建筑学专业绿色建筑毕业论文外文文献翻译及原文

毕业设计（论文）外文文献翻译

文献、资料中文题目：绿色建筑

文献、资料英文题目：

文献、资料来源：

文献、资料发表（出版）日期：

院（部）：

专业：建筑学

班级：

姓名：

学号：

指导教师：

翻译日期： 2017.02.14

原文：

DOCTORAL FORUM

NA TIONAL JOURNAL FOR PUBLISHING AND MENTORING DOCTORAL STUDENT RESEARCH

VOLUME 7, NUMBER 1, 2010

Green buildings

Priscilla D. Johnson

PhD Student in Educational Leadership

Whitlowe R. Green College of Education

Prairie View A&M University

Prairie View, Texas

William Allan Kritsonis, PhD

Professor and Faculty Mentor

PhD Program in Educational Leadership

Whitlowe R. Green College of Education

Prairie View A&M University

Member of the Texas A&M University System

Prairie View, Texas

Hall of Honor (2008)

William H. Parker Leadership Academy, Graduate School

Prairie View A&M University

Member of the Texas A&M University System

Prairie View, Texas

Visiting Lecturer (2005)

Oxford Round Table

University of Oxford

Oxford, England

Distinguished Alumnus (2004)

College of Education and Professional Studies

Central Washington University

Ellensberg, Washington

Abstract: Green building refers to do its best to maximize conservation of resources (energy, land, water, and wood)，protecting the environment and reduce pollution in its life cycle. Provide people with healthy, appropriate and efficient use of space, and nature in harmony symbiosis buildings. I described more details of green building design’notion, green building’design, as well as the significance of the concept of green building and improve the effectiveness analysis of the external effects of green building measures,

Key words: green buildings; protect the ecology; signification ; analysing the effects

1 What is a green building

Green building refers to building life cycle, the maximum conservation of resources (energy, land, water and materials), protecting the environment and reduce pollution, provide people with health, application and efficient use of space, and nature harmony of the building. The so-called green building "green" does not mean a general sense of three-dimensional green, roof garden, but represents a concept or symbol, refers to building environmentally friendly, make full use of natural resources, environment and basic ecological damage to the environment without balance of a building under construction, but also known as sustainable building, eco-building, back into the wild construction, energy saving construction.

Green building interior layout is very reasonable, to minimize the use of synthetic materials, full use of the sun, saving energy for the residents Chuangzao almost-natural feeling.

People, architecture and the natural environment for the harmonious development goals, in the use of natural and artificial means to create good conditions and healthy living environment, as much as possible to control and reduce the use and destruction of the natural environment, to fully reflect the nature obtain and return balance.

2, the meaning of green building

The basic connotation of green building can be summarized as: to reduce the load on the environment architecture, which save energy and resources; provide a safe, healthy, comfortable living space with good; affinity with the natural environment, so that people and building a harmonious coexistence with the environment and sustainable development.

3 Development of the significance of green building rating system

Establish green building rating system is a revolution in the field of architecture and the Enlightenment, its far more than energy savings. It is innovative in many ways and organic synthesis, thereby building in harmony with nature, full utilization of resources and energy, create healthy, comfortable and beautiful living space. It's revolutionary for the field of architecture from the technical, social and economic angles.

3.1 Technical Significance

Green building study of early technical problems of individual-based, technology is isolated and one-sided, not formed an organic whole, the integration of design and economic study of consciousness is far from the only strategy of economic analysis phase of the subsidiary's knowledge . However, individual technical research results of early modern green building techniques for the multi-dimensional development and systems integration will lay a solid foundation. Since the nineties of the 20th century, with the understanding of green building gradually deepen and mature, people give up way too utopian thinking He alone environmental consciousness and moral constraints and spontaneous green behavior, turned to explore more workable environmental philosophy, environmental and capital combined into the future world the new direction of development of environmental protection, green building has entered a result of ecological ethics from the practice of promoting ecological research to deepen the new stage. Green Building Technology takes on the natural sciences, social sciences, humanities, computer science, information science and other subjects the trend of integration of research results, making green building design into the multi-dimensional stage of development strategy study. The deepening of green building technology strategy and

development in materials, equipment, morphology, etc various advanced fields, in technology development, technology and other design elements of the integration is also starting from the past the simple addition, more attention to the periphery of the retaining structure itself design technology and architecture to combine the overall system change, gradually becoming green building systems. Green building rating system was established green building technologies gradually improve and systematize the inevitable result, it is the organic integration of green building technology, a platform built to green building technology, information technology, computer technology and many other subjects can be a unified platform in their respective roles, the establishment of a comprehensive evaluation system for designers, planners, engineers and managers a more than ever, a more simple, Guizhangmingque green building assessment tools and design guidelines.

