FEATURES ? Compact Size
? Requires Minimal Behind Panel Space ? 1 Million Rotational Cycles for Low and Medium T orque, 1/2 Million for High
? 3 Million Rotations for Non-Detent Styles ? Optional Integral Pushbutton ? Choices of Cable Length and
APPLICATIONS
? Global Positioning/Driver Information Systems ? Medical Equipment
SERIES 62S
Compact 1/2'' Package
Grayhill, Inc. ? 561 Hillgrove Avenue ? LaGrange, Illinois 60525-5997 ? USA ? Phone: 708-354-1040 ? Fax: 708-354-2820 ? https://www.wendangku.net/doc/f9802800.html,
SPECIFICATIONS
Environmental Specifications
Operating Temp. Range: -40°C to 85°C
Storage Temp. Range: -55°C to 100°C
Humidity: 96 Hours at 90–95% humidity at 40°C
Mechanical Vibration: Harmonic motion with amplitude of 15G's, within a varied frequency of 10 to 2000 Hz
Mechanical Shock: Test 1: 100G for 6 mS, half sine wave with a velocity change of 12.3 ft/s; Test 2: 100G for 6 mS, sawtooth wave with a velocity change of 9.7 ft/s
Rotary Electrical and Mechanical Specifications
Operating Voltage: 5.00 ±0.25 Vdc Supply Current: 25mA max at 5.25Vdc Output: Open collector phototransistor, external pull up resistors are required
Output Code: 2-Bit quadrature, channel A leads channel B by 90° electrically during clockwise rotation of the shaft Logic Output Characteristics:
Logic High shall be no less than 3.8 Vdc Logic Low shall be no greater than 0.8Vdc Minimum Sink Current: 2.0 mA
Power Consumption: 132mW maximum (includes power in 2 pull-up resistors)Mechanical Life: Non-Detent 3 Million Cycles Low & Medium 1 Million Cycles High 1/2 Million Cycles
1 cycle is a rotation through all positions and a full return
Torque shall be within 50% of initial value throughout life
Mounting Torque: 15 in-lbs maximum Shaft Push-Out Force: 45 lbs minimum Shaft Pull-Out Force: 45 lbs minimum
Terminal Strength: 15 lbs minimum terminal pull-out force for cable or header termination Solderability: 95% free of pin holes and voids
Pushbutton Electrical & Mechanical Specifications
Rating: 10 mA at 5 Vdc Contact Resistance: <10?
Life: 3 million actuations minimum
Contact Bounce: <4 ms Make, <10 ms Break
Actuation F orce:
9-950±150
g rams, 5-510±150 grams, 4-400±100 grams, 3-300±90 grams, 2-200±75 grams
Shaft Travel: .025±.010 inch
Materials and Finishes
Bushing: Zamak 2
Shaft: Aluminum or Zamak 2Retaining Ring: Stainless steel
Pushbutton Actuator: Zytel 70G33L Detent Spring: Music wire Detent Ball: Stainless steel
CIRCUITRY, TRUTH TABLE, AND WAVEFORM Standard Quadrature 2-Bit Code
Code Housing: Polyamide polymer, nylon 6/10 alloy UL94HB
Code Rotor: Delrin 100
Printed Circuit Boards: NEMA grade FR-4,double clad with copper, plated with gold over nickel
Infrared Emiting Diode Chips: Gallium aluminum arsenide
Silicon Phototransistor Chips: Gold and Aluminum Alloys
Resistor: Metal oxide on ceramic substrate Solder Pins: Brass, plated with tin Pushbutton Dome: Stainless steel Backplate: Stainless steel
Cable: Copper stranded with topcoat in PVC insulation (Cable version only)
Connector (.050 Center): PA4.6 with tin over nickel plated phosphor bronze
Connector (.100 Center): Nylon UL94V-2, tin plated copper alloy
Label: TT406 Thermal transfer cast film Solder: Sn/Ag/Cu, Lead-Free, No Clean Lubricating Grease: NYE nyogel 774L Hex Nut: Nickel, plated with brass Lockwasher: Stainless steel
Header: Hi-T emp glass filled thermoplastic UL94V-0, phoshor bronze (pin versions only)Strain Relief: Glass filled thermoplastic (.100 center cable versions only)
OPTIONS
Contact Grayhill for custom terminations, shaft and bushing configurations, rotational torque pushbutton force, and code output. Control knobs are also available.
62SXX-XX-040X
Termination
C = .050 Center Ribbon Cable with Connector
S = .050 Center Ribbon Cable with .100 Stripped End P = .050 Center Pins with .130 Length
CH = .100 Center Ribbon Cable with Connector
SH = .100 Center Ribbon Cable with .100 Stripped End PH = .100 Center Pins with .230 Length Cable Length
Cable Termination: 040=4.0in or 040in. Cable is terminated with Amp Connector P/N 3-640442-6
See Amp Mateability Guide for mating connector details.
Pushbutton Option
0 = NO PUSHBUTTON 4 = 400 Grams 9 = 950 Grams 3 = 300 Grams 5 = 510 Grams 2 = 200 Grams
Angle of Throw
45=45° for Code Change and 8 Detent Positions 30=30° for Code Change and 12 Detent Positions 22=22.5° for Code Change and 16 Detent Positions 18=18° for Code Change and 20 Detent Positions 15=15° for Code Change and 24 Detent Positions 11=11.25° for Code Change and 32 Detent Positions
Rotational Torque Option
N = Non-detent
L = Low Torque (available with 0, 4, 5, 9 pushbutton only) M = Medium Torque (available with 0, 5, 9 pushbutton only) H = High Torque (available with 0, 9 pushbutton only)
ORDERING INFORMATION
AVERAGE ROTATIONAL TORQUE SPECIFICATIONS LOW MEDIUM HIGH
±0.50 IN-OZ
±1.40 IN-OZ
±1.60 IN-OZ
8 POSITION 1.10 1.85 2.7512 POSITION 1.00 1.70 2.9516 POSITION 1.40 2.35 3.4020 POSITION 1.35 2.05 2.8024 POSITION 1.25 1.95 2.9532 POSITION 0.95 1.40 2.15
Grayhill, Inc. ? 561 Hillgrove Avenue ? LaGrange, Illinois 60525-5997 ? USA ? Phone: 708-354-1040 ? Fax: 708-354-2820 ? https://www.wendangku.net/doc/f9802800.html,
分销商库存信息:
GRAYHILL
62S15-M5-P62S22-M5-020C62S22-M5-050C 62S11-M9-040SH62S11-M5-050C62S11-M0-P
62S11-M0-050C62S15-M0-060C62S11-M0-060C 62S22-M0-060C62S11-M5-P62S22-M5-P
62S11-M5-060C62S15-M5-060C62S22-M5-060C 62S15-M0-P62S11-M0-020C62S22-M0-020C 62S22-M0-P62S22-M0-050C62S11-M5-020C