文档库

最新最全的文档下载
当前位置:文档库 > alteon常用命令

alteon常用命令

修改系统时间

>> Main# /cfg/sys/ time

修改密码

>> Main# /cfg/sys/access/user/admpw

启用和禁用端口

>> Main# /cfg/port 8/dis

>> Main# /cfg/port 8/ena

配置vlan

>> Main# /cfg/l2/vlan 20/name "VLAN 20 upto_3552" >> Main# /cfg/l2/vlan 20/ena

1.将上联端口划分到VLAN上去

>> Main# /cfg/l2/vlan 20/add 16

2.将端口从VLAN配置中去掉

>> Main# /cfg/l2/vlan 20/rem 16

配置vlan IP地址也就是SVI接口IP地址:

1.配置IP地址:

>> Main# /cfg/l3/if 20/addr 59.37.52.3

2.配置掩码:

>> Main# /cfg/ip/if 20/mask 255.255.255.240

3.配置广播地址:

>> Main# /cfg/ip/if 20/broad 59.37.52.15

4.配置VLAN:把这个接口ip和vlan id绑定到一起

>> Main# /cfg/ip/if 20/vlan 20

5.启用接口:

>> Main# /cfg/ip/if 20/ena

配置网关:

Main# /c/l3/gw 1/ena

>> Main# /c/l3/gw 1/addr 59.37.52.1

启用路由转发功能:

缺省情况下,alteon的路由转发功能是启用的,也可以使用下列命令来启用>> Main# /c/l3/frwd/on

配置本地路由转发:

>> Main# /c/l3/frwd/local/add 59.37.52.160 255.255.255.224

>> Main# /c/l3/frwd/local/add 59.37.52.0 255.255.255.240

SLB方面的配置:

1.配置real server:

/c/slb/real 165

ena

rip 59.37.52.165

name "AD-ENGINE-01"

2.配置group :

为了方便标识,将VIP的最后一位作为group和virt的id

/c/slb/group 164

health http --指定以http端口作为健康检测基准

add 165 --增加real server

add 166

3.配置vip:

/c/slb/virt 164

ena

vip 59.37.52.164

/c/slb/virt 164/service http

group 164

dbind ena

维护命令:

察看借口双工之类的状态:

>> Main# /info/link

------------------------------------------------------------------

Port Speed Duplex Flow Ctrl Link

----- ----- -------- --TX-----RX-- ------

1 100 full yes yes up

2 100 full yes yes up

3 100 full yes yes up

察看某个真实server的状态:

>> Server Load Balancing Information# /info/slb/real 172

172: AD-IMAGE-01, 00:15:c5:e5:8d:c5, vlan 32, port 14, health 4, up rport 80, up, current

察看slb内server的状态:

>> Server Load Balancing Information# /info/slb/virt 171

171: 59.37.52.171, 00:00:5e:00:01:ab

virtual ports:

http: rport http, group 171, ad-image-http, backup none, dbind

real servers:

172: AD-IMAGE-01, backup none, 0 ms, group ena, up

173: AD-IMAGE-02, backup none, 1 ms, group ena, up

174: AD-IMAGE-03, backup none, 0 ms, group ena, up

175: AD-IMAGE-04, backup none, 0 ms, group ena, up

176: AD-IMAGE-05, backup none, 0 ms, group ena, FAILED

察看系统日志:

>> Information# /info/log

Aug 13 1:28:48 INFO vrrp: Synchronization connection early RCLOSE in RX. Aug 13 1:28:49 NOTICE slb: real service 59.37.52.173:80 operational

Aug 13 1:28:49 NOTICE slb: Services are available for Virtual Server

171:59.37.52.171

Aug 13 1:28:49 NOTICE vrrp: virtual router 59.37.52.171 is now BACKUP

察看vlan配置:

>> Information# /info/l2/vlan

VLAN Name Status Jumbo BWC Learn Ports ---- -------------------------------- ------ ----- ---- ----- ----------------

1 Default VLAN ena n 256 ena 14 17 18 20 VLAN 20 upto_3550 ena n 256 ena 14 16 3

2 VLAN 32 ads ena n 256 ena 1-15

察看ip地址配置:

>> Information# /info/l3/ip

IP information:

AS number 0

Interface information:

20: 59.37.52.4 255.255.255.240 59.37.52.15 , vlan 20, up 32: 59.37.52.163 255.255.255.224 59.37.52.191 , vlan 32, up

Default gateway information: metric strict

1: 59.37.52.1, vlan any, up

2: 59.37.52.2, vlan any, up

Current IP forwarding settings: ON, dirbr disabled

Current local networks:

Network Address Mask

--------------- ---------------

59.37.52.160 255.255.255.224

59.37.52.0 255.255.255.240

Current IP port settings:

All other ports have forwarding ON

Current network filter settings:

none

Current route map settings:

察看cpu状态:

>> Main# /stats/mp/cpu

------------------------------------------------------------------ CPU utilization:

cpuUtil1Second: 4%

cpuUtil4Seconds: 3%

cpuUtil64Seconds: 2%

察看内存状态:

>> Main# /stats/mp/mem

------------------------------------------------------------------Memory stats:

Total: 130121728 bytes

Used: 86953984 bytes

Free: 43167744 bytes

LowFree: 43167744 bytes 察看接口统计:system inf-statice命令相同:

>> Port 2 Statistics# /stats/port 2/dump

------------------------------------------------------------------Bridging statistics for port 2:

dot1PortInFrames: 0

dot1PortOutFrames: 15649048

dot1PortInDiscards: 4

dot1TpLearnedEntryDiscards: 0

dot1BasePortDelayExceededDiscards: NA dot1BasePortMtuExceededDiscards: NA dot1StpPortForwardTransitions: 4

------------------------------------------------------------------