当前位置：文档库 › 国际会议论文为什么不能用来评职称

国际会议论文为什么不能用来评职称

国际会议论文为什么不能用来评职称？

在参加Metalforming2012 会议时，一位教授向我感叹他们学校在教师考核中的做法--- 会议论文不能够用来进行职称评定了。也许是这个原因，大家参与学术交流也越来越不积极。近来，国内会议办的越来越多，或许会议论文有超过期刊论文的趋势。我的邮箱里面，每年至少能够收到5-8 封关于国际会议的邮件。然而，这些会议中，真正有历史传承的不多。可能是学校人事部分看到部分会议的质量下降，就因此全然否定了全世界所有的“学术会议”，这种做法，无疑是一刀切的，不负责任的，更是不懂学术的。

以AMPT 系列国际会议为例，创始人为Hassim、Travis 等都是国际著名期刊Journal Of Materials Processing Technology 主编、编委，该会议以前的论文都是在该期刊发表。虽然近年JMPT 换了主编，但该会议的影响力已经非常非常大了。Metalforming 系列国际会议也是如此，最开始有伯明翰大学和AGH 科技大学的著名教授合办，该会议的论文以前也是在JMPT 期刊发表。以上两个会议的影响力，应该远远超过国内某些一级期刊在国际上的影响力。当然，时至今日，这两个会议的大部分论文依然发表在国际知名期刊上。

在学校职称评定不认国际会议论文的背景下，很多学校又开始大张旗鼓地鼓励学生在NSC、一区期刊发表学术论文了。对那些能够在这些期刊上发表学术论文的学生进行“重大奖励”。NSC 一篇20 万元，一区期刊一篇5 万元。看了这样的新闻，有时候不知道是笑好，还是哭好。如果是笑，我要说，我也要好好做研究了，争取发表一篇NSC。如果是哭，我要说，我所在的方向，不知道什么时候能够在NSC 上有突破了。特别是如果有一天，学生觉得这几个方向没有机会突破NSC，好学生都不来这个专业了怎么办？

作为学校领导，为了学校发展，是应该指定一些政策对学校的发展进行宏观调控。也只有制定一些政策才能体现出“领导”的作为。当前背景下，国际上的潮流是建设研究型大学。而研究型大学不是嘴上说说就可以实现的，主要表现在该校的研究成果。而研究成果中，对于国内的那些奖项根本就不予以认可。他们看重的是是否有原创性成果发表在那些行业一流期刊上。关于一流期刊的认定，以前澳大利亚有A*、A、B、C 之分，中国科学院也有一个SCI 期刊分区。然而，澳大利亚基金委看到了该分区的缺陷性，因而于前年取消了该分类。的确，在他们的分区中，中国科学属于C，而机械工程学报属于B，很显然不合理。至于中科院分区，我也指出过它的不足，一切只以影响因子数值为依据，不考虑期刊发展历史。如刚刚被SCI 剔除的ASL 期刊就列在该分区的第 3 区中。显然，这种不合符实际情况。也因此，个人感觉这些做法都是杀鸡取卵，为一时利益，放弃学校长远发展。

学校领导这两种政策导向的坏处无疑很大。

（1）如果一个学校的教师通本人系天天论文网就职11年的资深论文编辑；工作中与各大医学期刊杂志社进行学术交流过程中建立了稳定的编辑朋友圈，系多家医学杂志社的特约编辑，常年为医学期刊杂志供稿，负责天天论文网医学论文·分检·编校·推送·指导等工作！工作企鹅1:1550116010工作企鹅2：766085044通不参与一些国际上著名的国际会议，其它学校就不会看到他们活跃在国际学术舞台。试想，长此以往，若干年以后，这些行业里面的人谁还会在乎该学校？参加国际会议，不只是发表学术论文，更重要的参与学术交流，向国际同行表明我们依然在从事这个行业，希望得到大家的认可。我估计，在这种背景下，10 年后，该学校即使发表论文很多，但也会被学术同行淡忘。

（2）如果一个学校只鼓励发表那些“一区”期刊，很显然，该学校的“质”应该会在表面上得到提高。但是，这种“质”是在导致整个学校学科发展不均衡的前提下。如果做材料成型的人全部去研究材料物理、化学，全部争取把论文发表到那些一区期刊，那他们原来的本专业还是该专业吗？在这种背景下，一代人不会影响学校学科的发展，的确，那些教授依然有能力讲授这些专业的课程。但是，两代人以后，他们新留得那些人还有能力讲授那些专业课吗？

