LCGGF5P00ECU中文资料
Dimensions are shown:Inch (mm)
Snap-acting
Features/Benefits ?Compact design
?Long life and high electrical capacity
?Quick connect, wire lead or PC mounting ?Wide variety of actuator styles
Typical Applications ?Motorized equipment ?Sump pump
?Thermostatic controls
Specifications
CONTACT RATING: From low level* to 10.1 AMPS @ 250 V AC.ELECTRICAL LIFE: 100,000 cycles at 5 AMPS @ 250 V AC.INSULATION RESISTANCE: 1,000 M o h m min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –17oF to 185oF (–25oC to 85oC).OPERATING FORCE: From 142 to 170 grams at actuator button.
Forces are less at free end of lever actuators; (see OPERATING FORCE and ACTUATOR option sections).MOUNTING: 2-56 screws, torque 2.3 in/lbs max.
* Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @20 V AC or DC max.
NOTE: For the latest information regarding RoHS compliance, please go to: https://www.wendangku.net/doc/f59240043.html,/rohs.
NOTE:Specifications and materials listed above are for switches with standard options.For information on specific and custom switches, consult Customer Service center.
Materials
SWITCH HOUSING: Thermoplastic polyester or high temperature
thermoplastic (PTS) (UL 94V-0).
ACTUATOR BUTTON: Thermoplastic polyester (UL 94V-0).SPRING: Copper alloy.PIVOT: Copper alloy.
MOVABLE CONTACTS: Fine silver for ratings greater than 1 AMP
@ 125 V AC. Fine silver with 24K gold plate for 1 AMP @125 V AC or less.
STATIONARY CONTACTS: Fine silver welded on copper alloy for
ratings greater than 1 AMP @ 125 V AC. Gold alloy welded on copper alloy for ratings less than 1 AMP @ 125 V AC.TERMINALS: Copper alloy.TERMINAL SEAL: Epoxy.
Build-A-Switch
T o order , simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages K-18 through K-20. For additional options not shown in catalog, consult Customer Service Center.
Series
LC SP ,Mom.Operating Force GG 5 oz./142 grams GD 3.3 oz./94 grams GH 6 oz./170 grams
Electrical Rating
F5 1 A,125,V AC,30 V DC L9 5 A,1/3 HP ,125,250 V AC M110.1 A,1/3 HP ,125,25O V AC V6 5 A,1/3 HP ,125,250 V AC X1 1 A,125 V AC,3O V DC
Actuator
P00
Pin plunger
A10.28" lever roller,high force A25
.61" lever roller,low force T10.29" lever,high force
T13.22" simulated roller,high force T20.38" lever,low force
T23.32" simulated roller,low force T25.67" lever,low force
Terminations E Solder
H .110" quick connect J Wire lead
L Left formed PC thru-hole R Right formed PC thru-hole S PC Thru-hole Circuitry C SPDT W SPST N.C.Y SPST N.O.
Seal
NONE (STD.) No seal E Epoxy seal
Electrical Life
NONE 6,000 operations
U Extended 100,000 operations Models Available
S n a p -a c t i n
g
LC
SUBMINIATURE PRECISION SNAP-ACTING SWITCHES
SP MOMENTARY
6170
GH
3.394GD 5142
GG BASIC SWITCH OPERATING FORCES
(OZ./GRAMS)
OPTION CODE
NOTE:Operating force varies with actuator option, see ACTUATOR option section.
All models also available.
F5X1L9V6
M1
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications.
Snap-acting
A
B
C
FIG. 7Lever Roller
FIG. 2A
B
C
Lever Roller B
A
FIG. 3Lever
B
A
FIG. 4Lever B
A
FIG. 5
Simulated Roller
B
A
FIG. 6
Simulated Roller
B
A
FIG. 1Pin Plunger
—
.340 ±.185(8,64 ±4,70)
.67(17,0)
4
T25
—.455 ±.125(11,56 ±3,18).32(8,1)6T23—
.340 ±.140(8,64 ±3,56).39(9,9)4T20—.455 ±.065(11,56 ±1,65).22(5,6)5T13—.340 ±.070(8,64 ±1,78).29(7,4)3T10.19 dia.(4,8?).560 ±.175(14,22 ±4,45).61(15,5)2A25.19 dia.(4,8?).560 ±.070(14,22 ±1,78).28(7,1)7A10—.330 ±.015(8,38 ±0,38).30(7,6)1P00DIM. C DIM. B DIM. A FIG.OPTION CODE
HIGH FORCE
LOW FORCE BASIC FORCE .072(1,83)
.372(9,45)
.090(2,29)
.07.03.142
1
4
0.7.050.819
14
24
T25
.049(1,24).252(6,40).062(1,57).10.03.213161.0.52 1.2281534T23.053(1,35).276(7,01).067(1,70).10.03.213160.9.52 1.1261530T20.026(0,66).130(3,30).032(0,81).21.03.4261121.8 1.2 2.2523462T13.029(0,74).140(3,56).035(0,90).21.10.3963111.71 2.1482860T10.010(0,25).030(0,76).004(0,10)1.05 2.02814575 3.3614295170P00.068(1,73).351(8,92).086(2,18).07.04.1621 4.5.70.42.85201224A25.053(1,53).272(6,91).067(1,70).11.05.2131560.9.52 1.1261531A20.037(0,94).180(4,57).044(1,12).16.07.324.5291.3.68 1.6371944A15.029(0,74).140(3,56).034(0,86).21.11.4263121.691 2.0482857A10MINIMUM OVERTRAVEL ALL FORCES
MAXIMUM PRETRAVEL ALL FORCES
MAXIMUM DIFFERENTIAL
TRAVEL ALL FORCES
MINIMUM RELEASE FORCE (OZ./GRAMS)
GG GD GH MAXIMUM OPERATING FORCE (OZ./GRAMS)
GG GD GH OPTION CODE NOTE:For basic switch operating forces, see page K-18.
SWITCH CHARACTERISTICS
S n a p -a c t i n g
Y
SPST N.O. (Single Pole, Single Throw, Normally Open)
W SPST N.C. (Single Pole, Single Throw, Normally Closed)C SPDT (Single Pole, Double Throw)
NONE
6,000 OPERATIONS
U
EXTENDED 100,000 OPERATIONS
E
EPOXY SEAL
NONE
NO SEAL