3.2 The social significance.

Green building rating system reflects the social significance of the main advocates of the new way of life, heightened awareness and public participation in the continuation of local culture are two aspects.

To promote a healthy lifestyle. Green building rating system, the social significance of the primary advocate a healthy lifestyle, which is based on the design and construction of green buildings as a community education process. The principles of green building rating system is the effective use of resources and ecological rules to follow, based on the health of building space to create and maintain sustainable development. The concept of the past to correct people's misconceptions about consumer lifestyles, that can not blindly pursue material luxury, but should keep the environment under the premise of sustainable use of modest comfort to pursue life. From the fundamental terms, construction is to meet human needs built up of material goods as people's Wenhuayishi Name and lifestyle is not sustainable when, the value of green building itself will be reduced, but only had a real social need When the requirements of sustainable development and way of life that matches the green building to achieve the best results.

Enhanced awareness of public participation. Green Building Rating system is not a monopoly for the design staff of professional tools, but for planners, designers, engineers, managers, developers, property owners, jointly owned by the public and other assessment tools. It broke the previous professional development of the monopoly to encourage the participation of the public and other public officers. Through public participation, the introduction of architects and other building users, the construction of dialogue participants, making the original design process dominated by the architect becomes more open. Proved the involvement of various views and a good help to create a dynamic culture, embody social justice community.

3.3 The economic significance.

Green building rating system, the economic significance can be divided into macro and micro levels. At the macro level, the green building rating system from the system life-cycle perspective, the green building design integrated into the economic issues involved in the production from the building materials, design, construction, operation, resource use, waste disposal, recycling of demolition until the natural resources the whole process. Economic considerations of green building is no longer limited to the design process itself, while the

policy extended to the design of the narrow role to play to support the policy level, including the establishment of "green labeling" system, improving the construction environmental audit and management system, increase and construction-related energy consumption, pollutant emissions and other acts of tax efforts, improve the legal system of environmental protection, from the increase in government construction projects on the sustainability of economic support and raise the cost to the construction of polluting the environment acts as the costs for green buildings design and construction to create a favorable external environment. This goal is not entirely the responsibility of government agencies, as the architects involved in design work as a sound system of responsibility for recommendations obligations, because only the most from the practice of the need is real and urgent. The related policy issues in green building design strategies, building a system to solve the economic problems facing the important aspects. At the micro level, the current from the economic point of Design Strategy is more fully consider the economic operation of the project, and specific technical strategies accordingly adjusted.

3.4 Ethical Significance.

Green building rating system, the theoretical basis of the concept of sustainable development, therefore, whether the evaluation system of each country how much difference in structure, they all have one thing in common: reduce the burden of ecological environment, improve construction quality of the environment for future generations to remain the development of there is room. This radically change the long-sought human blindly to the natural attitude, reflecting people's understanding of the relationship between man and nature by the opposition to the uniform change. According to the current global energy reserves and resources distribution, the Earth's natural environment is also far from the edge of exhaustion, enough people enjoy the luxury of contemporary material life. But now we have to consume a resource, it means that future generations will be less of a living space. More importantly, if we consume the natural environment more than it can limit self-renewal, then the future of the younger generation is facing the planet's ecosystems can not recover the risk into a real crisis. Therefore we can say, the development of green buildings and their corresponding evaluation system, for more contemporary people is the responsibility and obligations. For more the interests of future generations and advantages. 4 green building design

Green building design include the following:

Saving energy: full use of solar energy, using energy-efficient building envelope and heating and air conditioning, reducing heating and air conditioning use. Set according to the principle of natural ventilation cooling system that allows efficient use of building to the dominant wind direction in summer. Adapted to local climatic conditions, building use form and general layout of the plane.

Resource conservation: in the building design, construction and selection of construction materials, are considered fair use and disposal of resources. To reduce the use of resources, strive to make the use of renewable resources. Conserve water resources, including water conservation and greening.

Return to Nature: Green Building exterior to emphasize integration with the surrounding environment, harmony, movement complement each other so that the protection of natural ecological environment.

