CD214C-T16CA中文资料

Specifications are subject to change without notice.

Customers should verify actual device performance in their specific applications.

smaller electronic components.

Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC)size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown Voltage up to 200 V . Typical fast response times are less than 1.0 ns for unidirectional devices and less than 5.0 ns for bidirectional devices from 0 V to Minimum Breakdown Voltage.

Bourns ?Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away.

Parameter

Symbol

Value

Unit

Minimum Peak Pulse Power Dissipation (T P = 1 ms) (Note 1,2)P PK 1500Watts Peak Forward Surge Current

8.3ms Single Half Sine Wave Superimposed on Rated Load I FSM 200Amps (JEDEC Method) (Note 3)

Steady State Power Dissipation @ T L = 75 °C

P M(AV) 5.0

Watts Maximum Instantaneous Forward Voltage @ I PP = 100 A V F (Note 5)

Volts (For Unidirectional Units Only)Operating Temperature Range T J -55 to +150°C Storage Temperature Range

T STG

-55 to +175

°C

Electrical Characteristics (@ T A = 25 °C Unless Otherwise Noted)How To Order

CD 214C - T 5.0 CA __

Common Code Chip Diode

Package

214A = SMA/DO-214AC 214B = SMB/DO-214AA 214C = SMC/DO-214AB

Model

T = Transient Voltage Suppressor Series Working Peak Reverse Voltage 5.0 =5.0 V RWM (Volts)170 =170 V RWM (Volts)Suffix

A = 5 % Tolerance Device

CA = 5 % Tolerance Bidirectional Device

Terminations

LF = 100 % Sn (lead free)Blank = Sn/Pb

Asia-Pacific:

Tel: +886-2 2562-4117 ? Fax: +886-2 2562-4116Europe:

Tel: +41-41 768 5555 ? Fax: +41-41 768 5510The Americas:

Tel: +1-951 781-5500 ? Fax: +1-951 https://www.wendangku.net/doc/ff4786326.html,

1.Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.

2.Thermal Resistance Junction to Lead.

3.8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).

4.Single Phase, Half Wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20 %.

5. V F = 3.5 V on CD214C-T5.0A through CD214C-T90A and V F = 5.0 V on CD214C-T100A through CD214C-T170A.

*R

o H S C O M P L I A N T V E R S I O N S A V A I L A B L E

*RoHS Directive 2002/95/EC Jan 27 2003 including Annex

CD214C Transient Voltage Suppressor Diode Series

Electrical Characteristics (@T A= 25 °C unless otherwise noted)

Maximum Maximum Maximum Unidirectional Device Bidirectional Device Working Peak Reverse Reverse Reverse

Breakdown Voltage Reverse Leakage Voltage Surge Part Part Part Part V BR(Volts)Voltage@ V RWM@IRSM Current Number Marking Number Marking Min.Max.@ I T(mA)V RWM(Volts)I R(uA)V RSM(Volts)I RSM(Amps) CD214C-T5.0A GDE CD214C-T5.0CA BDE 6.47.2310510009.2163

CD214C-T6.0A GDG CD214C-T6.0CA BDG 6.677.67106100010.3145.6

CD214C-T6.5A GDK CD214C-T6.5CA BDK7.228.310 6.550011.2133.9

CD214C-T7.0A GDM CD214C-T7.0CA BDM7.788.9510720012125

CD214C-T7.5A GDP CD214C-T7.5CA BDP8.339.5817.510012.9116.3

CD214C-T8.0A GDR CD214C-T8.0CA BDR8.8910.2185013.6110.3

CD214C-T8.5A GDT CD214C-T8.5CA BDT9.4410.818.52014.4104.2

CD214C-T9.0A GDV CD214C-T9.0CA BDV1011.5191015.497.4

CD214C-T10A GDX CD214C-T10CA BDX11.112.811051788.2

CD214C-T11A GDZ CD214C-T11CA BDZ12.214.4111518.282.4

CD214C-T12A GEE CD214C-T12CA BEE13.315.3112519.975.3

CD214C-T13A GEG CD214C-T13CA BEG14.416.5113521.569.7

CD214C-T14A GEK CD214C-T14CA BEK15.617.9114523.264.7

CD214C-T15A GEM CD214C-T15CA BEM16.719.2115524.461.5

CD214C-T16A GEP CD214C-T16CA BEP17.820.511652657.7

CD214C-T17A GER CD214C-T17CA BER18.921.7117527.653.3

CD214C-T18A GET CD214C-T18CA BET2023.3118529.251.4

CD214C-T20A GEV CD214C-T20CA BEV22.225.5120532.446.3

CD214C-T22A GEX CD214C-T22CA BEX24.428122535.542.2

CD214C-T24A GEZ CD214C-T24CA BEZ26.730.7124538.938.6

CD214C-T26A GFE CD214C-T26CA BFE28.932.2126542.135.6

CD214C-T28A GFG CD214C-T28CA BFG31.135.8128545.433

CD214C-T30A GFK CD214C-T30CA BFK33.338.3130548.431

CD214C-T33A GFM CD214C-T33CA BFM36.742.2133553.328.1

CD214C-T36A GFP CD214C-T36CA BFP4046136558.125.8

CD214C-T40A GFR CD214C-T40CA BFR44.451.1140564.523.3

CD214C-T43A GFT CD214C-T43CA BFT47.854.9143569.421.6

CD214C-T45A GFV CD214C-T45CA BFV5057.5145572.720.6

CD214C-T48A GFX CD214C-T48CA BFX53.361.3148577.419.4

CD214C-T51A GFZ CD214C-T51CA BFZ56.765.2151582.418.2

CD214C-T54A GGE CD214C-T54CA BGE6069154587.117.2

CD214C-T58A GGG CD214C-T58CA BGG64.474.6158593.616

CD214C-T60A GGK CD214C-T60CA BGK66.776.7160596.815.5

CD214C-T64A GGM CD214C-T64CA BGM71.181.8164510314.6

CD214C-T70A GGP CD214C-T70CA BGP77.889.5170511313.3

CD214C-T75A GGR CD214C-T75CA BGR83.395.8175512112.4

CD214C-T78A GGT CD214C-T78CA BGT86.799.7178512611.4

CD214C-T85A GGV CD214C-T85CA BGV94.4108.2185513710.4

CD214C-T90A GGX CD214C-T90CA BGX100115.5190514610.3

CD214C-T100A GGZ CD214C-T100CA BGZ111128110051629.3

CD214C-T110A GHE CD214C-T110CA BHE122140111051778.4

CD214C-T120A GHG CD214C-T120CA BHG133153112051937.9

CD214C-T130A GHK CD214C-T130CA BHK144165113052097.2

CD214C-T150A GHM CD214C-T150CA BHM16719211505243 6.2

CD214C-T160A GHP CD214C-T160CA BHP17820511605259 5.8

CD214C-T170A GHR CD214C-T170CA BHR189217.511705275 5.5 Notes:

1.Suffix ‘A’ denotes a 5 % tolerance device. 3. For bidirectional devices with a V R of 10 volts or less, the I R limit is double.

2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. 4. For unidirectional devices with a V F max. of

3.5 V at an I F of 35 A, 0.5 Sine Wave

of 8.3 ms Pulse Width.

Specifications are subject to change without notice.

Customers should verify actual device performance in their specific applications.

Specifications are subject to change without notice.

Customers should verify actual device performance in their specific applications.

CD214C Transient Voltage Suppressor Diode Series

Product Dimensions

Recommended Pad Layout

Physical Specifications

Case............................................Molded plastic per UL Class 94V-0Polarity........................Cathode band indicates unidirectional device

No cathode band indicates bidirectional device

Weight ......................................................0.007 ounces / 0.21 grams

Dimension

SMC (DO-214AB)

A

6.60 -

7.11(0.260 - 0.280)B 5.59 - 6.22(0.220 - 0.245)C 2.92 - 3.18(0.115 - 0.125)D 0.15 - 0.31(0.006 - 0.112)E 7.75 -

8.13(0.305 - 0.320)F 0.05 - 0.20(0.002 - 0.008)

G 2.01 - 2.62(0.080 - 0.103)H

0.76 - 1.52(0.030 - 0.060)

Dimension SMC (DO-214AB)

A (Max.)

4.69(0.185)B (Min.) 3.07(0.121)C (Min.)

1.52(0.060)

Specifications are subject to change without notice.

Customers should verify actual device performance in their specific applications.

CD214C Transient Voltage Suppressor Diode Series

Rating and Characteristic Curves

Pulse Waveform Typical Junction Capacitance

Steady State Power Derating Curve

Specifications are subject to change without notice.

Customers should verify actual device performance in their specific applications.

CD214C Transient Voltage Suppressor Diode Series

Packaging Information

Devices are packed in accordance with EIA standard

RS-481-A and specifications shown here.

Item Symbol SMC (DO-214AB)

Carrier Width A 7.22 ±0.10(0.284 - 0.004)Carrier Length B 8.11 ±0.10(0.319 - 0.004)Carrier Depth C 2.36 ±0.10(0.093 - 0.004)Sprocket Hole d 1.55 ±0.05(0.061 - 0.002)

Reel Outside Diameter D 330(12.992)Reel Inner Diameter D 150.0

MIN.

(1.969)Feed Hole Diameter D 213.0 ±0.20(0.512 - 0.008)Sprocket Hole Position E 1.75 ±0.10(0.069 - 0.004))Punch Hole Position F 7.50 ±0.10(0.295 - 0.004)Punch Hole Pitch P 4.00 ±0.10(0.157 - 0.004)Sprocket Hole Pitch P 0 4.00 ±0.10(0.157 - 0.004)Embossment Center P 1 2.00 ±0.10(0.079 - 0.004)Overall Tape Thickness T 0.30 ±0.10(0.012 - 0.004)Tape Width W 16.00 ±0.20(0.630 - 0.008)

Reel Width W 122.4

MAX.

(0.882)

Quantity per Reel

--3,000

REV. 04/06