计算机专业英语相关论文

Development of computer network communication

technology

计算机网络通信技术的发展概况

With the rapid development of science and its application in calculation in the real world, on the one hand, users are in urgent need of different computer soft hardware and information resource which sharing can be achieved. On the other hand, a large class of problems with the geographical distribution, whose processing to distributed computing technology characteristics of these objective requirements led to the birth of the computer network and the development of the computer network system. In recent years, due to the human society, the rapid exchange of information and fast processing needs, as well as driving the rapid development of computer and communication of the two technologies, the computer network has an unprecedented development. The computer network communication technology is the product of computer technology and communication technology combined with the advanced technology,which is one of the fastest development in the world.

随着计算科学及其应用的高速发展，在现实世界中，一方面，用户迫切需要实现不同计算机上软硬件和信息资源的共享，另一方面，有一大类问题本身具有地域上分布，其处理需要分布计算技术的特点这些客观要求导致了计算机网络的发展和网络计算机系统的诞生。近十多年来，由于人类社会对信息快速交换和快

速处理的需求，以及在计算机和通信两大技术飞速发展的驱动下，计算机网络得到空前的发展。计算机网络通信技术是计算机技术与通信技术相结合的产物，是世界上发展最快的前沿技术之一。

computer network is using the communication equipment and communication lines that will be a set of geographic distribution of the same or different computers, terminals and ancillary equipment in accordance with the interconnection of some way up to a computer hardware system. On the basis of the computer hardware system, through the development that coordinate the communication system of the computer system or further network operating system, which can make a group of computer hardware and software resources share with collaborative computing and cooperatively solve a problem. By the communication system or network operating system and computer network together, we can form a network of computer systems.

所谓计算机网络是使用通信设备和通信线路将一组地理上分布的相同或不同的计算机、终端及其附属设备按照某种方式互联起来得到的一个计算机硬件系统。在这种计算机硬件系统的基础上，通过开发能协调各台计算机系统工作的通信系统或更进一步的网络操作系统，就能使一组计算机实现软硬件资源共享、协同计算，合作求解一个问题。由这种通信系统或网络操作系统连同网络计算机一起，就形成了网络计算机系统。

According to the difference of the data transmission range and the realization technology, the computer network is divided into the local computer network and the wide area computer network. Local computer network is a data communication system, the transmission range in secondary geographical area, medium or high speed data transmission rate, which uses a dedicated data communication line or bus communication, connecting a large number of independent equipment in the physical communication channels to communicate with each other. Wide area computer networks is different in cities, different nations, the computer or computer network through hierarchical interconnection technology are connected together, its transmission range can be quite far distance. At present, the most common is the use of a public or private telephone line communication, backbone network and a number of local area network using digital communication of optical fiber and cable data communication are special lines. Network users are connected to the Internet, you can communicate with other network users far beyond the horizon through their computers, through the network software to query a variety of information resources. With the computer network, and in recent years the development of broadband communication medium, and apparatus, and communication data transmission rate will continue to improve, in the future, the use of internet teaching, watching for real-time news shows, online booking and shopping, network video conference, network hospital outpatient, etc., it is no longer science fiction. On the network each computer with a node says the link between machine and machine path lines and says that they constitute a network computer architecture in some of the basic algorithm of mathematical description of the object representation basis

按照数据传输范围和实现技术的不同，计算机网络存在局域计算机网络和广域计算机网络之分。局域计算机网络是一个数据通信系统，其传输范围在中等地理区域，使用中等或高速数据传输速率，使用专用数据通信线或总线进行通信，可联接大量独立设备，在物理通信通道上互相通信。广域计算机网络把不同城市、不同国家中的计算机或计算机网络通过分级互联技术联接起来，其传输范围可达到相当远的距离，目前最常见的是使用公用或专用电话线通信，主干网和一些局域网使用可进行数字通信的光纤光缆数据通信专用线。联接到网上的网络用户，可以通过自己的计算机与远在天边的其他网络用户进行通信，通过网络软件查询网上的各种信息资源。有了计算机网络，加上近年来宽带通信介质和设备的开发，以及通信数据传输速率的不断提高，今后，利用互联网教学、收看实时新闻节目、网上订票和购物、网络电视会议、网络医院门诊，等等，就不再是科学幻想。网络上的每台计算机用一个结点表示机器与机器之间的链路用线和路径表示，他们构成了网络计算机体系结构中一些基本算法研究中数学描述的对象表示基础。