学术会议的主要目的是促进学术交流，反映当前国际上大家研究的问题。通过交流，改进自己的研究思路。如果一个学校不鼓励大学教师参与国际交流，这不是走向闭门造车？大学领导可要想想清政府的发展之道！

我的建议是，和学校认定学术期刊一样，每一个专业也认定一些有知名度的会议。同时，也不要一刀子否认新开展的会议，因为这些新会议也都是学科发展的需要。当然，那些只为了挣钱的会议，就另当别论了。

国际会议论文摘要post样版

on Agriculture and Environment 2012 1 Yuji KAMIYA RIKEN Plant Science Center Abstract:The phytohormone auxin plays critical roles in the regulation of plant growth and development. Indole-3-acetic acid (IAA) has been recognized as the major auxin for more than 70 years. Although several pathways have been proposed, how auxin is synthesized in plants is still unclear. Previous genetic and enzymatic studies demonstrated that both TRYPTOPHAN AMINOTRANSFERASE OF ARABIDOPSIS (TAA) and YUCCA (YUC) flavin monooxygenase-like proteins are required for biosynthesis of IAA during plant de- velopment, but these enzymes were placed in two independent pathways. Recently, we demonstrate that the TAA family produces indole-3-pyruvic acid (IPA) and the YUC family functions in the conversion of IPA to IAA in Arabidopsis (Arabidopsis thaliana) by a quantification method of IPA using liquid chromatography–electrospray ionization–tandem MS. We further show that YUC protein expressed in Escherichia coli shows faint yellow color suggesting the presence of FMD and directly converts IPA to IAA. Indole-3-acetaldehyde is probably not a precursor of IAA in the IPA pathway. Our results indicate that YUC proteins catalyze a rate-limiting step of the IPA pathway, which is the main IAA biosynthesis pathway in Arabidopsis. Although 2,4-D and other synthetic auxins were used in agriculture to increase crop production, specific inhibitors and promoters of IAA biosynthesis were not well studied. Our identification of the two specific enzymes for IAA biosynthesis may give us new approach to increase crop production by regulating auxin biosynthesis. Yuji Kamiya is a Group Director of the RIKEN Plant Science Center. He received Degree in agricultural chemistry from the University of Tokyo in 1975. He joined the Pesticide Synthesis Laboratory at RIKEN in 1975. From 1980 to 1982 he studied on gibberellins biosynthesis at the Institute of Plant Physiology, University of G?ttingen, as an Alexander von Humboldt Fellow. Since that time on he has continued to study gibberellins biosynthesis and its regulation. He was appointed as the Head of the Laboratory for Plant Hormone Function of the RIKEN Frontier Research Program from 1991 to 1998. In 2000, he joined the Plant Science Center as the Head of the Laboratory of Cellular Growth Development and in October 2000 he was promoted to the position of Group Director. Main Activities: Research on regulation of plant hormone biosynthesis Cloning and characterization of enzymes involved in hormone biosynthesis Screening of chemical proves to increase plant biomass production.

