CCM04-1801中文资料

Dimensions are shown in mm Dimensions subject to change

https://www.wendangku.net/doc/fa997670.html,

Contacts Copper alloy

Plating Contact area : Gold alloy inlay Terminals : Tin lead (2μmin)

Moldings

High temp. thermoplastic UL 94V-0 rated

Number of Contacts 6, 8

Contact force

0.25 N min / 0.5 N max

Card detection switch 0.8 N max for actuation (end travel switch actuation force actuates when card is 0,9 mm from card stop)1.8 N max for complete depression

Vibration Frequency 10 to 500 Hz. Acceleration 50m/s 2Duration 6 hours - amplitude 0,35 mm Max electrical discontinuity 1μs

Shock

Peak value 500 m/s 2– Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 μs

Insulation resistance 1,000 M ?min Resistance 100 m ?max

Dielectric strength 750 Vrms min

Card detection switch Normally open (closes on card insertion)Contact resistance 100m ?max Dielectric strength 250 Vrms min

Current rating 1 mA min/ 10 mA max Maximum power 0.2 VA

Operating temperature -40°C to +85°C

Soldering temperature Temperature/time pro?le acc. to CECC00802para. 6.1, Fig. 3 with peak temperature 250°C Damp heat IEC 512 test number 11c (10 days)Card detection switch Sealed IP 54 For CCM04 1889 Sealed against dust for other versions

5 reels per box.

CCM04 MKII

The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided by the connector itself).

The CCM04 low pro?le without card guidance is dedicated to applications where the overall height of the

connector is paramount. A range of low pro?le CCM04 connectors are available with 1.25 mm thick moldings.The wide choice of contact con?gura-tions and molding heights suit a broad range of applications.Features

? Available in two molding heights 1,25mm and 2,75 mm.

? The integrated card detection switch (optional) is sealed against dust and grit.? By using an inlay ?nish in the contact area, the life of the precious metal is extended by more than 10 times that of standard gold plating.

? The height of the contact above the insulator is 0,75 mm, allowing a wider tolerance for the card entry slot.? The contact area is spooned to reduce the risk of accidental (or deliberate) damage and to optimize the electrical connection with the card.? The tip of the contact is protected by the molding so that it cannot catch on the card as the card is being inserted.? The contact design ensures a

consistent and reliable contact force over the life of the connector.? Robustly formed printed circuit tails are well protected by the insulator body.

? The moldings are made from high temperature thermoplastic suited for infrared and convection soldering processes.

? With tape and reel packaging as

standard, the connectors are designed

to be automatically picked & placed.

Part Number

Number of Contacts

Card Presence Quantity per Reel

Switch CCM04-18016No 1800CCM04-18148No 1300CCM04-18898Yes 1000CCM04-13168Yes 700CCM04-13178Yes 700

CCM04 MK II

Dimensions are shown in mm

Dimensions subject to change

https://www.wendangku.net/doc/fa997670.html,

CCM04 MK II

Dimensions are shown in mm

Dimensions subject to change

https://www.wendangku.net/doc/fa997670.html,