Computer communication network is the combination of computer technology and communication technology, and the formation of a new communication mode, mainly to meet the needs of data communication. It a different geographical area, with independent functions of multiple computers, terminals and ancillary equipment connected by the communication link, and is equipped with the corresponding network software,

communication system to realize the sharing of resources in the communication process and the formation of. It can not only meet the local area of a enterprises, companies, schools and offices of data, files are transferred and in a national and even worldwide for information exchange, storage and processing, at the same time can provide comprehensive services of voice, data and image, has attractive prospects for development. The computer communication revolution has brought the following important facts: data processing equipment (computer) and data communication equipment (exchange transmission equipment) is no longer essentially the difference between. There is no essential difference between data communication, voice communication and video communication. The difference between single processor computer, multi processor computer, local area network, metropolitan area network and remote network is becoming more and more blurred. These trends have led to the gradual integration of the computer industry and the telecommunications industry, from components manufacturing to system integration is the case. Another effect is the development of integrated systems capable of transmitting and processing all types of data and information. Both the technology and formulation of technical standards of the organization, are forced to to completed all communication single public network system development, simple and uniform access to worldwide information sources and all kinds of information through the network to.

计算机通信网络是计算机技术和通信技术相结合而形成的一种新通信方式，主要是满足数据通信的需要。它将不同地理位置、具有独立功能的多台计算机、终端及附属设备用通信链路连接起来，并配备相应的网络软件，以实现通信过程中资源共享而形成的通信系统。它不仅可以满足局部地区的一个企业、公司、学校和办公机构的数据、文件传输需要，而且可以在一个国家甚至全世界范围进行信息交换、储存和处理，同时可以提供话音、数据和图像的综合性服务，具有诱人的发展前景。计算机通信革命带来以下这些重要事实：数据处理设备(计算机)和数据通信设备(交换传输设备)之间不再有本质上的区别。数据通信、话音通信和视频通信之间也不存在本质上的区别。单处理器计算机、多处理器计算机、局域网、城域网和远距离网络之间的区别也日趋模糊。这些趋势导致了计算机产业与通信产业的日趋融合，从元器件制造到系统集成皆是如此。另一影响是发展了能够传输和处理各种类型数据和信息的集成系统。不论是技术本身还是制定技术标准的组织，都被迫向能够完成各种通信的单一的公用网络系统发展，通过这种网络能够简单且统一地访问到全世界的信息源和各种信息。

With the development of high performance computing and communication plan, the concept and construction plan of the information superhighway based on the computer hardware and software technology and the network interconnection technology have been put forward.

And thus starting the global information society construction pace in China because of the attention from the government to all walks of life where a large number of enterprises and institutions are active online to create web sites and provide web site information in many cities which has been provided for the construction of the information society. Rules of national economic and social informatization process are accelerated. Anyway, computer and communication are combined with to form the computer network, the information collection, processing, storage, transport and use of natural information function formed by modern may be based on a variety of information technology in the world, human society and the broader space together, it will be a more profound revolution in information technology. However, opportunities and risks coexist, in today's large-scale information network environment, no matter how perfect the information security means, the risk is always there. Therefore the suitable method is that in the entire network communication process using the intelligent method to carry on the risk management. Through the analysis of the application of intelligent control method control the severity of risk occurrence possibility and its consequences in

the acceptable range, as well as in the economic and social benefits, risks and costs to achieve minimum risk and maximum efficiency goals.

随着高性能计算与通信计划的提出以计算机软硬件技术光纤通讯技术和网络互联技术为基础的信息高速公路的概念和建设计划也被提了出来,并由此启动了全球信息社会的建设步伐在中国由于各方面的重视从政府到各行各业的一大批企事业单位都在积极上网建立网络站点提供网络站点信息不少城市已经提供了信息化社会建设的规则国民经济和社会的信息化进程正在加快。总之，计算机与通信结合形成计算机网络，使信息采集、处理、存贮、传输和利用等五大自然信息功能通过现代可能基础上形成的各种信息技术在全球人类社会这个更宽广的空间综合起来，这将是一场更深刻的信息技术革命。但机遇与风险并存，在当今大规模的信息网络环境下，无论采取多么完善的信息安全手段，风险也总是存在。因而适宜的方法是在整个网络通信过程中应用智能化的方法进行风险管理。通过应用智能化的分析控制方法将风险发生的可能性及其产生后果的严重程度控制在可接受的范围内，在经济与社会效益、风险与费用中寻求达到风险最小、效益最大的目标。

本文档部分内容来源于网络，如有内容侵权请告知删除，感谢您的配合！

计算机英语论文(中英双语)

