10GBASE-CX4 Latch Cable Assembly (Series
74526)
I4X and 12X InfiniBand Latch Receptacle (Series
91804)
I4X and 12X InfiniBand Jackscrew Receptacle
(Series 91803)
SAS (series 74527) cable assembly mating to 4X jackscrew receptacle (series 91803)
*InfiniBand is a registered trademark of the InfiniBand Trade Association
APPLICATIONS
0.50mm (.020") Pitch
LaneLink? 4X Cable Assemblies 74527 SAS
74530 SATA I/O
I Server storage applications
- Network Interface Cards (NIC) and Host Bus
Adapters (HBA), routers and servers, storage racks - Redundant Array of Integrated Discs (RAID) devices I Industry standard organizations:- 4X and 12X InfiniBand - 10 Gigabit Ethernet - 10 Gigabit Fibre Channel - T10 SCSI/SAS - T13 SATA - SFF Committee
Americas Headquarters Lisle, Illinois 60532 U.S.A.1-800-78MOLEX amerinfo@https://www.wendangku.net/doc/eb18484172.html, Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324feninfo@https://www.wendangku.net/doc/eb18484172.html, Far East South Headquarters Jurong, Singapore 65-6-268-6868fesinfo@https://www.wendangku.net/doc/eb18484172.html, European Headquarters Munich, Germany 49-89-413092-0eurinfo@https://www.wendangku.net/doc/eb18484172.html,
Corporate Headquarters 2222 Wellington Ct.Lisle, IL 60532 U.S.A.630-969-4550Fax:630-969-1352
Visit our Web site at https://www.wendangku.net/doc/eb18484172.html,/product/io/lanelink.html
Order No. USA-309
Printed in USA/JI/2005.05
?2005 Molex
ORDERING INFORMATION Complete end-to-end solution available from Molex; controller card to backplane to SAS or SATA drive