第十四届世界地震工程国际会议论文集6

STRONG MOTION DISTRIBUTION AND MICROTREMOR OBSERVATION FOLLOWING THE 21 MAY 2003 BOUMERDES, ALGERIA EARTHQUAKE A. Meslem1, F. Yamazaki1, Y. Maruyama1, D. Benouar2, N. Laouami3 1 Department of Urban Environment Systems, Graduate School of Engineering, Chiba University, Japan 2 Faculty of Civil Engineering, University of Bab-Ezzouar, Algiers, Algeria 3CGS, National Center of Applied Research in Earthquake Engineering, Algiers, Algeria Email: meslem@graduate.chiba-u.jp ABSTRACT: Detailed analysis was conducted for the recorded mainshock across the country during the 21 May 2003 Boumerdes, Algeria earthquake. A remarkable difference has been recorded between neighbour stations. Since local site conditions have a significant effect on the ground motions, and hence on the damage distribution caused by the earthquake, microtremor survey was conducted at several sites of seismic observation stations. In this study, a particular attention is paid to 4 seismic network stations located in the most affected area between Algiers and Boumerdes provinces. Using the microtremor records and the strong motion records from five stations, the effect of soil condition on seismic motion is investigated and the damage distribution caused by this event is explained. The results from this study show that in some stations, the recorded high PGA values were influenced by high-frequency contents. However, in other stations, soil amplification is considered to be responsible for high PGV v alues. Hence, in order to conduct a further engineering and seismological study, it is highly recommended to conduct an investigation to identify the local soil profile at the seismic stations. KEYWORDS: the 2003 Boumerdes earthquake, ground motion, microtremor, damage distribution 1. INTRODUCTION On May 21, 2003, a destructive Mw=6.8 earthquake hit the northern part of Algeria, causing a huge structural and non-structural damages and human casualties. The last report by the Algerian ministers’ council (December 12, 2003) deplores that 2,278 deaths and 11,450 injured were claimed by the earthquake. The number of homeless was counted as 250,000, corresponding to 40,000 families. As for the building damage, 17,000 units were demolished and 116,000 were repaired. The resulted direct economic loss was estimated to be 5 billion US dollars (Ousalem and Bechtoula, 2005). The earthquake was felt inside a 250 km radius zone from the epicenter (Laouami et al., 2006) and provoked the occurrence of liquefaction in the epicentral area. An uplift of coastal line was marked with the average of 0.55m (Harbi et al., 2007; Bouhadad et al., 2004; Meghraoui et al., 2004). In the European side of Mediterranean Sea, tsunamis of about 1.5m high were recorded along the coast of Spain (Alasset et al., 2006). Soon after the event, several international organizations located the 21 May 2003 Boumerdes earthquake. The location given by the Algerian Research Center of Astronomy Astrophysics and Geophysics (CRAAG) was 36.91N, 3.58E. However, the mainshock was relocated at 36.83N, 3.65E with the focal depth of 10 km (Bounif et al., 2004). The acceleration records of the mainshock were recorded by a number of accelerographs, deployed by the Algerian National Research Center of Earthquake Engineering (CGS). However, several technical problems have occurred during recording the mainshock. The number of free field seismic stations which recorded the mainshock, especially in the severely affected areas, is not sufficient for estimating a detailed strong motion

国际会议论文格式要求

国际会议论文格式要求： Author Guidelines for 8.5 x 11-inch Proceedings Manuscripts Author(s) Name(s) Author Affiliation(s) E-mail Abstract The abstract is to be in fully-justified italicized text, at the top of the left-hand column as it is here, below the auth or information. Use the word “Abstract” as the title, in 12-point Times, boldface type, centered relative to the column, initially capitalized. The abstract is to be in 10-point, single-spaced type, and up to 150 words in length. Leave two blank lines after the abstract, then begin the main text. 1. Introduction All manuscripts must be in English. These guidelines include complete descriptions of the fonts, spacing, and related information for producing your proceedings manuscripts. Please follow them and if you have any questions, direct them to the production editor in charge of your proceedings at the IEEE Computer Society Press: Phone (714) 821-8380 or Fax (714) 761-1784. 2. Formatting your paper All printed material, including text, illustrations, and charts, must be kept within a print area of 6-1/2 inches (16.51 cm) wide by 8-7/8 inches (22.51 cm) high. Do not write or print anything outside the print area. All text must be in a two-column format. Columns are to be 3-1/16 inches (7.85 cm) wide, with a 3/8 inch (0.81 cm) space between them. Text must be fully justified. A format sheet with the margins and placement guides is available as both Word and PDF files as and . It contains lines and boxes showing the margins and print areas. If you hold it and your printed page up to the light, you can easily check your margins to see if your print area fits within the space allowed. 3. Main title The main title (on the first page) should begin 1-3/8 inches (3.49 cm) from the top edge of the page, centered, and in Times 14-point, boldface type. Capitalize the first letter of nouns, pronouns, verbs, adjectives, and adverbs; do not capitalize articles, coordinate conjunctions, or prepositions (unless the title begins with such a word). Leave two 12-point blank lines after the title. 4. Author name(s) and affiliation(s) Author names and affiliations are to be centered beneath the title and printed in Times 12-point, non-boldface type. Multiple authors may be shown in a two- or three-column format, with their affiliations italicized and centered below their respective names. Include e-mail addresses if possible. Author information should be followed by two 12-point blank lines. 5. Second and following pages The second and following pages should begin 1.0 inch (2.54 cm) from the top edge. On all pages, the bottom margin should be 1-1/8 inches (2.86 cm) from the bottom edge of the page for 8.5 x 11-inch paper; for A4 paper, approximately 1-5/8 inches (4.13 cm) from the bottom edge of the page. 6. Type-style and fonts Wherever Times is specified, Times Roman or Times New Roman may be used. If neither is available on your word processor, please use the font closest in

(EI会议,EI国际会议)所有学术论文权威性等级详解(超详细!经典!)