稀疏表示计算机视觉和模式识别 从抽象技术的现象已经可以开始看到稀疏信号在电脑视觉产生重大影响，通常在非传统的应用场合的目标不仅是要获得一个紧凑的高保真度表示的观察信号，而且要提取语义信息。非常规词典在字典的选择中扮演了重要的角色，衔接的差距或学习、训练样本同来获得自己提供钥匙，解出结果和附加语义意义信号稀疏表示。理解这种非传统的良好性能要求词典把新的算法和分析技术。本文强调了一些典型例子：稀疏信号的表现如何互动的和扩展计算机视觉领域，并提出了许多未解的问题为了进一步研究。 稀疏表现已经被证明具有非常强大的工具，获取、表示、压缩高维信号的功能。它的成功主要是基于这个事实，即重要类型的信号(如声音和图像，稀疏表示很自然地就固定基地或串连这样的基地。此外，高效、大概有效算法说明基于凸优化一书提供了计算这样的陈述。 虽然这些应用在经典信号处理的铺垫下,已经可以在电脑视觉上形成一个我们经常更感兴趣的内容或语义，而不是一种紧凑、高保真的表示。一个人可能会理所当然地知道是否可以有用稀疏表示为视觉任务。答案很大程度上是积极的：在过去的几年里，变化和延伸的最小化已应用于许多视觉任务。 稀疏表示的能力是揭示出语义信息，大部分来自于一个简单但重要的性质数据：虽然照片所展示的图像是在非常高自然的空间，在许多同类应用中图像属于次级结构。也就是说他们在接近低维子空间或层次。如果发现一个收集的样本分布，我们理应期望一个典型的样品有一个稀疏表示理论的基础。 然而，想要成功地把稀疏表示应用于电脑视觉，我们通常是必须面对的一个额外的问题，如何正确选择依据。这里的数据选择不同于在信号处理的传统设置，基于指定的环境具有良好的性能可以被假定。在电脑视觉方面，我们经常要学习样本图像的任务词典，我们不得不用一个连贯的思想来贯穿工作。因此，我们需要扩展现有的理论和稀疏表示算法新情况。 自动人像识别仍然是最具有挑战性的应用领域和计算机视觉的难题。在理论基础实验上，稀疏表示在近期获得了显著的进展。 该方法的核心是选择一个明智的字典作为代表，用来测试信号稀疏线性组合信号。我们首先要简单的了解令人诧异的人脸识别途径是有效的解决办法。反过来，人脸识别实例在稀疏表示光曝光之前揭示了新的理论现象。 之前稀疏表示的部分用机器检查并且应用，在一个完全词典里组成的语义信息本身产生的样品。对于许多数据不是简单的应用，这是合乎情理的词典，使用一个紧凑的数据得到优化目标函数的一些任务。本节概述学习方法那种词典，以及这些方法应用在计算机视觉和图像处理。 通过近年来我们对稀疏编码和优化的应用的理解和启发，如面部识别一节描述的例子，我们提出通过稀疏数据编码构造，利用它建立了受欢迎的机器学习任务。在一个图的数据推导出研究学报。2009年3月5乘编码每个数据稀疏表示的剩余的样本，并自动选择最为有效的邻居为每个数据。通过minimization稀疏表示的计算自然的性能满足净水剂结构。此外，我们将会看到描述之间的关系进行了实证minimization线性数据的性能，可以显著提高现有的基于图论学习算法可行性。 摘自：期刊IEEE的论文- PIEEE ，第一卷

计算机专业英语报告

1.英语学术论文的语言风格特点就（知人方能论世） 为什么我们会读不懂SCI上面的文章呢？ 第一，由于SCI里面出现的专业词汇一般都是出现在特定领域，一类是一词对应于一意，另外一类则是一词多义。 其次，名词化结构则是另外另外一个普遍出现的现象，可以看到，复合名词，加前缀和后缀，以及省略现象可谓是漫山遍野，因为文体要求行文简洁、表达客观、内容确切、信息量大、强调存在的事实，一般文章不会夹杂着太多主观看法。 最后，大量使用长句和定语从句SCI论文发表中大量使用长句和定语从句，在论证上起到连接信息和强调信息的作用。广泛使用被动语态SCI论文发表中侧重叙事推理，强调客观准确，第一、二人称使用过多，会造成主观臆断的印象。因此尽量使用第三人称叙述，采用被动语态。名词作定语和缩写词使用频繁SCI论文发表中要求结构紧凑、行文简炼，缩写词和名词作定语的频繁使用，增大了信息密度，简化了句型。 如果我们能逆向思维，转换个角度去看文章，如果你要发表一篇SCI论文，你会怎么去构造你的行为，你如何组织你文章的逻辑，特别是用词方面，口语和一些狸语在一般