5 Effect of green building

5.1 Effect of the composition of green building

Effect of green building, including internal effects and external effects, direct benefits and direct costs as the internal effect, known as the indirect benefits and indirect costs of external effects, according to engineering economics point of view: the internal effects can be financial evaluation, external effects should be economic evaluation, economic evaluation is based on the so-called rational allocation of scarce resources and socio-economic principles of sustainable development, from the perspective of the overall national economy, study projects spending of social resources and contributions to the community to evaluate the project's economic and reasonable and external effects generally include Industry Effects, environmental and ecological effects, technology diffusion effect, the external effect will cause the private costs (internal costs or indirect costs) and social costs inconsistent, leading to the actual price is different from the best price. From the perspective of sustainable development, green building assessment effects of the main indicators of external effects.

Since beginning the development of green building, unity of quantitative indicators system is still not established, I believe that the following aspects should be analyzed: (1) strictly control the construction industry, size, limit the number of employees. Extensive growth model epitomized by the struggle over the construction project, the construction process using human wave tactics, once the state limit the scale of construction, will form the "adequate", which will not reduce the degree of mechanization, labor, the low level. (2) more investments in technology, upgrade technology, establish and perfect the mechanism for scientific and technical equipment. Focus on the development and application of building technology, combined with the project, the characteristics of future construction, a planned way scientific and technological research and development of new machinery, new processes, new materials, and actively introduce, absorb and assimilate the advanced scientific and technological achievements of science and technology to improve the level of mechanization.

(3) in urban planning, survey and design through the "green building" ideas. Family housing and urban construction or alteration must remain in the room, from lighting, ventilation, drainage and so control the damage to the environment. (4) construction work, reduced resource consumption, the production process in construction, energy saving measures should be adopted to prevent the excessive consumption of land resources, water resources, power resources.

5.2 External effects of the challenges to building the economy

Under the control of the government's intervention, to a certain extent on the efficient allocation of resources to strengthen the implementation of energy conservation mandatory standards for construction supervision. To further improve the building energy monitoring system, and strengthen the mandatory building energy efficiency standards in order to carry out the implementation of the project as the main content of the whole process of monitoring, particularly for large public buildings to enhance the building energy regulation, reflected in the project cost on the part of the Waibu costs into internal costs, making the "non-green building" project's internal costs, internal efficiency and reduce the external costs of green building, the external efficiency increase, so that effective economic resources to the rational flow of green

建筑类外文文献及中文翻译

forced concrete structure reinforced with an overviewRein Since the reform and opening up, with the national economy's rapid and sustained development of a reinforced concrete structure built, reinforced with the development of technology has been great. Therefore, to promote the use of advanced technology reinforced connecting to improve project quality and speed up the pace of construction, improve labor productivity, reduce costs, and is of great significance. Reinforced steel bars connecting technologies can be divided into two broad categories linking welding machinery and steel. There are six types of welding steel welding methods, and some apply to the prefabricated plant, and some apply to the construction site, some of both apply. There are three types of machinery commonly used reinforcement linking method primarily applicable to the construction site. Ways has its own characteristics and different application, and in the continuous development and improvement. In actual production, should be based on specific conditions of work, working environment and technical requirements, the choice of suitable methods to achieve the best overall efficiency. 1、steel mechanical link 1.1 radial squeeze link Will be a steel sleeve in two sets to the highly-reinforced Department with superhigh pressure hydraulic equipment (squeeze tongs) along steel sleeve radial squeeze steel casing, in squeezing out tongs squeeze pressure role of a steel sleeve plasticity deformation closely integrated with reinforced through reinforced steel sleeve and Wang Liang's Position will be two solid steel bars linked Characteristic: Connect intensity to be high, performance reliable, can bear high stress draw and pigeonhole the load and tired load repeatedly.