一提到发表学术论文，您脑中一定冒出许多期刊名称的概念，但是期刊也有级别之分，所以文章的档次也有三六九等。那么如何在浩如烟海的众多论文中合理为每篇论文划分等级，则成为一个非常重要的事情。举个例子，请回答以下几个问题。 1 EI会议论文和国内中文核心论文，哪个更加权威？ 2 国内中文核心论文和南大核心论文，哪个更加权威？ 3 只要是SCI论文，其文章质量一定比EI高吗？如果你不懂文章的等级划分，那么以上问题也许回答比较困难，下面就一一为您剖析。首先谈谈SCI级别的论文，当然SCI在全球范围内属于最权威的论文，尤其是国际上比较出名的《自然》和《科学》杂志，上面的论文很多都具备获取罗贝尔奖的资格，并且这类论文审稿周期很长，专家审查很严格，对英文要求也比较高，所以可想而知，这类论文等级是最高的。其次谈谈EI级别论文，EI也被称为全球核心，听名字貌似很高大上，但是要注意，EI有两种论文，一种是期刊论文（即JA），即EI源刊，一种是会议论文（即CA），也是我们经常说的EI会议论文。这两种论文级别可不是一样的，EI的JA级别要比CA高。同时还要注意，EI源刊有国内的，也有国外的，也有国内EI会议，国际EI会议之分，一般国内排在前面的EI源刊论文其级别完全不亚于SCI级别论文，这一点很重要。再次谈谈国内的中文核心和南大核心，首先中文核心=北大核心，在国内目前算是最权威的学术论文，但是这并不是说南大核心就比中文核心第一个档次，其实这两者无法单一横向比较，因为中文核心大多收录自然科学类的论文，南大核心主要收录社会科学类论文，所以硬要比较这两者的话，只能说两者等级差不多。还有说明一点，一般中文核心还是比那种比较水的EI会议等级要高的。再谈谈国内的其它核心，如科技核心，这类文章质量一般，有些也是很水的，但是科技核心比普刊等级要高，因为比较科技核心也算是“核心” 最后谈谈中文核心和南大核心的增刊，可以这么说，如果是增刊，那么基本上文章档次很低了，和普刊差不多，大多数增刊都是给钱就发的类型。所以综上分析得出权威性结论：顶级SCI源刊>中等SCI源刊>国内顶级EI源刊>低等SCI源刊>国内外一般EI源刊>国内顶级中文核心或者南大核心>一般EI会议>国内一般中文核心和南大核心>科技核心和一般行业核心>普刊和增刊当然以上不等式只是定性将权威性划分了下，因为每个级别的文章本身行业内又会有顶级、一般和垃圾三个级别（根据影响因子不同而划分），所以都不能够太绝对化。如果搞不清楚可以进这里问问：https://www.wendangku.net/doc/4f2933090.html,（复制访问），里面专做EI会议的，可以从EI会议作为分界点，横向比较其它论文等级与该分界点权威差值，从而判断两个论文的等级差别。希望这篇文章能够帮助到各位从事学术行业的朋友们！

关于国际会议论文精选3篇

关于国际会议论文精选3篇大家上午好!今天我汇报的主题是：基于改进型LBP算法的运动目标检测系统。运动目标检测技术能降低视频监控的人力成本，提高监控效率，同时也是运动目标提取、跟踪及识别算法的基础。图像信号具有数据量大，实时性要求高等特征。随着算法的复杂度和图像清晰度的提高，需要的处理速度也越来越高。幸运的是，图像处理的固有特性是并行的，尤其是低层和中间层算法。这一特性使这些算法，比较容易在FPGA等并行运算器件上实现，今天汇报的主题就是关于改进型LBP算法在硬件上的实现。 good morning everyone. My report is about a Motion Detection System Based on Improved LBP Operator. Automatic motion detection can reduce the human cost of video surveillance and improve efficiency [?'f??(?)ns?]，it is also the fundament of object extraction, tracking and recognition [rek?g'n??(?)n]. In this work, efforts ['ef?ts] were made to establish the background model which is resistance to the variation of illumination. And our video surveillance system was realized on a FPGA based platform. PPT(2) 目前，常用的运动目标检测算法有背景差分法、帧间差分法等。帧间差分法的基本原理是将相邻两帧图像的对应像素点的灰度值进