情况不应该出现在文章中。还有些中式英语也会极大地影响我们的阅读，例如说足球比赛，可不是我们想象中的football match （之前有次演讲说，英语里面不能有2个名词的情况，在此就举了个例子bicycle man），而应该做football play亦作soccer play。 2.翻译是一门艺术，从某种意义上来讲是没有标准答案的。 这里本人想要想要阐述这样一种观点，翻译是一个不断精进的过程，翻译最初的目的即是为了实现语言之间的一个互相沟通，然而不同的人对一句话，应该会有着不同的理解。这也就有了译者极大的自由发挥性，但是译者必须准确理解原文的基础之上的。 有三个字可以高度概括翻译的精髓“信，达，雅”，想必大家都应该听过。”“信”指意义不背原文,即是译文要准确,不歪曲,不遗漏,也不要随意增减意思；同样可以举个例子？This is a pan in my hand （请问如何翻译呢？） “达”指不拘泥于原文形式,译文通顺明白;这里就涉及到一个直译和意译的关系啦，否则就会出现像bicycle

计算机专业英语论文

姓名：王雪健学号：201390503 专业：计算机科学与技术3 班学院：信息科学与工程学院 On Information Resources Abstract: With the development of human society, the way people gather information more and more https://www.wendangku.net/doc/8515466922.html,rmation resources as a special social resources, With strategic nature, can spread the properties, it can increase the properties and comprehensive quality characteristics. Information resource with great economic and social value, not only is important to take a new road to industrialization led forces, but also changes the mode of production and social progress in an enormous boost. 1 Introductio Information resources, as a special configuration has a special meaning and forms of social resources, their role is with each passing day growing. Information resources are the basic elements of modern social productive forces, while change in the way of social production and people's way of life enhancement, resulting in an invaluable influence and promote the role. At the same time in the modern society, the content of information resources is continuously expanding to include not only the growing number of natural science information resources, but also times of social science information resources. The availability of information resources and use of attention is whether the growth of a country's comprehensive national strength is an important factor, but also the extent a country is an important symbol of

计算机英语(第4版) 刘艺 课文参考译文

《计算机英语（第4版）》参考译文 第一单元：计算机与计算机科学 课文A：计算机概览 一、引言 计算机是一种电子设备，它能接收一套指令或一个程序，然后通过对数字数据进行运算或对其他形式的信息进行处理来执行该程序。 要不是由于计算机的发展，现代的高科技世界是不可能产生的。不同类型和大小的计算机在整个社会被用于存储和处理各种数据，从保密政府文件、银行交易到私人家庭账目。计算机通过自动化技术开辟了制造业的新纪元，而且它们也增强了现代通信系统的性能。在几乎每一个研究和应用技术领域，从构建宇宙模型到产生明天的气象报告，计算机都是必要的工具，并且它们的应用本身就开辟了人们推测的新领域。数据库服务和计算机网络使各种各样的信息源可供使用。同样的先进技术也使侵犯个人隐私和商业秘密成为可能。计算机犯罪已经成为作为现代技术代价组成部分的许多风险之一。 二、历史 第一台加法机是法国科学家、数学家和哲学家布莱斯?帕斯卡于1642年设计的，它是数字计算机的先驱。这个装置使用了一系列带有10个齿的轮子，每个齿代表从0到9的一个数字。轮子互相连接，从而通过按照正确的齿数向前转动轮子，就可以将数字彼此相加。17世纪70年代，德国哲学家和数学家戈特弗里德?威廉?莱布尼兹对这台机器进行了改良，设计了一台也能做乘法的机器。 法国发明家约瑟夫―玛丽?雅卡尔，在设计自动织机时，使用了穿孔的薄木板来控制复杂图案的编织。在19世纪80年代期间，美国统计学家赫尔曼?何勒里斯，想出了使用类似雅卡尔的木板那样的穿孔卡片来处理数据的主意。通过使用一种将穿孔卡片从电触点上移过的系统，他得以为1890年的美国人口普查汇编统计信息。 1、分析机 也是在19世纪，英国数学家和发明家查尔斯?巴比奇，提出了现代数字计算机的原理。他构想出旨在处理复杂数学题的若干机器，如差分机。许多历史学家认为，巴比奇及其合伙

