Unix 网卡驱动安装

SCO UNIX下网卡的安装--以神州数码D530为例2008-08-09 17:13转自所下载驱动说明文档，其实比较具通用性。可资借鉴。中英双版。
神州数码DCN-530TX快速以太网卡在SCO OpenServer 5下的安装内容：
-----------
(A)安装过程
(B)参数配置(A)安装过程
=================
注意：请严格参照下列命令和文件名的大小写，因为SCO OpenServer 5对字符大小写敏感。

1.以超级用户身份(root)登录UNIX系统。2.按照下列步骤复制打包文件。
(1)插入驱动程序磁盘。
(2)复制驱动的打包文件到/tmp子目录。
# doscp X:/SCO5/DCN530.IMG /tmp/VOL.000.000
注意：“x:”指磁盘驱动器盘符，例如“A:”或“B:”。3.安装驱动的打包文件。
(1)运行custom。
(2)选择菜单“Software”->“Install New...”。
(3)选择“From ”，应是第一个选项。点击“Continue”。
注意：是SCO OpenServer的主机名。
(4)在“Media Device”下拉菜单中选择“Media Image”，单击“Continue”。
(5)在“Image Directory”框中，输入包含驱动打包文件(VOL.000.000)的路径“/tmp”。
(6)系统将提示“DigitalChina DCN-530TX Device Driver(ver 1.0.0)”，点击“Install”。
(7)当系统提示“installation complete”时，点击“OK”。
(8)“DigitalChina DCN-530TX Device Driver(ver 1.0.0)”将被添加到软件列表中。
(9)退出custom。4.安装网卡
(1)运行“netconfig”。
# netconfig
(2)从菜单中选择“Hardware”->“Add new LAN adapter...”。
(3)系统将自动发现网卡并提示“DigitalChina DCN-530TX Fast Ethernet Adapter Compatible”，点击“Continue”。
(4)从“Add Protocol”对话框中选择需要添加的协议并配置其它的网络参数。请参考SCO OpenServer 5的相关文档。
(5)配置完成后，将显示“Configure networking product”对话框，表示配置成功。点击“OK”。
(6)“DigitalChina DCN-530TX Fast Ethernet Adapter Compatible”将被添加到硬件列表中。
(7)退出“Network Configuration Manager”。
(8)系统提示“Do you want to re-link the kernel now?”时，点击“Yes”。
(9)当系统提示“Do you want this kernel to boot by default? (y/n)”时，输入“y”，并回车。
(10)当系统提示”Do you want the kernel environment rebuilt? (y/n)”时，输入“y”，并回车。
(11)重新连接完成时，按回车键。

5.重新启动计算机以使配置生效。(B)参数配置
=================
1.以超级用户身份(root)登录UNIX系统。

2.运行“netconfig”。
# netconfig3.选中“DigitalChina DCN-530TX Fast Ethernet Adapter”。4.从菜单选择“Hardware”->“modify hardware configuration”。5.选择需要的连接模式，点击“OK”。6.系统提示“Please verify adapter is set to the configuration

just entered”时，点击“OK”。7.“Configure networking product”对话框将显示，标志配置成功。点击“OK”。8.退出“Network Configuration Manager”。9.当系统提示“Do you want to re-link the kernel now?”时，点击“Yes”。10.当系统提示“Do you want this kernel to boot by default? (y/n)”时，输入“y”。11.当系统提示“Do you want the kernel environment rebuilt? (y/n)”时，输入“y”。12.当重新连接完成后，按回车键。13.重新启动计算机以使配置生效。|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DigitalChina DCN-530TX Fast Ethernet Adapter
SCO OpenServer 5 Driver InstallationContents:
---------

(A) Installing the driver on SCO OpenServer 5
(B) Configuring the driver on SCO OpenServer 5(A) Installing the driver on SCO OpenServer 5
================================================================
Notice: Please strictly follow the case of those commands and
files' name, because SCO OpenServer 5 is case-sensitive. 1. Login to UNIX system as supervisor (root).
2. Follow the following steps to copy the package file:
(1)Insert the driver disk.
(2)Copy the driver package file to /tmp directory.

# doscp X:/SCO5/DCN530.IMG /tmp/VOL.000.000 Notice: X: means the floppy drive with driver disk,
such as: A:, or B: etc.
3. Install the driver package.
(1)Run "custom" utility.
(2)Select menu "Software" -> "Install New...".
(3)Select "From ", it should be the first
option. Then click "Continue".

Notice: is the actual host name of your
SCO OpenServer. (4)Select "Media Image" in "Media Device" pull-down menu
and click "Continue".
(5)Enter the path "/tmp" containing the driver package
(VOL.000.000) in the "Image Directory" box.
(6)It will prompt with "DigitalChina DCN-530TX Device
Driver(ver 1.0.0)", click "Install".
(7)When system prompts "installation complete",
click "OK".
(8)"DigitalChina DCN-530TX Device Driver(ver 1.0.0)" will
be added to the software list.
(9)Exit "custom".
4. Install the adapter.
(1)Run "netconfig".

# netconfig

(2)Select from menu "Hardware"->"Add new LAN adapter...".
(3)SCO OpenServer 5 will automatically find the adapter
and prompt "DigitalChina DCN-530TX Fast Ethernet
Adapter Compatible". Click "Continue".
(4)Choose required protocol from the "Add Protocol"
dialog box and continue to set your networking
configuration. Refer to related document in SCO Op

en
Server 5.
(5)After configuration, a "Configure networking product"
dialog box will appear to indicate successful
configuration. Click "OK".
(6)"DigitalChina DCN-530TX Fast Ethernet Adapter
Compatible" will be added to the hardware list.
(7)Exit "Network Configuration Manager".
(8)Click "Yes" when asking "Do you want to re-link the
kernel now?".
(9)Type "y" and press when asking "Do you want
this kernel to boot by default? (y/n)".
(10)Type "y" and Press when asking "Do you want
the kernel environment rebuilt? (y/n)".
(11)Press when re-link is completed.
5. Reboot system to make new configuration effect.(B) Configuring the driver on SCO OpenServer 5
================================================================
1. Login to UNIX system as supervisor (root).
2. Run "netconfig". # netconfig

3. Highlight "DigitalChina DCN-530TX Fast Ethernet Adapter".
4. Choose from menu
"Hardware"->"modify hardware configuration".
5. Choose required Link Mode and click "OK".
6. When asking "Please verify adapter is set to the
configuration just entered", click "OK".
7. After configuration, a "Configure networking product"
dialog box will appear to indicate successful
configuration. Click "OK".
8. Exit "Network Configuration Manager".
9. Click "Yes" when asking "Do you want to re-link the
kernel now?".
10. Type "y" and Press when asking "Do you want this
kernel to boot by default? (y/n)".
11. Type "y" and Press when asking "Do you want the
kernel environment rebuilt? (y/n)".
12. Press when re-link is finished.
13. Reboot system to make new configuration effect.