如何判断国际会议论文是否被EI收录

★如何判断国际会议论文是否被EI收录？如何判断国际会议论文是否被EI收录？可能会遇到这样的情况，有些国际会议说明了EI收录，可到最后却并未收录，让人郁闷至极。那么如何判断一个国际会议是否会被EI收录呢？除了看这个会议以往的被收录情况外，还有以下几个小经验：一、看会议论文的出版单位会议EI收录其实与主办方关系很小，甚至没有任何关系，第一要素主要取决于会议论文的出版单位，根据多年经验，特列举全球著名出版单位如下： 1.德国斯普林格出版社（SPRINGER）：100%EI收录； 2.美国机械工程学会出版社（ASME）：100%EI收录； 3.美国土木工程学会出版社（ASCE）：100%EI收录； 4.美国电子电气工程计算机学会出版社（IEEE CS）：99%EI收录； 5.美国电子电气工程出版社（IEEE）：90%EI收录； 6.英国工程技术出版社（IET）：90%EI收录； 7.法国Atlantis Press：70%。二、考察会议主席的诚信度 1.国际一级学会发起：如IFAC、IEEE等。如果IEEE发起的会议IEEE要占51%的注册费，因此，该类会议注册费均在500美元以上。请注意中国2007年只有一个是IEEE发起的，即ICMA2007，其他均不是，2008年至今中国没有一个会议是IEEE发起； 2.国家一级学会发起：如中国计算机学会、中国自动化学会、中国通讯学会等，如WCICA、CCC等； 3.各大学校级领导：中国大学校级领导作为主席办国际会议具有中国特色（如ICTE等）； 4.国际一级学会技术支持：如IEEE CS、IEEE、IET、ASME、ASCE等。如ICIC、ICNC； 5.其他学者。

国际会议论文排版及格式要求

国际会议论文排版及格式要求论文构成及顺序： Title（题目）→Authors（作者）→Affiliations（单位）→Abstract（摘要）→Keywords（关键词）→Text（正文）→Acknowledgements（致谢）→References（参考文献）页面设置：纸型A4；方向纵向；页边距：上2厘米，下2厘米，左2厘米，右2厘米，页眉1.5厘米，页脚1.5厘米文档网格：选中“只指定行网格”，每页46行，跨度15.6磅，栏数：1，应用于：整篇文档整篇文档段落设置：间距：段前0行，段后0行行距：单倍选中“如果定义了文档网格，则自动调整右缩进”和“如果定义了文档网格，则与网格对齐” 作者单位与摘要间空一行；关键词与正文间空一行；图、表上下各空一行；Acknowledgements上空一行；References上空一行字符间距设置：缩放：100％间距：标准位置：标准选中“调整字体的字间距”：1 选中“如果定义了文档网格，则对齐网格” 字体和字号：题目：Times New Roman，四号，居中，加粗，所有实词首字母大写作者：Times New Roman，五号，居中，姓所有字母大写，名首字母大写作者单位：Times New Roman，小五号，不同单位间用分号分隔，居中，要标明二级单位（大学：院系；研究院所：处、室等），居中，多单位在作者右上角标阿拉伯数字区分摘要和关键词：Times New Roman，六号；关键词间用分号分隔；关键词首字母小写，关键词3~8个一级标题：五号，Times New Roman字体，加粗，所有实词首字母大写；靠左顶格二级标题：小五号，Times New Roman字体，加粗，所有实词首字母大写；靠左顶格三级标题：小五号，Times New Roman字体，第一个词首字母大写；靠左顶格正文部分：小五号，Times New Roman字体；希腊字母用Symbol字体图题、表题：小五号，加粗，Times New Roman字体；第一个词首字母大写；图序、表序用Fig.1、Table 1 图、表中文字用小五号Times New Roman字体，量与单位之间用“/”间隔图注与说明、表注与说明：小五号Times New Roman字体参考文献著录：Times New Roman字体，六号（其中References用小五号）页码：小五号，Times New Roman字体图格式： 1）图序与图题间空2格，其间不用任何点号。2）图序和图题排在图的下方，整幅图左右居中，其总体长度不超过图面的宽度；否则图题应转行排。3）几幅图形共用一个图序和图题，每幅图应有子图序，如(a)，(b)，(c)等，有时可能会有子图题。子图序和子图题置于横标目的下方，相对于横坐标轴整个居中排；有时可置于图面内空白较大的地方，每个子图序和子图题在各个图面中的位置应一致。4）标目中，量符号与单位符号间用斜分数线（/）相隔。标目中的量符号与正文中的一致。5）图注与说明安排在图题的上方。6）先见文字叙述，后见图。7）图不要与文字混排，图单独通栏排。表格式： 1）采用三线表。2）表序与表题之间空2格，其间不用任何点号。3）表身内无数字的栏内，应区别情况对待。“空白”代表未测或无此项，“—”（一字线）或“…”代表未发现，“0”代表实测结果为零。4）先见文字叙述，后见表格。5）表不要与文字混排，单独通栏排。方程式、表达式编号：文中所列方程式、表达式必须按顺序编号（如：(1)），编号位置靠右顶格。方程式、表达式居中排。所有物理量的符号必须用斜体；单位必须用国际单位制（SI），必须使用正体。其他说明：