计算机英文论文

A Preliminary Analysis of the Scienti?c Production of Latin American Computer Science Research Groups Juan F.Delgado-Garcia,Alberto https://www.wendangku.net/doc/8515466922.html,ender and Wagner Meira Jr. Computer Science Department,Federal University of Minas Gerais 31270-901-Belo Horizonte-Brazil {jfdgarcia,laender,meira}@dcc.ufmg.br Abstract.In this paper,we present a preliminary analysis of the sci- enti?c production of Latin American Computer Science research groups. Our analysis is based on data over a period of20years collected from DBLP,and addresses24groups from academic institutions in Argentina, Chile,Colombia,Cuba,Mexico,Peru,Uruguay and Venezuela.Our re- sults show a clear improvement in the publication output of these groups in the last10years,particularly in Argentina,Chile and Mexico. Keywords:Latin America,Computer Science,Scienti?c Production, Coauthorship Analysis,Bibliometrics 1Introduction According to SCIMago Journal and Country Rank(JCR)1,recent years have witnessed a tremendous increase in the scienti?c production in Computer Sci-ence(CS)all over the world.Considering data from2002to2012,for instance,in North America(Canada and USA)the number of publications increased59.73%, in Western Europe(considering only the top-5countries,UK,Germany,France, Italy and Spain)184%,and in Latin American(also considering only the top-5 countries,Brazil,Mexico,Argentina,Chile and Colombia)319%.In other re-gions,countries like Australia,China,Korea,India and Poland have achieved ?gures even higher.Although SCIMago numbers re?ect only publications that appeared in selected journals,they show that CS is a very productive research area with many active research groups spread around the world. In view of this scenario,in this paper we present a preliminary analysis of the scienti?c production of Latin American CS research groups.Our analysis is based on data over a period of20years collected from DBLP2,and addresses 24groups from academic institutions in Argentina,Chile,Colombia,Cuba,Mex-ico,Peru,Uruguay and Venezuela.Despite being the country in Latin America with the highest productivity in the area[4],we have not included Brazil in our analysis for two reasons.First,Brazil is by far the Latin American country 1https://www.wendangku.net/doc/8515466922.html,/countryrank.php 2https://www.wendangku.net/doc/8515466922.html,rmatik.uni-trier.de/~ley/db

计算机英语第三版课文翻译

第一单元：计算机与计算机科学 课文A：计算机概览 一、引言 计算机是一种电子设备，它能接收一套指令或一个程序，然后通过对数字数据进行运算 或对其他形式的信息进行处理来执行该程序。 要不是由于计算机的发展，现代的高科技世界是不可能产生的。不同类型和大小的计算 机在整个社会被用于存储和处理各种数据，从保密政府文件、银行交易到私人家庭账目。计 算机通过自动化技术开辟了制造业的新纪元，而且它们也增强了现代通信系统的性能。在几 乎每一个研究和应用技术领域，从构建宇宙模型到产生明天的气象报告，计算机都是必要的 工具，并且它们的应用本身就开辟了人们推测的新领域。数据库服务和计算机网络使各种各 样的信息源可供使用。同样的先进技术也使侵犯个人隐私和商业秘密成为可能。计算机犯罪 已经成为作为现代技术代价组成部分的许多风险之一。 二、历史 第一台加法机是法国科学家、数学家和哲学家布莱斯.帕斯卡于1642年设计的，它是数 字计算机的先驱。这个装置使用了一系列带有10个齿的轮子，每个齿代表从0到9的一个数字。轮子互相连接，从而通过按照正确的齿数向前转动轮子，就可以将数字彼此相加。17世纪70 年代，德国哲学家和数学家戈特弗里德.威廉.莱布尼兹对这台机器进行了改良，设计了一台 也能做乘法的机器。 法国发明家约瑟夫―玛丽.雅卡尔，在设计自动织机时，使用了穿孔的薄木板来控制复 杂图案的编织。在19世纪80年代期间，美国统计学家赫尔曼.何勒里斯，想出了使用类似雅 卡尔的木板那样的穿孔卡片来处理数据的主意。通过使用一种将穿孔卡片从电触点上移过的 系统，他得以为1890年的美国人口普查汇编统计信息。 1、分析机 也是在19世纪，英国数学家和发明家查尔斯.巴比奇，提出了现代数字计算机的原理。 他构想出旨在处理复杂数学题的若干机器，如差分机。许多历史学家认为，巴比奇及其合伙 人，数学家奥古斯塔.埃达.拜伦，是现代数字计算机的真正先驱。巴比奇的设计之一，分析 机，具有现代计算机的许多特征。它有一个以一叠穿孔卡片的形式存在的输入流、一个保存 数据的“仓库”、一个进行算术运算的“工厂”和一个产生永久性纪录的打印机。巴比奇未 能将这个想法付诸实践，尽管在那个时代它在技术上很可能是可行的。 2、早期的计算机 模拟计算机是19世纪末开始制造的。早期型号是靠转动的轴和齿轮来进行计算的。用任 何其他方法都难以计算的方程近似数值，可以用这样的机器来求得。开尔文勋爵制造了一台 机械潮汐预报器，这实际上就是一台专用模拟计算机。第一次和第二次世界大战期间，机械 模拟计算系统，以及后来的电动模拟计算系统，在潜艇上被用作鱼雷航线预测器，在飞机上 被用作轰炸瞄准具的控制器。有人还设计了另一个系统，用于预测密西西比河流域春天的洪 水。 3、电子计算机 第二次世界大战期间，以伦敦北面的布莱切利公园为工作地点的一组科学家和数学家， 制造了最早的全电子数字计算机之一：“巨人”。到1943年12月，这个包含了1500个真空管 的“巨人”开始运转了。它被以艾伦.图灵为首的小组用于破译德国用恩尼格码加密的无线 电报，他们的尝试大部分是成功的。 除此而外，在美国，约翰.阿塔纳索夫和克利福德.贝里早在1939年就在艾奥瓦州立学院