英文文献及翻译(计算机专业)

NET-BASED TASK MANAGEMENT SYSTEM Hector Garcia-Molina, Jeffrey D. Ullman, Jennifer Wisdom ABSTRACT In net-based collaborative design environment, design resources become more and more varied and complex. Besides com mon in formatio n man ageme nt systems, desig n resources can be orga ni zed in connection with desig n activities. A set of activities and resources linked by logic relations can form a task. A task has at least one objective and can be broken down into smaller ones. So a design project can be separated in to many subtasks formi ng a hierarchical structure. Task Management System (TMS) is designed to break down these tasks and assig n certa in resources to its task no des. As a result of decompositi on. al1 desig n resources and activities could be man aged via this system. KEY WORDS : Collaborative Design, Task Management System (TMS), Task Decompositi on, In formati on Man ageme nt System 1 Introduction Along with the rapid upgrade of request for adva need desig n methods, more and more desig n tool appeared to support new desig n methods and forms. Desig n in a web en vir onment with multi-part ners being invo Ived requires a more powerful and efficie nt man ageme nt system .Desig n part ners can be located everywhere over the n et with their own organizations. They could be mutually independent experts or teams of tens of employees. This article discussesa task man ageme nt system (TMS) which man ages desig n activities and resources by break ing dow n desig n objectives and re-orga nizing desig n resources in conn ecti on with the activities. Compari ng with com mon information management systems (IMS) like product data management system and docume nt man ageme nt system, TMS can man age the whole desig n process. It has two tiers which make it much more flexible in structure. The lower tier con sists of traditi onal com mon IMSS and the upper one fulfills logic activity management through controlling a tree-like structure, allocating design resources and

建筑学毕业专业外文翻译文献doc资料

本科毕业设计（外文翻译） 题目居住区交往空间规划与设计 院（系部）xxx学院 专业名称xx 年级班级xx 学生姓名xx 指导教师xx xx 年xx 月x 日 Planning and Design of Association Space of residential District

Xia dong liang 【Abstract】:The association space refers to the indoor and outdoor space for communication between residents.The article presents an overall discussion of the necessity，hierarchy and functionality of association space,with a wish to create positive and healthy association atmosphere and stimulate good communication among residents so that the residential area can become a homeland full of love and harmony． 【Keyword】:residential area；association space；necessity；hierarchy；Functionality 【Foreword】：As the housing system reform and the rapid development of real estate, urban residential areas large urban settlements have emerged on the layout of residential buildings, public buildings, public green space, life and living facilities such as roads, to provide urban residents live in the community and The establishment, is an integral part of the city. Exchanges between the living room area residents is to communicate and exchange of indoor and outdoor space. At this stage, people's living standards greatly improved the living environment of continuous improvement district. Developers should not only focus on residential construction and the reasonable comfort, paying greater attention to the construction of residential environment. However, the current environment in the construction of residential areas, they are often the natural ecology of greening the environment is much more to consider, and the promotion of exchanges between the residents of the space environment to consider less, environmental construction can not meet the occupants of the psychological characteristics and needs. From the basic physiological needs gradually to meet the psychological and cultural fields of promoting a higher level, the residential area is not only the function of living, but also people's thinking and feelings of the local exchange. Therefore, the strengthening of exchanges between the residential areas of space construction, increase residential neighbourhood affinity, should be developed in the planning and construction of residential areas should also consider the issue. How to conduct exchanges between the residential areas of space planning and design, improve people's quality of life, the author of his own real estate development

土木工程外文文献翻译

专业资料 学院： 专业：土木工程 姓名： 学号： 外文出处：Structural Systems to resist (用外文写) Lateral loads 附件：1.外文资料翻译译文；2.外文原文。

附件1：外文资料翻译译文 抗侧向荷载的结构体系 常用的结构体系 若已测出荷载量达数千万磅重，那么在高层建筑设计中就没有多少可以进行极其复杂的构思余地了。确实，较好的高层建筑普遍具有构思简单、表现明晰的特点。 这并不是说没有进行宏观构思的余地。实际上，正是因为有了这种宏观的构思，新奇的高层建筑体系才得以发展，可能更重要的是：几年以前才出现的一些新概念在今天的技术中已经变得平常了。 如果忽略一些与建筑材料密切相关的概念不谈，高层建筑里最为常用的结构体系便可分为如下几类： 1.抗弯矩框架。 2.支撑框架，包括偏心支撑框架。 3.剪力墙，包括钢板剪力墙。 4.筒中框架。 5.筒中筒结构。 6.核心交互结构。 7. 框格体系或束筒体系。 特别是由于最近趋向于更复杂的建筑形式，同时也需要增加刚度以抵抗几力和地震力，大多数高层建筑都具有由框架、支撑构架、剪力墙和相关体系相结合而构成的体系。而且，就较高的建筑物而言，大多数都是由交互式构件组成三维陈列。 将这些构件结合起来的方法正是高层建筑设计方法的本质。其结合方式需要在考虑环境、功能和费用后再发展，以便提供促使建筑发展达到新高度的有效结构。这并

