K1000, S20K385 = 5 fully conforms to IEC 60286-2, while for lead spacings
= 7,5 and 10 the taping mode is based on this standard.The ordering tables on page 213 ff list disk types available on tape in detail, i.designation and ordering code. Taping mode and, if relevant, crimp style and lead spacing are cod-ed in the type designation. For types not listed please contact EPCOS. Upon request parts with lead spacing = 5 mm are available in Ammopack too.Designation system for taping mode 209
208
S S2S3S4S5
Taped, Ammopack
appended to the type designation.
The different tapes and matching reel types are identified by numbers as shown in the table on Types with lead spacing = 5, reel diameter 360 mm, have the code letter
lead spacing = 7,5 and 10 on 500-mm reels are identified by
Furthermore types with lead spacing = 5 are available in Ammopack, code letters
Versions G2, G3 and G4 are special tapes on 360-mm reels resp. Ammopack: G2 denotes the seat- = 18 for crimped versions. Tapes G3 and G4 are available on 360-mm reels in case the 500-mm reels are too big for your insertion machine.
oth crimped and straight leads are standard for taped disk varistors. The leads are differently crimped for technical reasons; the individual crimp styles are denoted by consecutive numbers S5) as shown in the dimensional drawings on page
The crimp styles of the individual types can be seen from the type designation in the ordering tables.
Type series SIOV-S10 is available with two different lead spacings:
= 5,0 (wire
= 7,5 (wire
For taped varistors having a different lead spacing from their untaped equivalents, the actual is The standard lead spacing of series SIOV-S10 is = 7,5. The version with = 5,0 has the
Assignment of taping mode to reel type Taping modes G2, G3, G4, GA and G2A: delivery upon request. is not compatible with insertion equipment because of its large diameter, type series upon request (taping mode G3).
Seating plane height for crimped types n
w approx. 45approx. 55approx. 59
54 max.64 max.72 max.
Reel
Tape
D i r e c t i o n o f u n r e e l i n g
5
5 Paper adhesive tape,
Taping in accordance with IEC 60286-2
W 0
2
W 0
H W 1
Direction of unreeling
2
W 0
H W 1
Tolerance
max. max.
0,05
0,3
0,8
0,8
2,0
0,5 min.
+ 0,75/– 0,5 max.
+ 2,0/– 0
0,5
max.
0,2 max. max.
Crimp style S2
h
1)
e
Type
SIOV-mm
S05K11
S05K210
S07K11
S07K210
S10K11
S10K320
S10K510(E2)(S3)(S5)
S10
Ordering code
Type series SIOV-S05, straight leads = 5,0
B72205S0110K111
B72205S0140K111
B72205S0170K111
B72205S0200K111
B72205S0250K111
B72205S0300K111
B72205S0350K111
B72205S0400K111
B72205S0500K111
B72205S0600K111
B72205S0750K111
B72205S0950K111
B72205S0111K111
B72205S0131K111
B72205S0141K111
B72205S0151K111
B72205S0171K111
B72205S0231K111
B72205S0251K111
B72205S0271K111
B72205S0301K111 Type series SIOV-S05, crimped leads = 5,0
B72205S0110K211
B72205S0140K211
Ordering code
Type series SIOV-S05, crimped leads = 5,0 (continued)
B72205S0111K211
B72205S0131K211
B72205S0141K211
B72205S0151K211
B72205S0171K211
B72205S0231K311
B72205S0251K311
B72205S0271K311
B72205S0301K311
B72205S0381K311
B72205S0421K311
B72205S0441K311
B72205S0461K311
Type series SIOV-S07, straight leads = 5,0
B72207S0110K111
B72207S0140K111
B72207S0170K111
B72207S0200K111
B72207S0250K111
B72207S0300K111
B72207S0350K111
B72207S0400K111
B72207S0500K111
B72207S0600K111
Ordering code
Type series SIOV-S07, crimped leads = 5,0
B72207S0110K211
B72207S0140K211
B72207S0170K211
B72207S0200K211
B72207S0250K211
B72207S0300K211
B72207S0350K211
B72207S0400K211
B72207S0500K211
B72207S0600K211
B72207S0600S212
B72207S0750K211
B72207S0950K211
B72207S0950S212
B72207S0111K211
B72207S0131K211
B72207S0141K211
B72207S0151K211
B72207S0171K211
B72207S0231K311
B72207S0251K311
B72207S0271K311
B72207S0301K311
B72207S0381K311
B72207S0421K311
Ordering code
Type series SIOV-S10, straight leads = 7,5
B72210S0110K151
B72210S0140K151
B72210S0170K151
B72210S0200K151
B72210S0250K151
B72210S0300K151
B72210S0350K151
B72210S0400K151
B72210S0500K151
B72210S0600K151
B72210S0750K151
B72210S0950K151
B72210S0111K151
B72210S0131K151
B72210S0141K151
B72210S0151K151
B72210S0171K151
B72210S0231K151
B72210S0251K151
B72210S0271K151
B72210S0301K151
Ordering code
Type series SIOV-S10, crimped leads = 5,0
B72210S0110K412
Ordering code
Type series SIOV-S10, crimped leads = 5,0 (continued)
B72210S0111K412
B72210S0131K412
B72210S0141K412
B72210S0151K412
B72210S0171K412
B72210S0231K312
B72210S0251K312
B72210S0271K312
B72210S0301K312
Ordering code
Type series SIOV-S10, crimped leads = 7,5
B72210S0110K551
B72210S0140K551
B72210S0170K551
B72210S0200K551
B72210S0250K551
B72210S0300K551
B72210S0350K551
B72210S0400K551
B72210S0500K551
B72210S0600K551
B72210S0750K551
SIOV-S10K320 … 460G.S. upon request
Ordering code
Type series SIOV-S14, straight leads = 7,5
B72214S0110K151
B72214S0140K151
B72214S0170K151
B72214S0200K151
B72214S0250K151
B72214S0300K151
B72214S0350K151
B72214S0400K151
B72214S0500K151
B72214S0600K151
B72214S0750K151
B72214S0950K151
B72214S0111K151
B72214S0131K151
B72214S0141K151
B72214S0151K151
B72214S0171K151
B72214S0231K151
B72214S0251K151
B72214S0271K151
B72214S0301K151 Type series SIOV-S14, crimped leads = 7,5
B72214S0110K551
B72214S0140K551
Taping
Ordering code
Type series SIOV-S14, crimped leads = 7,5 (continued)
B72214S0111K551
B72214S0131K551
B72214S0141K551
B72214S0151K551
B72214S0171K551
B72214S0231K551
B72214S0251K551
B72214S0271K551
B72214S0301K551
taping according
to the versions
of the standard program
These crimp styles provide automatic lock-in function on the printed circuit board, for facilitated as-Crimp style S9 (for lead spacing
Layout recommendation
Recommended PCB thickness: 1,5 + 0,2 mm Example: SIOV-S07K275S9
/Trimmed
Crimp style S11 (for lead spacing = 7,5):
Layout recommendation
Recommended PCB thickness: 1,6 +/
Copper
Recommended hole pattern
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 801709, 81617 München, DEUTSCHLAND
( ++49 89 636 09, FAX (089) 636-2 2689
EPCOS AG 2002. Vervielf?ltigung, Ver?ffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne aus-drückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elek-troindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Lieferm?glichkeiten richten Sie bitte an den Ihnen n?chstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente k?nnen aufgrund technischer Erfordernisse Gefahrstoffe ent-halten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zust?ndige Vertriebsgesellschaft ein-zuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
( ++49 89 636 09, FAX (089) 636-2 2689
EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representa-tives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.