第一单元课文译文 计算机英语 吕云翔

第一单元启动软件项目 第一部分听说 A. 对话：启动软件项目 （Kevin、Sharon和Jason是三名北京航空航天大学软件学院大学二年级学生。今天，在第四个学期末暑假开始之前，他们正在参加一个班会。） 老师：大家早上好。在这个假期中，大家将要完成一个真正的项目作为你们的课程设计，这里有一些题目，每个人可以根据自己的兴趣和经验来选择，并请在下周之内把你的决定提交给我。 Kevin：对不起，老师，请问一下，这个项目是需要每个人单独完成还是几个同学合作完成呢？ 老师：我推荐团队合作，因为这可以让你学习如何与你的同学携手合作，并且作为一名团队成员，怎样互相交流、分享、表达并了解互相的想法。但是每组成员不要超过4个人。 Sharon：我感兴趣的主题是四季酒店管理信息系统，你呢，Kevin？ Kevin：哦，这也正是我的想法，我想我们可以组成一个小组。嗨，Jason，你愿意加入我们吗？ Jason：哦，好的，我非常愿意！ Sharon：好的，现在让我们讨论一下每个人的职责。 Jason：Kevin善于组织并具有丰富的编程经验，因此我认为他可以作为我们的团队组长或是项目经理，负责指导我们的团队和编程实践。 Sharon：我同意。 Kevin：非常感谢你们的信任。好，我一定会尽我所能。关于我们的项目，我觉得除了编码以外还需要构建一个数据库并实现一组用户界面。 Jason：我对数据库比较感兴趣，我愿意负责建立和管理数据库。 Sharon：我喜欢艺术设计，我认为我可以为项目做用户界面设计和文档撰写的工作。Kevin：哦，不错，看来这是一个很棒的团队，它让我感到很有信心！现在让我们根据项目的各个阶段来大致分配一下任务。作为组长，我来负责需求，Jason负责设计，Sharon负责测试。 Jason：接下来，我们将为我们的项目制定一个粗略的进度计划。 Kevin：我们可以根据老师提供的最初的需求文档来设计并完成用户界面操作，与此同时，Jason可以构建数据库，最后我们一起来完成编码。 Sharon：听起来不错！但是，我担心的是，老师所提供的最初的需求文档对我们的设计来说信息可能不全，所以，我们必须先根据这个文档来做我们的需求分析，并完成一个正式的

计算机专业毕业设计论文(C++)外文文献中英文翻译(Object)[1]

外文资料 Object landscapes and lifetimes Technically, OOP is just about abstract data typing, inheritance, and polymorphism, but other issues can be at least as important. The remainder of this section will cover these issues. One of the most important factors is the way objects are created and destroyed. Where is the data for an object and how is the lifetime of the object controlled? There are different philosophies at work here. C++ takes the approach that control of efficiency is the most important issue, so it gives the programmer a choice. For maximum run-time speed, the storage and lifetime can be determined while the program is being written, by placing the objects on the stack (these are sometimes called automatic or scoped variables) or in the static storage area. This places a priority on the speed of storage allocation and release, and control of these can be very valuable in some situations. However, you sacrifice flexibility because you must know the exact quantity, lifetime, and type of objects while you're writing the program. If you are trying to solve a more general problem such as computer-aided design, warehouse management, or air-traffic control, this is too restrictive. The second approach is to create objects dynamically in a pool of memory called the heap. In this approach, you don't know until run-time how many objects you need, what their lifetime is, or what their exact type is. Those are determined at the spur of the moment while the program is running. If you need a new object, you simply make it on the heap at the point that you need it. Because the storage is managed dynamically, at run-time, the amount of time required to allocate storage on the heap is significantly longer than the time to create storage on the stack. (Creating storage on the stack is often a single assembly instruction to move the stack pointer down, and another to move it back up.) The dynamic approach makes the generally logical assumption that objects tend to be complicated, so the extra overhead of finding storage and releasing that storage will not have an important impact on the creation of an object. In addition, the greater flexibility is essential to solve the general