国际会议论文投稿要求及格式

Your Paper's Title Starts Here: Please Center use Helvetica (Arial) 14 FULL First Author1, a *, FULL Second Author2,b and FULL Last Author3,c 1Full address of first author, including country 2Full address of second author, including country 3List all distinct addresses in the same way a email, b email, c email * please mark the corresponding author with an asterisk Keywords:List the keywords covered in your paper. These keywords will also be used by the publisher to produce a keyword index. For the rest of the paper, please use Times Roman (Times New Roman) 12 Abstract.This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text. Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8 x 11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in). We shall be able to publish your paper in electronic form on our web page https://www.wendangku.net/doc/4f2933090.html,, if the paper format and the margins are correct. Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind when designing your figures and tables etc. Introduction All manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper. Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. Should authors use tables or figures from other Publications, they must ask the corresponding publishers to grant them the right to publish this material in their paper. Use italic for emphasizing a word or phrase. Do not use boldface typing or capital letters except for section headings (cf. remarks on section headings, below). Organization of the Text Section Headings. The section headings are in boldface capital and lowercase letters. Second level headings are typed as part of the succeeding paragraph (like the subsection heading of this paragraph). Page Numbers. Do not number your paper: Tables. Tables (refer with: Table 1, Table 2, ...) should be presented as part of the text, but in such a way as to avoid confusion with the text. A descriptive title should be placed above each table. Units in tables should be given in square brackets [meV]. If square brackets are not available, use curly {meV} or standard brackets (meV). Special Signs. for example , αγμΩ () ≥ ± ● Γ {1120}should always be written in with the fonts Times New Roman or Arial, especially also in the figures and tables. Macros. Do not use any macros for the figures and tables. (We will not be able to convert such papers into our system) Language. All text, figures and tables must be in English.

研究生科研技巧---如何查找国内会议论文全文

第6章会议 §6.1 如何查找国内会议论文全文目前用户可免费检索的数据库有：国家科技图书文献中心（NSTL）网站上提供了其下属8家成员馆馆藏中文会议论文的题录文摘，用户可通过NSTL或CSDL原文传递系统获取原文。 https://www.wendangku.net/doc/4f2933090.html,/index.html 学校图书馆提供查找并下载会议论文全文的主要有中国期刊网和万方数据库。§6.2 如何查找国外会议论文全文（1）学校图书馆的ISI Proceedings： https://www.wendangku.net/doc/4f2933090.html,/portal.cgi/portal.cgi/?SID=F2O4nkOn4Pe AGC1fAma 它是检索国际著名会议、座谈会、研讨会及其它各种会议录论文的的综合性多学科的权威数据库，该库收录了全球12000余种主要的科学技术、社会科学和人文科学会议录的论文文摘。（2）学校图书馆的IEEE Conference Proceedings： https://www.wendangku.net/doc/4f2933090.html,/xpl/conferences.jsp （3）国家科技图书文献中心（NSTL）网站： https://www.wendangku.net/doc/4f2933090.html,/index.html 网站免费提供了其8家成员馆馆藏外文会议论文的题录文摘（4）学协会出版的数据库中或一些学科领域的专门数据库中也收录了会议论文，如：（a）AIP Conference Proceedings（美国物理联合会会议录网络版），收录了美国物理联合会（AIP）自2000年以来出版的约500多种会议录（全文）。 https://www.wendangku.net/doc/4f2933090.html,/ （b）INSPEC（英国科学文摘），由英国电气工程师学会（IEE）出版的文摘数据库，是物理学、电子工程、电子学、计算机科学及信息技术领域的1500余种会议记录。https://www.wendangku.net/doc/4f2933090.html,/portal.cgi （c）BIOSIS Previews（生物学文摘数据库），收录了与生命科学研究相关的各个领域5 000余种期刊文摘，1500多种会议录等非刊文献。 http://202.127.20.67/cgi-bin/ovidweb/ovidweb.cgi §6.3 如何查找国内外将要召开的会议