不是说富于想象力的结构设计就能够创造出伟大建筑。正相反，有许多例优美的建筑仅得到结构工程师适当的支持就被创造出来了，然而，如果没有天赋甚厚的建筑师的创造力的指导，那么，得以发展的就只能是好的结构，并非是伟大的建筑。无论如何，要想创造出高层建筑真正非凡的设计，两者都需要最好的。 虽然在文献中通常可以见到有关这七种体系的全面性讨论，但是在这里还值得进一步讨论。设计方法的本质贯穿于整个讨论。设计方法的本质贯穿于整个讨论中。 抗弯矩框架 抗弯矩框架也许是低，中高度的建筑中常用的体系，它具有线性水平构件和垂直构件在接头处基本刚接之特点。这种框架用作独立的体系，或者和其他体系结合起来使用，以便提供所需要水平荷载抵抗力。对于较高的高层建筑，可能会发现该本系不宜作为独立体系，这是因为在侧向力的作用下难以调动足够的刚度。 我们可以利用STRESS，STRUDL 或者其他大量合适的计算机程序进行结构分析。所谓的门架法分析或悬臂法分析在当今的技术中无一席之地，由于柱梁节点固有柔性，并且由于初步设计应该力求突出体系的弱点，所以在初析中使用框架的中心距尺寸设计是司空惯的。当然，在设计的后期阶段，实际地评价结点的变形很有必要。 支撑框架 支撑框架实际上刚度比抗弯矩框架强，在高层建筑中也得到更广泛的应用。这种体系以其结点处铰接或则接的线性水平构件、垂直构件和斜撑构件而具特色，它通常与其他体系共同用于较高的建筑，并且作为一种独立的体系用在低、中高度的建筑中。

商业建筑外文文献翻译)

Commercial Buildings Abstract: A guide and general reference on electrical design for commercial buildings is provided. It covers load characteristics; voltage considerations; power sources and distribution apparatus; controllers; services, vaults, and electrical equipment rooms; wiring systems; systems protection and coordination; lighting; electric space conditioning; transportation; communication systems planning; facility automation; expansion, modernization, and rehabilitation; special requirements by occupancy; and electrical energy management. Although directed to the power oriented engineer with limited commercial building experience, it can be an aid to all engineers responsible for the electrical design of commercial buildings. This recommended practice is not intended to be a complete handbook; however, it can direct the engineer to texts, periodicals, and references for commercial buildings and act as a guide through the myriad of codes, standards, and practices published by the IEEE, other professional associations, and governmental bodies. Keywords: Commercial buildings, electric power systems, load characteristics 1. Introduction 1.1 Scope This recommended practice will probably be of greatest value to the power oriented engineer with limited commercial building experience. It can also be an aid to all engineers responsible for the electrical design of commercial buildings. However, it is not intended as a replacement for the many excellent engineering texts and handbooks commonly in use, nor is it detailed enough to be a design manual. It should be considered a guide and general reference on electrical design for commercial buildings. 1.2 Commercial Buildings The term “commercial, residential, and institutional buildings”as used in this chapter, encompasses all buildings other than industrial buildings and private dwellings. It includes office and apartment buildings, hotels, schools, and churches, marine, air, railway, and bus terminals, department stores, retail shops, governmental buildings, hospitals, nursing homes, mental and correctional institutions, theaters, sports arenas, and other buildings serving the public directly. Buildings, or parts of buildings, within industrial complexes, which are used as offices or medical facilities or for similar nonindustrial purposes, fall within the scope of this recommended practice. Today’s commercial buildings, because of their increasing size and complexity, have become more and more dependent upon adequate and reliable electric systems. One can better understand the complex nature of modern commercial buildings by examining the systems, equipment, and facilities listed in 1.2.1. 1.2.2 Electrical Design Elements In spite of the wide variety of commercial, residential, and institutional buildings, some electrical design elements are common to all. These elements, listed below, will be discussed generally in this section and in detail in the remaining sections of this recommended practice. The principal design elements considered in the design of the power, lighting, and auxiliary systems include: 1) Magnitudes, quality, characteristics, demand, and coincidence or diversity of loads and load factors 2) Service, distribution, and utilization voltages and voltage regulation 3) Flexibility and provisions for expansion