计算机专业英语教程课文翻译 Ch.1-Section B 柯晓华

计算机专业英语教程课文翻译 Chapter 1 信息技术与第三产业革命 Section B 第三产业革命 第三产业革命是由J.R.概括出来的一种概念和视图，并且在2007年被欧洲议会所认同。纵观历史，经济转变的发生往往伴随着汇聚了新的能源系统的新一代通信技术。这种新的通信方式成为了组织和管理更加复杂的文化的媒介，而这种文化又是由新的能源来源产生的。21世纪，互联网通信技术和可再生能源的结合，带来了第三产业革命。 第三产业革命是以五大支柱为基础的： ·可再生能源的转换。 ·将房屋建筑转变为发电厂。 ·氢能源和其他能源的储存技术。 ·智能电网技术。 ·“轨道的”，电动的、混合动力的、燃料电池为动力的交通运输。 1.五大支柱 ·可再生能源的转换：太阳呢过、风能、氢能、地热能、洋流能?能和生物质能等可再生形式的能量组成了第三产业革命的第一大支柱。虽然这些能源在全球能源结构中只占据了很小的比例，但是它们的增长速度非常之快。这是因为政府把它们当做任务目标，要使这些能源广泛地进入市场和它们不断下降的价格使它们的竞争力不断上升。 ·房屋建筑成为发电厂：新技术的突破，将首次使得这种设想成为可能。我们设计并建造从各种本地的可再生能源中生产所有自身所需能源的房屋，我们能够对房屋建造方式进行重构使房屋变为发电厂。这种商业上和经济上的设想对房地产行业来说是影响深远的。25年内，成千上万的房屋建筑：房子、办公室、商场、工业园区、技术园区，都将会

被建造成发电厂和住宿一体化的形式。这些建筑将能够通过本地所能获得的阳光、风、垃圾、农业和林业废弃物、海浪、抄袭、氢气和地热中收集并产生能量。这些足够的能量将满足人们自身的需求，同时剩余的能量将被相互分享。 ·在每栋建筑物和所有基础设置中部署氢气和其他能源存储技术来存储周期性的能源（其实就是剩余没用到的嘛）。为了能够最大化的利用可再生能源，并且使得成本最小化，必须配备一定的存储方法。这种存储方法，将能够促进这些可再生能源中的（of this energy source根本就是废话~上文有了下文根本不需要有）周期性的剩余能源转化为可靠的资产。电池和一些其他的媒介，与水泵的区别在于，可以提供有限的（能源）存储容量。不过也有一种可得的、广泛的、并且相对高效的存储媒介——氢能。氢能是公认的能够存储各种形式可再生能源的媒介，并且它能够保证在能源生产中稳定和可靠的供应，此外同样重要的是，氢能易于运输。 ·运用互联网技术将每个洲的传输电网转换成一个像互联网一样工作的能源互联电网。这种对世界能源电网的重新配置正在被一些欧洲的能源公司进行试验。它将沿着互联网的线路，使得商业用户和家庭住户能够产生自己所需的能量并相互分享。这种新型的只能电网或者是互联电网，将为电能的产生和传播方式带来革命性的变化。成千万的新的和正在兴起的房屋建筑—房屋、办公室、工厂，将能够转化为或者建设成发电厂。这种发电厂是能够获得当地的可再生能源，如太阳能、风能、地热能、生物能、氢能和海浪能，来产生供应房屋建筑的电能。同时剩余的能量可以通过互联电网与别的用户一起分享。整个过程，就像如今我们通过互联网产生和传播自己的信息给他人一样。 ·略，没啥难度嘛 当这五个支柱汇集到一起，他们组成不可分割的技术平台：一个拥有与它各个组成部分完全不同的属性和功能的应急系统。换言之，每个支柱之间相互协调将会带来一个新的、足

计算机英语论文

学号09710128 计算机英语论文 书名：计算机网络（第四版） 作者：AndrewS.T anenbaum 出版社：清华大学出版社 出版时间：2004年8月 学生姓名袁璇 班级计算机1班 成绩 指导教师(签字) 电子与信息工程系 2011年10月8日

