3KASMC33中文资料

Vishay General Semiconductor

3KASMC10 thru 3KASMC43A

New Product

Document Number https://www.wendangku.net/doc/f32656188.html,

Surface Mount Automotive Transient Voltage Suppressors

High Temperature Stability & High Reliability Conditions

FEATURES

?Patented PAR ? construction

?Available in Unidirectional polarity only

?3000 W peak pulse power capability with a

10/1000 μs waveform ?Excellent clamping capability ?Very fast response time

?Low incremental surge resistance

?Typical I D less than 1.0 μA above 13 V rating

?Meets MSL level 1, per J-STD-020C, LF max peak of 260 °C ?Solder Dip 260 °C, 40 seconds

?Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication.

MECHANICAL DATA Case: DO-214AB (SMC)

Epoxy meets UL 94V-0 flammability rating

Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D

HE3 suffix for high reliability grade (AEC Q101qualified)

Polarity:

Color band denotes cathode end

*Patent #'s 4,980,315 5,278,094

P a t

e

n t e

d *

5,166,769 DO-214AB (SMC)

MAJOR RATINGS AND CHARACTERISTICS

V WM 10 V to 43 V P PPM 3000 W P D 6.0 W I FSM 200 A T j max.

185 °C

Note:

(1) Non-repetitive current pulse, per Fig. 3 and derated above T A = 25 °C per Fig. 2

(2) Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum

MAXIMUM RATINGS (T A = 25°C unless otherwise noted)

PARAMETER

SYMBOL VALUE UNIT Peak pulse power dissipation with a 10/1000 μs waveform (1) (Fig. 3)P PPM Minimum 3000W Peak power pulse current with a 10/1000 μs waveform (1) (Fig. 1)I PPM see next table

A Peak forward surge current 8.3 ms single half sine-wave (2)I FSM 200A Power dissipation on infinite heatsink at T L = 75 °C (Fig. 6)P D 6.0W Maximum instantaneous forward voltage at 100 A (2)V F 3.5V Operating junction and storage temperature range T J , T STG

- 65 to + 185

°C

https://www.wendangku.net/doc/f32656188.html,

Document Number 88480

Vishay General Semiconductor

3KASMC10 thru 3KASMC43A

Note:

(1) Pulse test: t p ≤ 50 ms

(2) Surge current waveform per Fig. 3 and derated per Fig. 2(3) All terms and symbols are consistent with ANSI/IEEE C62.35

ELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted)

DEVICE TYPE

DEVICE MARKING CODE

BREAKDOWN VOLTAGE V (BR) (1) AT I T

(V)

TEST

CURRENT I T

(mA)

STAND-OFF VOLTAGE

V WM (V)MAXIMUM

REVERSE LEAKAGE AT V WM I R (μA)

T J = 150 °C MAXIMUM REVERSE LEAKAGE AT V WM I D (μA)

MAXIMUM PEAK PULSE SURGE CURRENT I PPM (2) (A)

MAXIMUM CLAMPING VOLTAGE AT I PPM

V C (V)MIN MAX

3KASMC103AW 11.113.6 1.010 5.05016018.83KASMC10A 3AX 11.112.3 1.010 5.05017717.03KASMC113AY 12.214.9 1.011 5.05014920.13KASMC11A 3AZ 12.213.5 1.011 5.05016518.23KASMC123BD 13.316.3 1.012 2.02013622.03KASMC12A 3BE 13.314.7 1.012 2.02015119.93KASMC133BF 14.417.6 1.013 2.02012623.83KASMC13A 3BG 14.415.9 1.013 2.02014021.53KASMC143BH 15.619.1 1.014 1.01011625.83KASMC14A 3BK 15.617.2 1.014 1.01012923.23KASMC153BL 16.720.4 1.015 1.01011226.93KASMC15A 3BM 16.718.5 1.015 1.01012324.43KASMC163BN 17.821.8 1.016 1.01010428.83KASMC16A 3BP 17.819.7 1.016 1.01011526.03KASMC173BQ 18.923.1 1.017 1.01098.430.53KASMC17A 3BR 18.920.9 1.017 1.01010927.63KASMC183BS 20.024.4 1.018 1.01093.232.23KASMC18A 3BT 20.022.1 1.018 1.01010329.23KASMC203BU 22.227.1 1.020 1.01083.835.83KASMC20A 3BV 22.224.5 1.020 1.01092.632.43KASMC223BW 24.429.8 1.022 1.01076.139.43KASMC22A 3BX 24.426.9 1.022 1.01084.535.53KASMC243BY 26.732.6 1.024 1.01069.843.03KASMC24A 3BZ 26.729.5 1.024 1.01077.138.93KASMC263CD 28.935.3 1.026 1.01064.446.63KASMC26A 3CE 28.931.9 1.026 1.01071.342.13KASMC283CF 31.138.0 1.028 1.01060.050.03KASMC28A 3CG 31.134.4 1.028 1.01066.145.43KASMC303CH 33.340.7 1.030 1.01556.153.53KASMC30A 3CK 33.336.8 1.030 1.01562.048.43KASMC333CL 36.744.9 1.033 1.01550.859.03KASMC33A 3CM 36.740.6 1.033 1.01556.353.33KASMC363CN 40.048.9 1.036 1.02046.764.33KASMC36A 3CP 40.044.2 1.036 1.02051.658.13KASMC403CQ 44.454.3 1.040 1.02042.071.43KASMC40A 3CR 44.449.1 1.040 1.02046.564.53KASMC433CS 47.858.4 1.043 1.02039.176.73KASMC43A 3CT

47.8

52.8

1.0

43

1.0

20

43.2

69.4

Document Number https://www.wendangku.net/doc/f32656188.html,

3KASMC10 thru 3KASMC43A

Vishay General Semiconductor

Note:

(1) Mounted on minimum recommended pad layout

RATINGS AND CHARACTERISTICS CURVES (T A = 25 °C unless otherwise noted)

THERMAL CHARACTERISTICS (T A = 25°C unless otherwise noted)

PARAMETER

SYMBOL VALUE UNIT Thermal resistance junction to ambient air (1)R θJA 77.5°C/W

Thermal resistance Junction to leads R θJL

18.3

ORDERING INFORMATION

PREFERRED P/N UNIT WEIGHT (g)

PREFERRED PACKAGE CODE

BASE QUANTITY

DELIVERY MODE 3KASMC10AHE3/57T 0.21157T 8507" Diameter Plastic Tape & Reel 3KASMC10AHE3/9AT

0.211

9AT

3500

13" Diameter Plastic Tape & Reel

Figure 1. Peak Pulse Power Rating Curve Figure 2. Pulse Power or Current versus Initial Junction

Temperature

Figure 3. Pulse Waveform

Figure 4. Typical Junction Capacitance

https://www.wendangku.net/doc/f32656188.html, Document Number 88480

Vishay General Semiconductor

3KASMC10 thru 3KASMC43A

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

Figure 5. Maximum Non-Repetitive/Peak Forward Surge Current

Figure 6. Power Derating Curve

Legal Disclaimer Notice

Vishay

Notice

Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.

Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale.