60
?
NIC COMPONENTS CORP. www .niccomp.c om www https://www.wendangku.net/doc/fb5703236.html, www https://www.wendangku.net/doc/fb5703236.html, www https://www.wendangku.net/doc/fb5703236.html,
Electrolytic Capacitors
NPC Series
CHARACTERISTICS
STANDARD PRODUCTS AND SPECIFICATIONS
? LOW IMPEDANCE & ESR AT HIGH FREQUENCY
? HIGH RIPPLE CURRENT
? REPLACES MULTIPLE TANTALUM CHIPS IN POWER SUPPLIES
? FITS EIA (7343) “D” LAND PATTERNS
? Pb-FREE (GOLD TERMINATION PLATING)
? COMPATIBLE WITH +250°C & +260°C* REFLOW SOLDERING *Refer to product tables for available +260°C values
Rated Working Range 2.0 ~ 8VDC Rated Capacitance Range 10 ~ 390μF Operating Temperature Range
-55 ~ +105°C Capacitance Tolerance ± 20% (M)Max. Leakage Current (μA)After 5 Minutes (+20°C)<0.04CV Max. Tan δ, 120Hz, +20°C D1, D6<0.05D7, D8
<0.1
High Temperature Load Life 2,000 Hours @ 105°C at Rated Working Voltage Capacitance Change
Within ±20% of initial measured value
Tan δ
D7, D8 (D1 10μF/6.3V)Less than 150% of speci?
ed max. value D1, D6Less than 200% of speci? ed max. value
Leakage Current Less than speci? ed max. value
Moisture Resistance*
500 Hours @ +60°C at 90 ~ 95% RH
and No Voltage Applied Capacitance Change
Within -20%/+40% of initial measured value Tan δD7, D8Less than 150% of speci? ed max. value D1, D6Less than 200% of speci? ed max. value
Leakage Current
Less than 300% of speci? ed max. value
Less than 500% of speci? ed max. value for D1 10μF/6.3V
NIC Part Number
(+250°C Re? ow)NIC Part Number (+260°C Re? ow)WV Cap.Max. LC Tan δMax. Ripple Current 100KHz @ +105°C Max. ESR
+20°C & 100KHz (?)Height H ± 0.1
(Vdc)
(μF)(μA)NPC101M2D1ZTRF NPC101M2D1Z A TRF 2
1008.00.053,0000.009 1.4NPC101M2D6XTRF NPC101M2D6X A TRF 1008.00.053,0000.013 1.9NPC101M2D6ZTRF NPC101M2D6Z A TRF
1008.00.053,0000.009 1.9NPC121M2D6ZTRF -1209.60.053,0000.009 1.9NPC151M2D6ZTRF -15012.00.053,0000.009 1.9NPC181M2D6ZTRF -18014.40.053,0000.009 1.9NPC221M2D6ZTRF -22017.60.053,0000.009 1.9NPC221M2D7XTRF NPC221M2D7X A TRF
22017.60.103,5000.010 2.7NPC271M2D8ZTRF -27021.60.103,5000.007 2.9NPC331M2D8ZTRF -33026.40.103,5000.007 2.9NPC391M2D8ZTRF -39031.20.103,5000.007 2.9NPC820M2.5D1ZTRF NPC820M2.5D1Z A TRF 2.5
828.20.053,0000.009 1.4NPC820M2.5D6XTRF NPC820M2.5D6X A TRF 828.20.053,0000.013 1.9NPC820M2.5D6ZTRF NPC820M2.5D6Z A TRF
828.20.053,0000.009 1.9NPC101M2.5D6ZTRF -10010.00.053,0000.009 1.9NPC121M2.5D6ZTRF -12012.00.053,0000.009 1.9NPC151M2.5D6ZTRF -15015.00.053,0000.009 1.9NPC181M2.5D7XTRF NPC181M2.5D7X A TRF
18018.00.103,5000.010 2.7NPC221M2.5D8ZTRF -22022.00.103,5000.007 2.9NPC271M2.5D8ZTRF -27027.00.103,5000.007 2.9NPC331M2.5D8ZTRF -33033.0
0.103,5000.007 2.9NPC680M4D1ZTRF NPC680M4D1Z A TRF 4
6810.90.053,0000.009 1.4NPC680M4D6XTRF NPC680M4D6X A TRF 6810.90.053,0000.013 1.9NPC680M4D6ZTRF NPC680M4D6Z A TRF
6810.90.053,0000.009 1.9NPC820M4D6XTRF -8213.10.053,0000.010 1.9NPC101M4D6XTRF -10016.00.053,0000.010 1.9NPC121M4D6XTRF -12019.20.053,0000.010 1.9NPC151M4D6XTRF -15024.00.053,0000.010 1.9NPC151M4D7XTRF
NPC151M4D7X A TRF
150
24.0
0.10
3,5000.010 2.7
FEATURES
*JEDEC MSL-3
RoHS Compliant includes all homogeneous materials
*See Part Number System for Details
61
RIPPLE CURRENT
Electrolytic Capacitors
NPC Series
μm μm μm
μm μm μm
Anode Polarity Indicator
PART NUMBERING SYSTEM
NPC 101 M 6.3 D7 X A TR F RoHS Compliant
Tape and Reel
A - Denotes +260°C Re? ow Temp. Performance Characteristic (X = std, Z = reduced ESR) Case Size
Working Voltage (Vdc)
Tolerance Code M=20%, K=10% Capacitance Code in μF, ? rst 2 digits are signi? cant, third digits no. of zeros Series
62
Electrolytic Capacitors
NPC Series
NOTES ON REFLOW SOLDERING :1. SAC alloy (+217°C) re? ow soldering compatible
2. Soldering heat limits apply to the top surface of component
3. If you have concerns about your re? ow soldering pro? le
review them with NIC to insure compatible [tpmg@https://www.wendangku.net/doc/fb5703236.html,]
APPLICATION NOTES:
1. NPC Series cannot be used in coupling, time-constant or other circuits that are greatly affected by leakage current.
2. NPC parts are polarized so be sure to verify component orientation when mounting components.
3. Do not apply over voltage exceeding the rated voltage.
4. Do not apply ripple current over the speci? ed maximum ripple current rating.
C O M P O N E N T S U R F A C E T E M P . (o C )
RECOMMENDED REFLOW SOLDERING PROFILE
250150
100
200
260