Uses of Computer Networks Before we start to examine the technical issues in detail, it is worth devoting some time to pointing out why people are interested in computer networks and what they can be used for. After all, if nobody were interested in computer networks, few of them would be built. We will start with traditional uses at companies and for individuals and then move on to recent developments regarding mobile users and home networking. 1．Business Applications Many companies have a substantial number of computers. For a example,a company may have separate computers to monitor production, keep track of inventories, and do the payroll. Initially, each of these computers may have worked in isolation from the others, but at some point, management may have decided to connect them to be able to extract and correlate information about the entire company. Put in slightly more general form, the issue here is resource sharing, and the goal is to make all programs, equipment, and especially data available to anyone on the network without regard to the physical location of the resource and the user. An obvious and widespread example is having a group of office workers share a common printer. None of the individuals really needs a private printer, and a high-volume networked printer is often cheaper, faster, and easier to maintain than a large collection of individual printers. However, probably even more important than sharing physical resources such as printers, scanners, and CD burners, is sharing information. Every large and medium-sized company and many small companies are vitally dependent on computerized information. Most companies have customer records, inventories, accounts receivable, financial statements, tax information, and much more online. If all of its computers went down, a bank could not last more than five minutes. A modern manufacturing plant, with a computer-controlled assembly line, would not last even that long. Even a small travel agency or three-person law firm is now highly dependent on computer networks for allowing employees to access relevant information and documents instantly. For smaller companies, all the computers are likely to be in a single office or perhaps a single building, but for larger ones, the computers and employees may be scattered over dozens of offices and plants in many countries. Nevertheless, a sales person in New Y ork might sometimes need access to a product inventory database in Singapore. In other words, the mere fact that a user happens to be 15,000 km away from his data should not prevent him from using the data as though they were local. This goal may be summarized by saying that it is an attempt to end the ''tyranny of geography.'' In the simplest of terms, one can imagine a company's information system as consisting of one or more databases and some number of employees who need to access them remotely. In this model, the data are stored on powerful computers called servers. Often these are centrally housed and maintained by a system administrator. In contrast, the employees have simpler machines, called clients, on their desks, with which they access remote data, for example, to include in spreadsheets they are constructing. (Sometimes we will refer to the human user of the client machine as the ''client,'' but it should be clear from the context whether we mean the computer or its user.) The client and server machines are connected by a network, as illustrated in Fig. 1-1. Note that we have shown the network as a simple oval, without any detail. We will use this form when we mean a network in the abstract sense. When more detail is required, it will be provided.

计算机专业英语的课文与翻译之令狐文艳创作

Unit 8 Computer Networking Text 1 令狐文艳 Text 2 Data Communications The end equipmentcan be computers, printers, keyboards, CRTs, and so on.They are either generates the digital information for transmission oruses the received digital data. This equipment generally operates digital information internally in word units. DTE is data terminal equipment. A station controller (STACO)is the corresponding unit at the secondaries. At one time, the DTE was the last piece of equipment that belonged to the subscriber in a data link system. Between the DTEs, first is the modem, and then is the communications equipment. The communication equipment is owned and maintained by Telco. Data communications equipment (DCE) accepts the serial data stream from the DTE. And DCE converts it to some form of analog signal suitable for transmission on voice-grade lines. At the receive end, the DCE performs the reverse function. It converts the received analog signal to a serial digital data stream.

计算机专业英语论文--硬件概述

题目：计算机硬件概述（Overview of the computer hardware based） 学院：信息技术学院 班级：XXXXXX 学号：XXXXXXXXXX 姓名：XXXX

A computer is a fast and accurate symbol processing system. It can accept, store, process data and produce output results. A computer can automatically process data without human intervention. However, it must be given a set of instruction to guide it, step by step, through processes. The set of instructions is called a program, The program is stored physically inside the machine, making it a program. All computer systems of interest to us are similar. They contain hardware components for input, central processing unit and output. The system on the small-scale is called a microcomputer or minicomputer. Continuing up the size scale, the mainframe computer is one that may offer a faster processing speed and a greater storage capacity than a typical mini. Finally comes the supercomputer, designed to process complex scientific applications，which is the largest and fastest. Although the capacity of computers' storage locations is varied，every computer stores numbers，letters，and other characters in a coded form. Every character in the storage is represented by a string of 0s and 1s，the only digits founded in the binary numbering system. BCD and ASCII are popular computer codes. So, what part of computer hardware that contains it? Computer hardware has four parts: the central processing unit (CPU) and memory, storage hardware, input hardware, and output hardware. The Central Processing Unit Pronounced as separate letters it is the abbreviation for central processing unit. The CPU is the brains of the computer. Sometimes referred to simply as the central processor, but more commonly called processor, the CPU