建筑学专业毕业设计方案外文翻译二44

毕业设计英文资料翻译 Tran slati on ofthe En glish Docume nts for Graduati on Desig n 课题名称_____________________________________ 院< 系）_____________________________________ 专业 _____________________________________ 姓名 _____________________________________ 学号 _____________________________________ 起讫日期 _____________________________________ 指导教师 _____________________________________ 2018 年2月25日 原文: Abstract：Gree n buildi ng refers to do its best to maximize con servati on of resources (en ergy, land, water, and wood> , protecti ng the environment and reduce polluti on in its life cycle. Provide people with healthy, appropriate and efficient use of space, and nature in harmony symbiosis buildings. Idescribed more details of green building design ' notion, green building ' design, as well as the sig ni fica nee of the con

文献检索课程教学设计(全部)

《文献检索》课程教学设计 目录 绪论：文献（信息）检索的意义及基础 (2) 项目一科技文献检索方法和图书馆的科学利用 (8) 项目二常见化学化工科技论文的写作 (11) 项目三美国化学文摘的使用 (14) 项目四专利文献的查询 (17) 项目五标准文献的查询 (20) 项目六计算机信息检索的应用 (23) 项目七信息检索策略综合应用训练 (26)

徐州工业职业技术学院教学设计（讲稿）

教学内容与设计 绪论：文献（信息）检索的意义及基础 自我介绍 提问一：你会检索吗？ 如果会，那么会用检索以下毕业专题的相关资料吗？ ?杜仲叶中绿原酸的提取分离 ?有机废水处理工艺设计 ?蚕丝蛋白制备工艺研究 ?铁矿石含铁量测定方法新工艺 ?基因工程干扰素生产工艺研究 提问的目的：突出检索技术直接是为毕业专题服务，这是一门技术。提问二：信息检索课是什么？ 学生如是说： 文献检索课程是井底之蛙的升降机，是雄鹰的翅膀，是横跨天堑的桥梁。 针对某一课题，通过电子检索查阅有关资料，才知道知识的浩瀚，才知道世界的宽广，才知道“山外青山，楼外楼”。 它是我在大学期间所学的最重要，最有用的课程之一，有了它，我们将会受益终生。教会我们一种方法，一种主动 了解外界，提高自己，放眼世界的方法。 检索不仅是我们学习的制胜法宝，更是一条贯穿我们生活的红线。正因为有了这门课的学习，现在大脑的检索意识 就比较强烈，越搜越快！前几天，问同学借自行车，他告 诉我车子大致地点，是永久牌，有车栏，略有一点蓝。到 了现场，脑海中一下就有了先找有栏的，再找蓝颜色的， 最后确定是不是永久的，很快就找到了。 我爱检索，就像爱自己的生命一样。 最后我想说，我们是幸运的！我们学到了一门真正有用的课，它对我的影响和帮助将是伴随我一身的。 提问三：借鉴与创新的关系？ 科学研究是“站在前人肩膀上”的事业，而创新又是科学研究的灵魂，即要求“前无古人”。 时间分配 2min 引导学生回答 8min 10min 通过往届学生对信息检索课的评价能够激起学生学习这门课的兴趣，也可以突出这门课对个人的作用。 10min 通过提问让学生

土木工程类专业英文文献及翻译

PA VEMENT PROBLEMS CAUSED BY COLLAPSIBLE SUBGRADES By Sandra L. Houston,1 Associate Member, ASCE (Reviewed by the Highway Division) ABSTRACT: Problem subgrade materials consisting of collapsible soils are com- mon in arid environments, which have climatic conditions and depositional and weathering processes favorable to their formation. Included herein is a discussion of predictive techniques that use commonly available laboratory equipment and testing methods for obtaining reliable estimates of the volume change for these problem soils. A method for predicting relevant stresses and corresponding collapse strains for typical pavement subgrades is presented. Relatively simple methods of evaluating potential volume change, based on results of familiar laboratory tests, are used. INTRODUCTION When a soil is given free access to water, it may decrease in volume, increase in volume, or do nothing. A soil that increases in volume is called a swelling or expansive soil, and a soil that decreases in volume is called a collapsible soil. The amount of volume change that occurs depends on the soil type and structure, the initial soil density, the imposed stress state, and the degree and extent of wetting. Subgrade materials comprised of soils that change volume upon wetting have caused distress to highways since the be- ginning of the professional practice and have cost many millions of dollars in roadway repairs. The prediction of the volume changes that may occur in the field is the first step in making an economic decision for dealing with these problem subgrade materials. Each project will have different design considerations, economic con- straints, and risk factors that will have to be taken into account. However, with a reliable method for making volume change predictions, the best design relative to the subgrade soils becomes a matter of economic comparison, and a much more rational design approach may be made. For example, typical techniques for dealing with expansive clays include: (1) In situ treatments with substances such as lime, cement, or fly-ash; (2) seepage barriers and/ or drainage systems; or (3) a computing of the serviceability loss and a mod- ification of the design to "accept" the anticipated expansion. In order to make the most economical decision, the amount of volume change (especially non- uniform volume change) must be accurately estimated, and the degree of road roughness evaluated from these data. Similarly, alternative design techniques are available for any roadway problem. The emphasis here will be placed on presenting economical and simple methods for: (1) Determining whether the subgrade materials are collapsible; and (2) estimating the amount of volume change that is likely to occur in the 'Asst. Prof., Ctr. for Advanced Res. in Transp., Arizona State Univ., Tempe, AZ 85287. Note. Discussion open until April 1, 1989. To extend the closing date one month,

建筑外文文献及翻译

外文原文 Study on Human Resource Allocation in Multi-Project Based on the Priority and the Cost of Projects Lin Jingjing , Zhou Guohua SchoolofEconomics and management, Southwest Jiao tong University ,610031 ,China Abstract----This paper put forward the a ffecting factors of project’s priority. which is introduced into a multi-objective optimization model for human resource allocation in multi-project environment . The objectives of the model were the minimum cost loss due to the delay of the time limit of the projects and the minimum delay of the project with the highest priority .Then a Genetic Algorithm to solve the model was introduced. Finally, a numerical example was used to testify the feasibility of the model and the algorithm. Index Terms—Genetic Algorithm, Human Resource Allocation, Multi-project’s project’s priority . 1.INTRODUCTION More and more enterprises are facing the challenge of multi-project management, which has been the focus among researches on project management. In multi-project environment ,the share are competition of resources such as capital , time and human resources often occur .Therefore , it’s critical to schedule projects in order to satisfy the different resource demands and to shorten the projects’ duration time with resources constrained ,as in [1].For many enterprises ,the human resources are the most precious asset .So enterprises should reasonably and effectively allocate each resource , especially the human resource ,in order to shorten the time and cost of projects and to increase the benefits .Some literatures have

外文文献—动画讲课教案

外文文献—动画

Animation Animation is the rapid display of a sequence of images of 2-D or 3-D artwork or model positions to create an illusion of movement. The effect is an optical illusion of motion due to the phenomenon of persistence of vision, and can be created and demonstrated in several ways. The most common method of presenting animation is as a motion picture or video program, although there are other methods. Early examples An Egyptian burial chamber mural, approximately 4000 years old, showing wrestlers in action. Even though this may appear similar to a series of animation drawings, there was no way of viewing the images in motion. It does, however, indicate the artist's intention of depicting motion. Five images sequence from a vase found in Iran There is no single person who can be considered the "creator" of film animation, as there were several people working on projects which could be considered animation at about the same time. Georges Méliès was a creator of special-effect films; he was generally one of the first people to use animation with his technique. He discovered a technique by accident which was to stop the camera rolling to change something in the scene, and then continue rolling the film. This idea was later known as stop-motion animation. Early examples of attempts to capture the phenomenon of motion drawing can be found in paleolithic cave paintings, where animals are depicted with multiple legs in superimposed positions, clearly attempting to convey the perception of motion. An Egyptian burial chamber mural , approximately 4000 years old, showing wrestlers in action. Even though this may appear similar to a series of animation drawings, there was no way of viewing the images in motion. It does, however, indicate the artist's intention of depicting motion. A 5,000 year old earthen bowl found in Iran.It has five images of a goat painted along the sides. This has been claimed to be an example of early animation. However, since no equipment existed to show the images in motion, such a series of images cannot be called animation in a true sense of the word. A Chinese zoetrope-type device had been invented in 180 AD. The phenakistoscope, praxinoscope, and the common flip book were early popular animation devices invented during the 19th century. These devices produced the appearance of movement from sequential drawings using technological means, but animation did not really develop much