Single-Channel
Power Distribution Switch
Pin Assignments
MS Package (MSOP-8)
*The pin 6 should be considered as VOUT when circuit design
and PCB layout, but it is NC pin actually.
SO Package (SOP-8)
AS5 Package (SOT-23-5)
Block Diagram
Electrical Characteristics
Electrical Characteristics
(V IN=5V, C IN=C OUT=1μF, T A=25°C, unless otherwise specified.)
Parameter Symbol Conditions Min Typ Max Unit Shutdown Pull Low Resistance R PD80 ?
T SD135 °C Thermal Shutdown Threshold
(Note2)
?T SD Hysteresis 20 °C Note 2:Guarantee by design.
Test Circuit
Outline Information
MSOP- 8 Package (Unit: mm)
DIMENSION IN MILLIMETER
SYMBOLS UNIT
MIN MAX A 0.75 1.10 A1 0.00 0.15 A2 0.75 0.95 B 0.25 0.35 D 2.90 3.10 E 4.80 5.00 E1 2.90 3.10 e 0.60 0.70 L
0.40
0.80
Note :Followed From JEDEC MO-187-E.
Carrier dimensions
Outline Information (Continued)
SOP- 8 Package (Unit: mm)
Note :Followed From JEDEC MO-012-E.
DIMENSION IN MILLIMETER
SYMBOLS UNIT
MIN MAX A 1.40 1.75
A1 0.10 0.25 A2 1.30 1.50 B 0.31 0.51 D 4.80 5.00 E 3.80 4.00 e 1.20 1.34 H
5.80
6.20 L
0.40
1.27
Carrier dimensions
Outline Information (Continued)
SOT-23-5 Package (Unit: mm)
DIMENSION IN MILLIMETER
SYMBOLS UNIT
MIN MAX A 0.90 1.40
A1 0.00 0.15 A2 0.90 1.30 B 0.35 0.50 D 2.80 3.00 E 2.60 3.00 E1 1.50 1.70 e 0.90 1.00 e1 1.80 2.00 L
0.35
0.55
Note :Followed From JEDEC MO-178-C.
Carrier dimensions
Life Support Policy
Fitipower’s products are not authorized for use as critical components in life support devices or other medical systems.