5mm Pitch Miniature Potting Connector for Secondary Power Supply
DF5 Series
s Features
1. Potting Product
This connector is capable of potting 9mm maximum, and 22.5mm mounting height is a low profile. (Figure 1).
2. Prevent Mis-insertion
When the socket and pin header are mated, this connector is equipped with a mechanism to prevent reverse insertion or dissimilar contact insertion.
3. Means to Prevent Solder Cracks
The pin header employs glass enforced resin, and takes countermeasures to prevent solder cracks due to heat shrinkage.
4. Prevent Reverse Insertion in Printed Board
Boss is added to the pin header, and prevents reverse insertion in the printed board.
5. Full Lock Mechanism
The outer lock system employs full lock mechanism.
6. Current Capacity of 8A
Power can be supplied at 8 A maximum. Specification will change according to applicable cable, number of contacts,number of rows. For further information, refer to product specifications as listed on next page.
s Applications
Business machines, industrial equipment, consumer
appliances (hot water supply, washing machines, refrigerator)
etc.
Figure 1-1
Single row type
Figure 1-2
Double row type
s Product Specifications
10.5
15.520.525.530.535.540.545.5s Single Row Socket
Note: A packaging quantity is delivered by
the bag unit (100 pcs.).
s Single Row Pin Header
Note: A packaging quantity is delivered by
the bag unit (100 pcs.).
Contact Inserted
Contact Inserted
s Double Row Socket
s Double Row Pin Header
E F Note: A packaging quantity is delivered by the
bag unit (100 pcs.).
Note: A packaging quantity is delivered by the
bag unit (100 pcs.).
Contact Inserted
B PCB mounting pattern (Board thickness = 1.6±0.1)
s Socket Crimping Contact
Note 2. If other cables are used instead of the applicable cable, contact the HRS Sales Department.
B Applicable Crimping Tools
B Application Pattern
DF5A-*P-5DSA DF5A-*DP-5DSA
Note 1. For C and G sizes, please refer to pages where individual product patterns are shown.
B Precautions
1. Recommended soldering Flow: 250? for 5 seconds
condition Manual soldering: 290? for 3 seconds
2. Cleaning condition Refer to the "Nylon Connector Use Hand book"
3. Connecting condition Refer to the "Nylon Connector Use Hand book"
4. Cautions s The color phase of this product may be slightly differ from that of the formed product according to the
manufacturing lot, and consequent storage condition, however, the difference affects no performance.